NOHUT (Cicer arietinum) SAPI KAĞIT HAMURLARININ KARAKTERİZASYONU VE KAĞIT ÜRETİMİNDE DEĞERLENDİRİLMESİ

Year 2022, Volume: 6 Issue: 1, 29 - 37, 31.03.2022

Mustafa Çiçekler , Ayşe Özdemir , Ahmet Tutuş

https://doi.org/10.30516/bilgesci.1038727

Abstract

In this study, the evaluability of chickpea stalks generated after harvest in chickpea production was investigated in pulp and paper production. Besides, paper production was carried out by blending the chickpea stalk fibers with primary and secondary fibers in certain proportions and the effects of chickpea stalk fibers on the paper properties were determined. Modified kraft method was used in the pulping of chickpea stalks and anthraquinone (AQ) was added to the cooking solution as a catalyst. Some chemical, mechanical and optical properties of the pulps produced with the addition of different AQ charges were compared and the optimum results were obtained from the 0.7% AQ added cooking experiment. The yield and viscosity values of the chickpea stalk pulps increased by 12.6% and 34.2%, respectively and the kappa number decreased by 46.7% with the addition of AQ to cooking liquor. Paper production was carried out by blending the fibers obtained from optimum cooking condition with primary and secondary fibers in certain rates and the effects of chickpea stalk fibers on the paper properties were examined. Depending on the amount of chickpea stalk fibers, the mechanical properties of the papers produced with secondary fibers and the optical properties of the papers produced with primary fibers improved. The strength losses that occur during the recycling of waste paper could be reduced by blending the chickpea stalk fibers with secondary fibers and it is possible to produce various paper types such as writing-printing paper by blending the short fiber chickpea stalk fibers and long fibers.

Keywords

Chickpea stalk, pulp, paper, anthraquinone, primary fiber, secondary fiber

Characterization of Chickpea (Cicer arietinum) Stalk Pulp and Evaluation in Paper Production

Abstract

In this study, the evaluability of chickpea stalks generated after harvest in chickpea production was investigated in pulp and paper production. Besides, paper production was carried out by blending the chickpea stalk fibers with primary and secondary fibers in certain proportions and the effects of chickpea stalk fibers on the paper properties were determined. Modified kraft method was used in the pulping of chickpea stalks and anthraquinone (AQ) was added to the cooking solution as a catalyst. Some chemical, mechanical and optical properties of the pulps produced with the addition of different AQ charges were compared and the optimum results were obtained from the 0.7% AQ added cooking experiment. The yield and viscosity values of the chickpea stalk pulps increased by 12.6% and 34.2%, respectively and the kappa number decreased by 46.7% with the addition of AQ to cooking liquor. Paper production was carried out by blending the fibers obtained from optimum cooking condition with primary and secondary fibers in certain rates and the effects of chickpea stalk fibers on the paper properties were examined. Depending on the amount of chickpea stalk fibers, the mechanical properties of the papers produced with secondary fibers and the optical properties of the papers produced with primary fibers improved. The strength losses that occur during the recycling of waste paper could be reduced by blending the chickpea stalk fibers with secondary fibers and it is possible to produce various paper types such as writing-printing paper by blending the short fiber chickpea stalk fibers and long fibers.

Keywords

Chickpea stalk, pulp, paper, anthraquinone, primary fiber, secondary fiber

References

• Akgül, M., Erdönmez, İ., Çiçekler, M., Tutuş, A. (2018). The Investigations on Pulp and Paper Production with Modified Kraft Pulping Method from Canola (Brassica napus L.) Stalks. Kastamonu University Journal of Forestry Faculty, 18(3), 357–365. https://doi.org/10.17475/kastorman.499091
• Ateş, S., Deniz, İ., Kirci, H., Atik, C., Okan, O. T. (2014). Comparison of pulping and bleaching behaviors of some agricultural residues. Turkish Journal of Agriculture and Forestry, 39(1), 144–153. https://doi.org/10.3906/tar-1403-41
• Barbash, V. A., Yashchenko, O. V. (2020). Preparation and application of nanocellulose from non-wood plants to improve the quality of paper and cardboard. Applied Nanoscience, 10(8), 2705–2716. https://doi.org/10.1007/s13204-019-01242-8
• Bian, H., Gao, Y., Luo, J., Jiao, L., Wu, W., Fang, G., Dai, H. (2019). Lignocellulosic nanofibrils produced using wheat straw and their pulping solid residue: From agricultural waste to cellulose nanomaterials. Waste Management, 91, 1–8. https://doi.org/10.1016/j.wasman.2019.04.052
• Biermann, C. J. (1993). Essentials of pulping and papermaking. Academic press.
• Camarero, S., García, O., Vidal, T., Colom, J., del Río, J. C., Gutiérrez, A., Gras, J. M., Monje, R., Martínez, M. J., Martínez, Á. T. (2004). Efficient bleaching of non-wood high-quality paper pulp using laccase-mediator system. Enzyme and Microbial Technology, 35(2–3), 113–120. https://doi.org/10.1016/j.enzmictec.2003.10.019
• Cicekler, M., Tutus, A. (2021). Effects of cellulase enzyme in deinking of Solvent-Based inks from mixed office wastes. Biocatalysis and Biotransformation, 39(2), 152–160. https://doi.org/10.1080/10242422.2020.1834538
• Clark, J. A. (1978). Pulp Technology. Miller Freeman Publications.
• Dai, Y., Sun, Q., Wang, W., Lu, L., Liu, M., Li, J., Yang, S., Sun, Y., Zhang, K., Xu, J., Zheng, W., Hu, Z., Yang, Y., Gao, Y., Chen, Y., Zhang, X., Gao, F., Zhang, Y. (2018). Utilizations of agricultural waste as adsorbent for the removal of contaminants: A review. In Chemosphere (Vol. 211, pp. 235–253). https://doi.org/10.1016/j.chemosphere.2018.06.179
• FAO. (2020). Food and Agriculture Organization of the United Nations. http://www.fao.org/faostat/en/#data/FO
• Fišerová, M., Gigac, J., Melník, P. (2006). Application of anthraquinone in kraft pulping of beech wood. Wood Research, 51(4), 55–68.
• Güler, G., Beram, A., (2018). Investigation of physical, mechanical and surface roughness properties of particleboards produced from chicory (Cichorium intybus L.) stalks. Journal of Bartin Faculty of Forestry, 20(2): 216-222. https://doi.org/10.24011/barofd.426424
• Gündüz, G., Așık, N., Aydemir, D., Kılıç, A. (2014). The production and characterization of bacterial cellulose. Düzce University Faculty of Forestry Journal of Forestry, 10(2), 1–10.
• Hapani, U., Highland, H., George, L. B. (2020). Eco-friendly extraction and characterization of cellulose from fenugreek (Trigonella foenum-gracum l.) stem. Journal of Experimental Biology and Agricultural Sciences, 8(4), 479–488. https://doi.org/10.18006/2020.8(4).479.488
• Hassan, N. H. M., Muhammed, S., Ibrahim, R. (2013). Effect of soda-anthraquinone pulping conditions and beating revolution on the mechanical properties of paper made from Gigantochloa scortechinii (Semantan bamboo). Malaysian Journal of Analytical Sciences, 17(1), 75–84.
• Hiltunen, E., Paulapuro, H. (2011). Effect of long-fibred reinforcement pulp on mechanical properties of short fibred-based paper. O Papel, 72(8), 42–48.
• Hubbe, M. A., Pawlak, J. J., Koukoulas, A. A. (2008). Paper’s appearance: A review. In BioResources (Vol. 3, Issue 2, pp. 627–665). https://doi.org/10.15376/biores.3.2.627-665
• Jordan, J. H., Easson, M. W., Thompson, S., Wu, Q., Condon, B. D. (2021). Lignin-containing cellulose nanofibers with gradient lignin content obtained from cotton gin motes and cotton gin trash. Cellulose, 28(2), 757–773. https://doi.org/10.1007/s10570-020-03549-0
• Khristova, P., Kordsachia, O., Patt, R., Karar, I., Khider, T. (2006). Environmentally friendly pulping and bleaching of bagasse. Industrial Crops and Products, 23(2), 131–139. https://doi.org/10.1016/j.indcrop.2005.05.002
• Larsson, P. T., Lindström, T., Carlsson, L. A., Fellers, C. (2018). Fiber length and bonding effects on tensile strength and toughness of kraft paper. Journal of Materials Science, 53(4), 3006–3015. https://doi.org/10.1007/s10853-017-1683-4
• Li, Y. I., Kim, D. Z. (2018). Fiber Length, coarseness and their effects on paper structural properties. Chung-Kuo Tsao Chih/China Pulp and Paper, 37(7), 49–52. https://doi.org/10.11980/j.issn.0254-508X.2018.07.009
• Liu, X., Jiang, Y., Xie, Q., Nie, S., Song, X. (2017). Effect of alkali pectinase pretreatment on bagasse soda-anthraquinone pulp. BioResources, 12(3). https://doi.org/10.15376/biores.12.3.5045-5056
• Madakadze, I. C., Radiotis, T., Li, J., Goel, K., & Smith, D. L. (1999). Kraft pulping characteristics and pulp properties of warm season grasses. Bioresource Technology, 69(1), 75–85. https://doi.org/10.1016/S0960-8524(98)00131-X
• Mancera, C., el Mansouri, N. E., Pelach, M. A., Francesc, F., Salvadó, J. (2012). Feasibility of incorporating treated lignins in fiberboards made from agricultural waste. Waste Management, 32(10), 1962–1967. https://doi.org/10.1016/j.wasman.2012.05.019
• Masrol, S. R., Ibrahim, M. H. I., Adnan, S., Abdul Raub, R., Sa’adon, A. M., Sukarno, K. I., Yusoff, M. F. H. (2018). Durian rind soda-anthraquinone pulp and paper: Effects of elemental chlorine-free bleaching and beating. Journal of Tropical Forest Science, 30(1), 106–116. https://doi.org/10.26525/jtfs2018.30.1.106116
• Mckee, R. C. (1971). Effect of repulping on sheet properties and fiber characteristics. Paper Trade J, 155(21), 34–40.
• Minor, J. L. (1994). Hornification -Its origin and meaning. Progress in Paper Recycling, 3(2), 93–95.
• Mohanty, A. K., Misra, M., Drzal, L. T. (2005). Natural fibers, biopolymers, and biocomposites. In Natural Fibers, Biopolymers, and Biocomposites. CRC press. https://doi.org/10.1201/9780203508206.ch1
• Moon, R. J., Martini, A., Nairn, J., Simonsen, J., Youngblood, J. (2011). Cellulose nanomaterials review: Structure, properties and nanocomposites. Chemical Society Reviews, 40(7), 3941–3994. https://doi.org/10.1039/c0cs00108b
• Obradovic, D., Mishra, L. N. (2020). Mechanical properties of recycled paper and cardboard. The Journal of Engineering and Exact Sciences, 6(3), 429–434. https://doi.org/10.18540/jcecvl6iss3pp0429-0434
• Özdemir, A., Çiçekler, M., Tutuş, A. (2020). Investigation of the usability of Cicer arietinum stalks in paper industry. 4th International Mersin Symposium, 230–240.
• Pereira, T., Neves, A. S. L., Silva, F. J. G., Godina, R., Morgado, L., & Pinto, G. F. L. (2020). Production process analysis and improvement of corrugated cardboard industry. Procedia Manufacturing, 51, 1395–1402. https://doi.org/10.1016/j.promfg.2020.10.194
• Przybysz Buzała, K., Kalinowska, H., Borkowski, J., & Przybysz, P. (2018). Effect of xylanases on refining process and kraft pulp properties. Cellulose, 25(2), 1319–1328. https://doi.org/10.1007/s10570-017-1609-y
• Samp, J. C. (2008). A comprehensive mechanism for anthraquinone mass transfer in alkaline pulping. Georgia Institute of Technology.
• Saracbasi, A., Sahin, H. T., Karademir, A. (2016). Effects of sodium borohydride addition to kraft pulping process of some pine species. Journal of Forestry Research, 1(4), 134–143. https://doi.org/10.17568/oad.19661
• Sarwar Jahan, M., Shamsuzzaman, M., Rahman, M. M., Iqbal Moeiz, S. M., Ni, Y. (2012). Effect of pre-extraction on soda-anthraquinone (AQ) pulping of rice straw. Industrial Crops and Products, 37(1), 164–169. https://doi.org/10.1016/j.indcrop.2011.11.035
• Scallan, A. M., Borch, J. (1974). Interpretation of paper reflectance based upon morphology: general applicability. TAPPI, 57(5), 143–147.
• Schönberg, C., Oksanen, T., Suurnäkki, A., Kettunen, H., Buchert, J. (2001). The importance of xylan for the strength properties of spruce kraft pulp fibres. Holzforschung, 55(6), 639–644. https://doi.org/10.1515/HF.2001.104
• Shao, S., Wu, C., Chen, K. (2017). Refining, dewatering, and paper properties of soda-anthraquinone (soda/AQ) pulp from rice straw. BioResources, 12(3), 4867–4880. https://doi.org/10.15376/biores.12.3.4867-4880
• Singh, K. B. (1997). Chickpea (Cicer arietinum L.). Field Crops Research, 53(1–3), 161–170. https://doi.org/10.1016/S0378-4290(97)00029-4
• Tutus, A., Cicekler, M., Kucukbey, N. (2016). Pulp and Paper Production from Bitter Orange (Citrus aurantium L.) Woods with Soda-AQ Method. Kastamonu University Journal of Forestry Faculty, 16(1), 14–18.
• Tutuş, A., Kazaskeroğlu, Y., & Çiçekler, M. (2015). Evaluation of tea wastes in usage pulp and paper production. BioResources, 10(3), 5395–5406. https://doi.org/10.15376/biores.10.3.5395-5406
• van der Maesen, L. J. G. (1987). Origin, history and taxonomy of chickpea. The Chickpea., 1883, 11–34.
• Viets, F. G. (1975). Agricultural waste management: Problems, processes and approaches. Agriculture and Environment, 2(3), 285–286. https://doi.org/10.1016/0304-1131(75)90021-1
• Wan Rosli, W. D., Mazlan, I., Law, K. N. (2009). Effects of kraft pulping variables on pulp and paper properties of acacia mangiumkraft pulp. Cellulose Chemistry and Technology, 43(1–3), 9–15.
• Watson, A. J., & Dadswell, H. E. (2017). Influence of fibre morphology on paper properties: Part 1.—Fibre length. Appita Journal, 70(3), 271–282.
• Yaşar, S., Beram, A., Güler, G., (2017). Phenolic extractives of Kermes Oak (Quercus coccifera L.) wood. The Journal of Graduate School of Natural and Applied Sciences of Mehmet Akif Ersoy University, Special issue (1): 73-78.
• Yin, D., Lin, Y., Chen, Z., Qiao, J., Xiao, M., Wang, D. (2016). Production of corrugating medium paper with secondary fibers from digested deinking sludge. Journal of Industrial and Engineering Chemistry, 37, 168–174. https://doi.org/10.1016/j.jiec.2016.03.026
• Zhang, M., Li, Z., Yang, R. (2017). Preparation of xylanase loaded biomass-based deinking agents and their application in secondary fiber recycling. BioResources, 12(2), 2818–2829. https://doi.org/10.15376/biores.12.2.2818-2829