SEKiL BELLEKLi ALASIMLAR

Year 2000, Issue: 001, 179 - 192, 15.01.2000

Agah Aygahoğlu

Abstract

Sekil bellekli butun malzemeler deJormasyona ( egme, ktvtrma,

vb) ugrauldiktan sonra tsttma sonucu eski seklini hattrlayarak

deformasyondan onceki haline geri doner. Bunun sebebi sekil bellekli

alastmlartn martenzitik yaptya sahip olmastdtr; Martenzitik durumda

deJormasyona ugratilan sekil bellekli alasim tsuma sonucu yiiksek sicakltk

fazt ostenite donuserek deJormasyondan onceki haline geri doner.

Keywords

Martenzit, Sekil Bellek Etkisi, Termoelastik Martenzit, Elektron - Atom Oranı

References

• Aksoy T., Onel K., 1991, "Malzeme Bilgisi I", Dokuz EylUI Universitesi
• Aygahoglu A., 1996, "Sekil Bellekli Alasirnlar ve Uygulama Alanlan", Dumlupmar Universitesi Yuksek Lisans Tezi.
• Brinson L.C., Lammering R., 1993, "Finite Element Analysis of The Behavior of Shape Memory Alloys and Their Applications" , International Journal of Solids and Structures, v 30 (23), pp. 3261-3280.
• Erhard E., Erhard K., 1993, "Characterization of Shape Memory Alloys by Hardness Indentations", Praktische Metallographie, v. 30 (to), pp, 507- 518.
• Fmdik F., Ogur A., Karadeniz E., Genel K., Ozgirgin M.e., 1995, "Hafizah Malzemeler Ve Uretimi", 6. Denizli Malzeme Sempozyumu.
• Geckinli A.E., 1992, "Martenzitik Donusumler", Faz Donusumleri (Ders Notu), i.T.O. Kimya- Metalurji Fakultesi, Sf. 54 -59.
• Gil F.J., Guilemany J.M.,1992, "The Determination of The Electron to Atom Ratio Interval Corresponding to The Change in The Martensitic Structure From ct' to ~' in Cu-Zn-AI Shape Memory Alloys", Materials Research Bulletin, v. 27 (I), pp. 117-122.
• Gil F.J., Guilemany J.M. , 1993, "Influence of The Electron-to-Atom Ratio on The Martensitic Transformation Enthalpy and Entropy Values in Cu- Zn-AI Shape Memory Alloys" , Journal of Alloys and Compounds, v. J 94 (1), pp. L9-LJO.
• GUle'Y$., Aran A., Ceviri (Bergel H.J., Schulze G.), 1993, "Malzeme Bilgisi", Cilt I, i.T.O. Makina Fakultesi.
• Hansen J., 1988, "Shape Memory Alloys", Material Science (Cev, GorgUIU F., "Hatirlayan Metaller" Bilim Teknik Dergisi)
• Kenneth M., Thomas H., 1976, "An Introduction to Materials Science And Engineering", pp. 361-364.
• Leo P.H., Shield T.W., Bruno O.P., 1993, "Transient Heat Transfer Effects on The Pseudoelastic Behavior of Shape Memory Wires", Acta Metallurgica et Materialia, v. 41 (8), pp. 2477-2485.
• Noyan E., 1990, "Shape Memory Alloy Design", Doctor of Philosophy Thesis, Middle East Technical University.
• Selimbeyoglu E., 1992, "Design of Shape Memory Alloys Actuators", Doctor of Philosophy Thesis, Middle East Technical University.
• Tadaki T., Otsuka K., Shimizu K., 1988, "Shape Memory Alloys", Material Science, v 18, pp 25-45.
• Zeren A., Zeren M., 1991, "Bicim Bellekli Malzemeler", Uludag Oniversitesi Ballkesir Muhendislik Fakultesi, II. Balikesir Muhendislik Sempozyumu.