Research Article
BibTex RIS Cite

Chemical and Morphological Properties of Apricot Wood (Prunus armeniaca L.) and Fruit Endocarp

Year 2018, Volume: 20 Issue: 2, 205 - 209, 16.08.2018

Abstract

This study examined some of the chemical and morphological
properties of apricot wood (Prunus
armeniaca
L.) and fruit
endocarp. According to results, the holocellulose, alphacellulose, and lignin
ratios of apricot wood were found to be 79.50%, 42.33% and 16.43% respectively.
The holocellulose, alphacellulose, and lignin ratios of the apricot fruit
endocarp were determined to be 79.33%, 28.65%, and 36.22%, respectively. In
morphological terms, the apricot fruit endocarp has not been found to be
suitable for paper manufacturing but it can be used for board manufacturing.
And also, apricot wood is similar to the hardwood species that have industrial
value, so it is a convenient raw material for pulp production.

References

  • Akkayan, SC (1983). Sarıçam (P. sylvestris L.), Kızılçam (P. brutia Ten) ile Doğu Kayını (Fagus orientalis Lipky), Kavak (P. euroamericana c.v. I-214), Okaliptus (E. camaldulensis Dehnh.) Odunlarından Elde Edilen Selüloz Karışımları, Özellikleri ve Kağıt Üretiminde Kullanılabilme Olanakları Üzerinde Araştırmalar. İ.Ü. Orman Fak. Derg., Seri A, 33 (1): 104-132.
  • Alaejos J, López F, Pérez A, Rodríguez A, Jiménez L (2008). Influence of the holm oak soda pulping conditions on the properties of the resulting paper sheets. Bioresource Technology, 99(14): 6320-6324.
  • Alkan C (2004). Türkiye’nin Onemli Yaprakli ve Igne Yaprakli Agac Odunlarinin Mikrografik Yonden Incelenmesi - Micrographic investigation of Turkey’s important Woods of Hardwood and Softwood Species, Zonguldak Karaelmas Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, Master’s Thesis, Zonguldak.
  • Bostanci, S (1987). Kagıt Hamuru Uretim ve Agartma Teknolojisi. K.T.U. Basimevi, Trabzon
  • Browning, BL (1967). Methods of Wood Chemistry. Institute of Paper Chemistry Appleton, Wisconsin, America.
  • Copur, Y, Guler, C, Akgul M, Tascioglu C (2007). Some chemical properties of hazelnut husk and its suitability for particleboard production. Building and Environment, 42(7): 2568-2572.
  • Eroglu, H (1990). Kagit Hamuru ve Kagit Fizigi. Karadeniz Teknik Üniversitesi, 2.Baski, Yayin No:90, p. 132, Trabzon.
  • Eroglu, H (2003). Kagit Hamuru ve Kagit Fizigi Ders Notlari, Zonguldak Karaelmas Universitesi, Yayin No: 27, Bartin.
  • Gezer, I (1999). Determination of Relationships Between Spring Rigidity and Some Other Tree Properties in Apricot Trees with Respect to Harvesting Technique. Tr. J. of Agriculture and Forestry, 23(5): 1065-1069.
  • Gezer, I, Haciseferogulları, H, Ozcan, MM Arslan, D, Asma, BM, Unver, A (2011). Physico-Chemical Properties of Apricot (Prunus armeniaca L.) Kernels. South Western Journal of Horticulture, Biology and Environment. 2(1): 1-13.
  • Hacke, UG, Sperry, JS, Pittermann, J (2000). Drought experience and cavitation resistance in six shrubs from the Great Basin, Utah. Basic and Applied Ecology, 1: 31–41.
  • Hale, JD (1969). The Pulping of Wood. Second Edition, Volume 1, McGraw Hill, New York, p.11.
  • Karlsson, H (2006). Fibre Guide, Fibre analysis and process applications in the pulp and paper industry. Printed at, Elanders Tofters, Sweden, p.10.
  • Kiaei, M., Tajik, M., Vaysi, R. 2014. Chemical and biometrical properties of plum wood and its application in pulp and paper production. Maderas. Ciencia y tecnología, 16(3), 313–322.
  • Kirci, H (2003). Kagit Hamuru Endüstrisi Ders Notlari. Karadeniz Teknik Üniversitesi Orman Fakültesi Yayın, No: 72, Trabzon.
  • Lessard, FG, Chouinard A (1980). Properties and utilization of Philippine erect bamboos. Proceedings of the International Seminar on Bamboo Research in Asia, Singapore, May 28-30, p.194.
  • Pakhala, KA, Paavilainen, L, Mela, T (1993). Grass species as a raw material for pulp and paper. Proceedings of the XVII International Grassland Congress, Palmerston North, New Zealand, and Queensland, February 8-21, pp.55-60.
  • Panshin, AJ, deZeeuw, C (1970). Textbook of Wood Technology, 3rd ed. New York: McGraw-Hill: 705 p. Vol. 1.
  • Suchsland, O, Woodson, GE (1986). Fiber Manufacturing Practices in the United States, United States Department of Agriculture Forest Service, No: 640, p.19.
  • Tank, T (1980). Lif ve Selüloz Teknolojisi I, İstanbul Üniversitesi Orman Fakültesi Dergisi, Yayın No: 272, 159 s, İstanbul.
  • TAPPI T 222-om02 (2002). Acid insoluble lignin in wood pulp. 15 Technology Parkway South, Suite 115 Peachtree Corners, GA.
  • TAPPI T 207-cm99 (1999). Water solubility of wood and pulp. 15 Technology Parkway South, Suite 115 Peachtree Corners, GA.
  • TAPPI T 204-cm97 (1997). Solvent extractives of wood and pulp. 15 Technology Parkway South, Suite 115 Peachtree Corners, GA.
  • TAPPI T 11 os-75 (1975). Preparation of wood for chemical analysis. 15 Technology Parkway South, Suite 115 Peachtree Corners, GA.
  • TAPPI T 203 os-71 (1975). Alpha, beta and gamma cellulose in pulp. 15 Technology Parkway South, Suite 115 Peachtree Corners, GA.
  • Yaman. B, Gencer, A (2005). Trabzon koşullarında yetiştirilen Kiwi (Actinidia deliciosa (A. Chev.) C.F. Liang & A.R. Ferguson)'nin lif morfolojisi. Süleyman Demirel Üniversitesi Orman Fakültesi Dergisi, A (2): 149-155.

Kayısı (Prunus armeniaca L.) Odunu ve Meyve Endokarpının Kimyasal ve Morfolojik Özellikleri

Year 2018, Volume: 20 Issue: 2, 205 - 209, 16.08.2018

Abstract

Bu çalışmada kayısı (Prunus
armeniaca
L.) odunu ve meyve endokarpınun bazı kimyasal ve morfolojik
özellikleri incelenmiştir. Araştırma sonuçlarına göre, kayısı odununun
holoselüloz, alfaselüloz ve lignin içerikleri sırasıyla %79.5, %42.33 ve %16.43
olarak bulunmuştur. Aynı şekilde meyve endokarpınun oranları sırasıyla %79.33,
%28.65, ve %36.22 olarak tespit edilmiştir. Morfolojik olarak ele alındığında meyve
kabuklarının kâğıt üretimine uygun olmadığı fakat levha üretiminde
kullanılabileceği tespit edilmiştir. Bunlara ilaveten kayısı odununun diğer
endüstriyel değeri olan yapraklı ağaç odunlarıyla benzer özellik gösterdiği ve
bu nedenle kâğıt hamuru üretimi için uygun bir hammadde olduğu belirtilmiştir.

References

  • Akkayan, SC (1983). Sarıçam (P. sylvestris L.), Kızılçam (P. brutia Ten) ile Doğu Kayını (Fagus orientalis Lipky), Kavak (P. euroamericana c.v. I-214), Okaliptus (E. camaldulensis Dehnh.) Odunlarından Elde Edilen Selüloz Karışımları, Özellikleri ve Kağıt Üretiminde Kullanılabilme Olanakları Üzerinde Araştırmalar. İ.Ü. Orman Fak. Derg., Seri A, 33 (1): 104-132.
  • Alaejos J, López F, Pérez A, Rodríguez A, Jiménez L (2008). Influence of the holm oak soda pulping conditions on the properties of the resulting paper sheets. Bioresource Technology, 99(14): 6320-6324.
  • Alkan C (2004). Türkiye’nin Onemli Yaprakli ve Igne Yaprakli Agac Odunlarinin Mikrografik Yonden Incelenmesi - Micrographic investigation of Turkey’s important Woods of Hardwood and Softwood Species, Zonguldak Karaelmas Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, Master’s Thesis, Zonguldak.
  • Bostanci, S (1987). Kagıt Hamuru Uretim ve Agartma Teknolojisi. K.T.U. Basimevi, Trabzon
  • Browning, BL (1967). Methods of Wood Chemistry. Institute of Paper Chemistry Appleton, Wisconsin, America.
  • Copur, Y, Guler, C, Akgul M, Tascioglu C (2007). Some chemical properties of hazelnut husk and its suitability for particleboard production. Building and Environment, 42(7): 2568-2572.
  • Eroglu, H (1990). Kagit Hamuru ve Kagit Fizigi. Karadeniz Teknik Üniversitesi, 2.Baski, Yayin No:90, p. 132, Trabzon.
  • Eroglu, H (2003). Kagit Hamuru ve Kagit Fizigi Ders Notlari, Zonguldak Karaelmas Universitesi, Yayin No: 27, Bartin.
  • Gezer, I (1999). Determination of Relationships Between Spring Rigidity and Some Other Tree Properties in Apricot Trees with Respect to Harvesting Technique. Tr. J. of Agriculture and Forestry, 23(5): 1065-1069.
  • Gezer, I, Haciseferogulları, H, Ozcan, MM Arslan, D, Asma, BM, Unver, A (2011). Physico-Chemical Properties of Apricot (Prunus armeniaca L.) Kernels. South Western Journal of Horticulture, Biology and Environment. 2(1): 1-13.
  • Hacke, UG, Sperry, JS, Pittermann, J (2000). Drought experience and cavitation resistance in six shrubs from the Great Basin, Utah. Basic and Applied Ecology, 1: 31–41.
  • Hale, JD (1969). The Pulping of Wood. Second Edition, Volume 1, McGraw Hill, New York, p.11.
  • Karlsson, H (2006). Fibre Guide, Fibre analysis and process applications in the pulp and paper industry. Printed at, Elanders Tofters, Sweden, p.10.
  • Kiaei, M., Tajik, M., Vaysi, R. 2014. Chemical and biometrical properties of plum wood and its application in pulp and paper production. Maderas. Ciencia y tecnología, 16(3), 313–322.
  • Kirci, H (2003). Kagit Hamuru Endüstrisi Ders Notlari. Karadeniz Teknik Üniversitesi Orman Fakültesi Yayın, No: 72, Trabzon.
  • Lessard, FG, Chouinard A (1980). Properties and utilization of Philippine erect bamboos. Proceedings of the International Seminar on Bamboo Research in Asia, Singapore, May 28-30, p.194.
  • Pakhala, KA, Paavilainen, L, Mela, T (1993). Grass species as a raw material for pulp and paper. Proceedings of the XVII International Grassland Congress, Palmerston North, New Zealand, and Queensland, February 8-21, pp.55-60.
  • Panshin, AJ, deZeeuw, C (1970). Textbook of Wood Technology, 3rd ed. New York: McGraw-Hill: 705 p. Vol. 1.
  • Suchsland, O, Woodson, GE (1986). Fiber Manufacturing Practices in the United States, United States Department of Agriculture Forest Service, No: 640, p.19.
  • Tank, T (1980). Lif ve Selüloz Teknolojisi I, İstanbul Üniversitesi Orman Fakültesi Dergisi, Yayın No: 272, 159 s, İstanbul.
  • TAPPI T 222-om02 (2002). Acid insoluble lignin in wood pulp. 15 Technology Parkway South, Suite 115 Peachtree Corners, GA.
  • TAPPI T 207-cm99 (1999). Water solubility of wood and pulp. 15 Technology Parkway South, Suite 115 Peachtree Corners, GA.
  • TAPPI T 204-cm97 (1997). Solvent extractives of wood and pulp. 15 Technology Parkway South, Suite 115 Peachtree Corners, GA.
  • TAPPI T 11 os-75 (1975). Preparation of wood for chemical analysis. 15 Technology Parkway South, Suite 115 Peachtree Corners, GA.
  • TAPPI T 203 os-71 (1975). Alpha, beta and gamma cellulose in pulp. 15 Technology Parkway South, Suite 115 Peachtree Corners, GA.
  • Yaman. B, Gencer, A (2005). Trabzon koşullarında yetiştirilen Kiwi (Actinidia deliciosa (A. Chev.) C.F. Liang & A.R. Ferguson)'nin lif morfolojisi. Süleyman Demirel Üniversitesi Orman Fakültesi Dergisi, A (2): 149-155.
There are 26 citations in total.

Details

Primary Language English
Journal Section Biomaterial Engineering, Bio-based Materials, Wood Science
Authors

Saadettin Murat Onat 0000-0003-1749-0619

Ayhan Gençer This is me

Ufuk Özgül This is me

Gökhan Gündüz

Barbaros Yaman

Hikmet Yazıcı This is me

Publication Date August 16, 2018
Published in Issue Year 2018 Volume: 20 Issue: 2

Cite

APA Onat, S. M., Gençer, A., Özgül, U., Gündüz, G., et al. (2018). Chemical and Morphological Properties of Apricot Wood (Prunus armeniaca L.) and Fruit Endocarp. Bartın Orman Fakültesi Dergisi, 20(2), 205-209.


Bartin Orman Fakultesi Dergisi Editorship,

Bartin University, Faculty of Forestry, Dean Floor No:106, Agdaci District, 74100 Bartin-Turkey.

Fax: +90 (378) 223 5077, Fax: +90 (378) 223 5062,

E-mail: bofdergi@gmail.com