Analyzing High Efficiency Asynchronous Motors Using Scalar Control Technique

Year 2018, Volume: 6 , 23 - 26, 01.04.2018

Hasan Uzun Onur Akar , Alpaslan Demırcı , M. CANER Akuner , UMIT K: Terzi

https://doi.org/10.17694/bajece.410219

Cited By: 2

Abstract

In industry, more than half of the total
electrical energy produced in developed countries is converted into mechanical
energy by electric motors. The usage rate of asynchronous motors is estimated
to be 90% of all electric motors. For these motors, an improvement in
efficiency may result in huge savings. These electric motors which have
minimized losses can be improved with speed control drives to be more efficient
in terms of energy consumption and performance. In speed control drives of asynchronous
motors widely used in industry; scalar, vector control and direct torque
control are used.

In this study, in a Matlab/Simulink environment,
high efficiency and standard asynchronous motors with the same characteristics
were driven with scalar control technique and the simulations were compared in
detail. From the point of view of both speed control performance and energy
saving, it observed that high efficiency motors have more advantages. 

Keywords

Asynchronous motor, High Efficiency Motors, Speed Control, Scalar Control

References

• [1] H. Uzun, “Yüksek Verimli ve Standart Asenkron Motorların Farklı Hız Kontrol Yöntemleri Kullanılarak Karşılaştırılması”, Master Thesis, Marmara University, Istanbul, Turkey, 2013.
• [2] H. Uzun, M. C. Aküner, İ. Temiz, & E. Hüner, (2012). “Comparison of high efficiency and standard induction motors with different speed control methods”, Energy Education Science and Technology Part A Energy Science and Research. Sayı SI-1. Cilt 30 sf 533-538.
• [3] C. Tekin, “Yuksek Verimli Asenkron Motorların Analizi” Master Thesis, Marmara University, Istanbul, Turkey, 2008 [in Turkish].
• [4] F. Akova, “Elektrik Motor Sistemlerinde Enerji Verimliligine Bakis. Verimli Endustriyel Komponentler Ic ve Dis Tic Ltd Sti” [Online]. Available: www.uevf.com.tr/uevf1/sunumlar/ot08-05.doc. [Accessed: August 16, 2011]. [in Turkish].
• [5] E. Goren, “Elektrik Motoru ve Hiz Kontrol Sistemleri ile Enerji Verimliligi. Siemens San ve Tic AS” [Online]. Available: www.uevf.com.tr/uevf1/sunumlar/ot08-01.doc, [Accesses: August 16, 2011] [in Turkish].
• [6] MK .SariogIu, M . Gokasan, S. Bogosyarı, “Asenkron Makinalar ve Kontrolu”, Birsen Print House, Istanbul, 2003 [in Turkish]. [7] B. Widell, D. Danfoss, L. Park, “High Efficiency Motors And Nuisance Starting Trips”, Illinois, USA, 2007.
• [8] J. Pyrhonen, J. Haataja, K. Luostarinen, “High Efficient Induction Motors”, Lappeenranta University of Technology.
• [9] [Online].Available:www.energysc.org/energy_tips.html high_efficiency_MOTORS.PDF, [ACCESSES: AUGUST 10, 2011].
• [10] ABB. ACS 800 Programlama Kilavuzu [in Turkish].
• [11] S. Dursun, “Energy utilization and energy efficiency”, Ener Educ Sci Tech 2005;15:59−70.
• [12] N. Ozturk, “Yumusak Anahtarlamalı Asenkron Motorun Dolaylı Vektor Denetiminin Gerceklestirilmesi”, PhD Thesis, Gazi University, Ankara, Turkey, 2006.
• [13] A. Saygin, “Asenkron Motor Hiz Kontrolunun Matris Konverter ile Hizinin Denetlenmesi”, PhD. Thesis, Gazi University, Ankara, Turkey, 2004 [in Turkish].
• [14] OA. Karaman, “Dogrudan Moment Kontrollu Motor Surucu Sisteminin Incelenmesi”, Master Thesis, Firat University Elazig, Turkey, 2010 [in Turkish].
• [15] MK. SariogIu, M. Gokasan, S. Bogosyari, “Asenkron Makinalar ve Kontrolu”, Birsen Print House, Istanbul, 2003 [in Turkish].
• [16] A. Boglietti, A. Cavagnino, M. Lazzari, M. Pastorelli, “International Standards for the Induction Motor Efficiency Evaluation: A Critical Analysis of the Stray-Load Loss Determination”, 2003.
• [17] J. Lepka, P. Stekl, “3-Phase AC Induction Motor Vector Control Using a 56F80x, 56F8100 or 56F8300 Device. Design of Motor Control Application”, 2005.
• [18] A. Hazzab, M. Rahli, B. Kamli, B. Mazari, “Direct Field-Oriented Control Design using Backstepping Technique for Induction Motor Speed Control”, University of Sciences and Technology of Oran, Algeria, 2009.