Time-Dependent Change of Color and Translucency of Recent Restorative Materials in Various Beverages

Year 2023, Volume: 13 Issue: 1, 150 - 158, 28.03.2023

Seda Nur Karakaş , Cihan Küden

https://doi.org/10.33808/clinexphealthsci.1068359

Cited By: 2

Abstract

Objective: The aim of this study was to evaluate the time-dependent changes in optical properties of recent tooth-colored restorative materials in commonly used coloring beverages.
Method: A total of 200 specimens of four different materials (Alkasite, ACTIVA, Equia Forte, Zirconomer) and a composive material as the control group were prepared in Teflon molds and the materials were immersed in four different solutions (coffee, cola, ice tea and saliva) (n=10). Color measurements were performed with a spectrophotometer at baseline, 7, 14 and 28 days. Color changes, translucency parameters (TP) and contrast ratios of the materials were calculated. The data were analyzed by repeated measurements and three-way ANOVA and post hoc Tukey tests.
Results: Alkasite showed the greatest color change for all solutions in all immersion periods compared to other materials (p<0.001). The experimented solutions caused a perceptible color change in all materials after 28 days (p<0.05). Coffee and ice tea caused more staining of resin-based materials for all immersion periods (p<0.05). Initial TP and ∆TP of glass ionomer-based materials were found to be lower than the resin-based materials.
Conclusion: Exposure of the recent materials to different solutions for a certain period of time caused significant changes in optical properties. Resin-based alkasite, ACTIVA and composite showed the highest change the optical properties in coffee and ice tea.

Keywords

Alkasite, color change, composite resin, contrast ratio, translucency

Supporting Institution

Scientific Research Projects of Çukurova University

Project Number

TSA-2020-13339

References

• Ren Y-F, Feng L, Serban D, Malmstrom HS. Effects of common beverage colorants on color stability of dental composite resins: the utility of a thermocycling stain challenge model in vitro. J Dent. 2012;40:48-56.
• Ilie N, Bucuta S, Draenert M. Bulk-fill resin-based composites: an in vitro assessment of their mechanical performance. Oper Dent 2013;38:618-625.
• Tarle Z, Attin, T, Marovic D, Andermatt L, Ristic M, Tauböck TT. Influence of irradiation time on subsurface degree of conversion and microhardness of high-viscosity bulk-fill resin composites. Clin Oral Investig 2015;19:831-840.
• Chau NPT, Pandit S, Cai JN, Lee M-H, Jeon J-G. Relationship between fluoride release rate and an-ti-cariogenic biofilm activity of glass ionomer cements. Dent Mater 2015;31:100-108.
• Hegde NN, Attavar SH, Hegde MN, Priya G. Antibacterial activity of dental restorative material: An in vitro study. J Conserv Dent 2018;21:42-46.
• Amalavathy RK, Sahoo HS, Shivanna S, Lingaraj J, Aravinthan S. Staining effect of various beverages on and surface nano-hardness of a resin coated and a non-coated fluoride releasing tooth-coloured re-storative material: An in-vitro study. Heliyon 2020;6:1-5.
• Karakaş SN, Küden C. Comparative Evaluation of Cavities Disinfected with Ozone Gas and Photodynamic Therapy and Restored with Two Different Reinforced Glass Ionomer Ce-ments on Microleakage and Color Change. Ozone Sci Eng 2021:1-10.
• Bhadra D, Shah NC, Rao AS, Dedania MS, Bajpai N. A 1-year comparative evaluation of clinical perfor-mance of nanohybrid composite with Activa™ bioactive composite in Class II carious lesion: A randomized control study. J Conserv Dent 2019;22:92-96.
• Atri F, Safi M, Salehzadeh S, Izadi J, Fallah PE, McLaren EA. Analysis of color and fluorescence of different dentin ceramics and natural human dentin's to enhance shade matching. J Esthet Dent 2021;33:1029-1034.
• Miletic V, Stasic JN, Komlenic V, Petrovic R. Multifactorial analysis of optical properties, sorption, and solubility of sculptable universal composites for enamel layering upon staining in colored beverages. J Esthet Dent 2021;33:943-952.
• Çakmak G, Donmez MB, Kashkari A, Johnston WM, Yılmaz B. Effect of thickness, cement shade, and coffee thermocycling on the optical properties of zirconia reinforced lithium silicate ceramic. J Esthet Dent 2021;1-7.
• Winter R. Visualizing the natural dentition. J Esthet Dent 1993;5:103-118.
• Uchimura JYT, Sato F, Santana RG, Menezes-Silva R, Bueono LS Borges AFS, Pascotto RC. Translucency parameter of conventional restora-tive glass‐ionomer cements. J Esthet Dent 2021;33:935-942.
• Barutçugil Ç, Bilgili D, Barutcigil K, Dündar A, Büyükkaplan UŞ, Yılmaz B. Discoloration and translucency changes of CAD-CAM materials after exposure to beverages. J Prosthet Dent 2019;122:325-331.
• Nogueira AD, Della Bona A. The effect of a coupling medium on color and translucency of CAD–CAM ceramics. J Dent 2013;41:18-23.
• Salas M, Lucena C, Herrera LJ, Yebra A, Della-Bona A, Perez MN. Translucency thresholds for dental materials. Dent Mater 2018;34:1168-1174.
• Blum IR, Özcan M. Reparative Dentistry: Possibilities and Limitations. Curr Oral Health Rep 2018;5:264-269.
• Villalta P, Lu H, Okte Z, Garcia-Godoy F, Powers JM. Effects of staining and bleaching on color change of dental composite resins. J Prosthet Dent 2006;95:137-142.
• Barutcigil Ç, Barutcigil K, Özarslan MM, Dündar A, Yılmaz B. Color of bulk‐fill composite resin restora-tive materials. J Esthet Dent 2018;30:3-8.
• Erdemir U, Yıldız E, Eren MM. Effects of sports drinks on color stability of nanofilled and microhybrid composites after long-term immersion. J Dent 2012;40:55-63.
• Örtengren U, Andersson F, Elgh U, Terselius B, Karlsson S. Influence of pH and storage time on the sorption and solubility behaviour of three composite resin materials. J Dent 2001;29:35-41.
• Duke E, Trevino D. A resin-modified glass ionomer restorative: three-year clinical results. J Indiana Dent Assoc 1998;77:13-16.
• Abu‐Bakr NE, Han L, Okamoto A, Iwaku M. Color stability of compomer after immersion in various media. J Esthet Dent 2000;12:258-263.
• Johnston WM. Color measurement in dentistry J Dent 2009;37:2-6.
• Colorimetry C, Commission Internationale de l’Èclairage: Vienna. 2004, Austria.
• Luo MR, Cui G, Rigg B. The development of the CIE 2000 colour‐difference formula: CIEDE2000. Color Res Appl 2001;26:340-350.
• Kürklü D, Azer SS, Yilmaz B, Johnston WM. Porcelain thickness and cement shade effects on the colour and translucency of porcelain veneering materials. J Dent 2013;41:1043-1050.
• Watts A, Addy M. Tooth discolouration and staining: a review of the literature. Br Dent J 2001;190:309-316.
• Kim JH, Lee YK, Powers JM. Influence of a series of organic and chemical substances on the translucency of resin composites. J Biomed Mater Res B Appl Biomaters 2006;77:21-27.
• Gómez-Polo C, Muñoz MP, Luengo MC, Vicente P, Galindo P, Casado AMM. Comparison of the CIELab and CIEDE2000 color difference formulas. J Prosthet Dent 2016;115:65-70.
• Paravina RD, Ghin R, Herrera LJ, Bona AD, Igiel C, Lininger M, Mar-Perez MD. Color difference thresholds in dentistry. J Esthet Dent 2015;27:1-9.
• Samanta S, Das UK, Mitra A. Comparison of microleakage in class V cavity restored with flowable composite resin, glass ionomer cement and cention N. Imp J Interdiscip Res 2017;3:180-183.
• Croll TP, Berg JH, Donly KJ. Dental repair material: a resin-modified glass-ionomer bioac-tive ionic resin-based composite. Compend Contin Educ Dent 2015;36:60-5.
• Ertas E, Güler AU, Yücel AC, Köprülü H, Güler E. Color stability of resin composites after immersion in different drinks. Dent Mater J 2006;25:371-376.
• Barutcigil Ç, Yıldız M. Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites. J Dent 2012;40:57-63.
• Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, Feilzer AJ. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010;41:695-702.
• Fontes ST, Fernández MR, Moura CM, Meireles SS. Color stability of a nanofill compo-site: effect of different immersion media. J Appl Oral Sci 2009;17:388-391.
• Janda R, Roulet JF, Kaminsky M, Steffin G, Latta M. Color stability of resin matrix restorative materials as a function of the method of light activation. Eur J Oral Sci 2004;112:280-285.
• Krishnan VK, Yamuna V. Effect of initiator concentration, exposure time and particle size of the filler upon the mechanical properties of a light‐curing radiopaque dental composite. J Oral Rehabil 1998;25:747-751.
• Tekçe N, Tuncer S, Demirci M, Serim ME, Baydemir C. The effect of different drinks on the color stability of different restorative materials after one month. Restor Dent Endod 2015;40:255-261.
• Paravina RD, Ontiveros JC, Powers JM. Curing‐dependent changes in color and translu-cency parameter of composite bleach shades. J Esthet Dent 2002;14:158-166.
• Vichi A, Sedda M, Fabian-Fonzar R, Carrabba M, Ferrari M. Comparison of Contrast Ratio, Translucency Parameter, and Flexural Strength of Traditional and “Augmented Translucency” Zirconia for CEREC CAD/CAM System. J Esthet Dent 2016;28:32-39.
• Lee Y-K. Translucency of human teeth and dental restorative materials and its clinical rele-vance. J Biomed Opt 2015;20:045002.
• Hasegawa A, Ikeda I, Kawaguchi S. Color and translucency of in vivo natural central inci-sors. J Prosthet Dent 2000;83:418-423.
• Yu B, Ahn J-S, Lee Y-K. Measurement of translucency of tooth enamel and dentin. Ac-ta Odontol Scand 2009;67:57-64.
• Yu B, Lee Y-K. Differences in color, translucency and fluorescence between flowable and universal resin composites. J Dent 2008;36:840-846.
• Mount G, Patel C, Makinson O. Resin modified glass‐ionomers: Strength, cure depth and translucency. Aust Dent J 2002;47:339-343.
• Quek SH, Yap AU, Rosa V, Tan KBC, Teoh KHEffect of staining beverages on color and translucency of CAD/CAM composites. J Esthet Dent 2018;30:9-17.
• Stawarczyk B, Liebermann A, Eichberger M, Güth JF. Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites. J Mech Behav Biomed Mater 2016;55:1-11.