Synthesis and Characterisation of Silicon Carbide and Graphıte Partıculate Reınforced Hybrıd Copper Matrıx Composıtes

Year 2022, Volume: 6 Issue: 1, 12 - 25, 15.04.2022

Wasiu Ayoola , Stephen Durowaye , Muyideen Bodude , Tosin Orimoyegun , Ola Ajayi , Olujide Oyerinde

Abstract

Effects of graphite (C) and silicon carbide particulates (SiCp) on the morphology, electrical and mechanical properties of C10200 copper (Cu) alloy have been investigated. The Cu alloy was reinforced with blended C and SiCp in varied wt. % by mould casting method to produce Cu-SiCp/C composites. Mechanical, electrical and microstructural properties of the hybrid Cu-SiCp/C composites were investigated. The developed composites exhibited acceptable electrical conductivity despite the addition of SiC/C particulates. The electrical conductivity of the Cu-SiCp/C composites is within the bound limits required in literature. The hybrid composite with 30/50/20 % formulation of Cu/SiCp/C exhibited the highest ultimate tensile strength of 90 N/mm2 and 92 N/mm2 for the 212 µm and 710 µm particle sizes respectively. The composite with 30/50/20 % formulation of Cu/SiCp/C exhibited hardness values of 28.7 HB and 30 HB for the 212 µm and 710 µm particle sizes respectively. The addition of SiCp/C appreciably increased the tensile strength and hardness of the composites.

Keywords

Graphite, Silicon Carbide, Copper Alloy, Mould Casting, Hybrid Composites

References

• [1] P. Madhukar, N. Selvaraj, C.S.P. Rao, Manufacturing of aluminium nano hybrid composites: a state of review, Proc. IOP Conference Series: Materials Science and Engineering. 149 (2016) 1-12.
• [2] S.N. Alam, H. Singh, Development of copper-based metal matrix composites: an analysis by SEM, EDS and XRD, Microscopy and Analysis. 28(4) (2014) 8-13.
• [3] S. Abulais, V. Yadav, A. Muley, Fabrication and characterization of copper matrix hybrid composite, International Journal of Mechanical and Production Engineering. 4(9) (2016) 1-4.
• [4] K.A. Alaneme, B.U. Udoni, Mechanical, wear and corrosion behavior of copper matrix composites reinforced with steel machining chips, Engineering Science and Technology, an International Journal. 19(3) (2016) 1593-1599.
• [5] P.P. Rao, J.P. Kumar, R. Rahul, Production of copper metal matrix composite through powder metallurgy route, International Journal of Engineering Technology Science and Research. 4(12) (2017) 855-864.
• [6] V.K. Singh, S. Chauhan, P. Gope, A. Chaudhary, Enhancement of wettability of aluminum based silicon carbide reinforced particulate metal matrix composite, High Temperature Materials and Processes. 34(2) (2014) 163-170.
• [7] E. Akca, E. Trgo, Metallographic procedures and analysis – a review, Periodicals of Engineering and Natural Sciences. 3(2) (2015) 9-11.
• [8] ASTM E8, Standard test method for tension testing of metallic materials, ASTM International, West Conshohocken, PA, USA. 2016.
• [9] ASTM E10-01E1, Standard test method for Brinell hardness of metallic materials, ASTM International, West Conshohocken, PA, USA. 2001.
• [10] W.D. Callister, R. Balasubramaniam, Materials Science and Engineering, 7th Edition, Wiley Pvt., Ltd., 4435, New Delhi, India. 2011.
• [11] D.S. Prasad, C. Shoba, N. Ramanaiah, Investigations on mechanical properties of aluminum hybrid composites, Journal of Materials Research and Technology. 3(1) (2014) 79-85.
• [12] S. Kalpakjian, S.R. Schmid, K.S.V. Sekar, Manufacturing Engineering and Technology, 7th Edition, Pearson Education, Pte Ltd., Singapore, South Asia. 2014.
• [13] P.R. Silva, Electrical conductivity of metals: a new look at this subject, Progress in Physıcs. 10(2) (2014) 121-125.
• [14] B. Johnston, Mechanics of Materials, 5th Edition, McGraw- Hill, New York, USA. 2006.
• [15] R. Abbaschian, L. Abbaschian, R.E. Reed-Hill, Physical Metallurgy Principles, 4th Edition, USA. 2009.
• [16] M. Dimitrios, Role of segregation and precipitates on interfacial strengthening mechanisms in metal matrix composites when subjected to thermomechanical processing, PhD Thesis, Sheffield Hallam University, England, UK. 2009.