The Importance of Waste and Environment Management in Printing Industry

Year 2019, Volume: 3 Issue: 2, 18 - 26, 10.10.2019

Pelin Hayta , Mehmet Oktav

Abstract

All kinds of materials that become useless during
production activities, damage the environment and must be exterminated are
generally called waste. Waste is also defined as all materials thrown away by
its manufacturer or a person or entity who owns it and causes a harmful change
at environment.

The most important of the solid, liquid and gaseous
wastes produced in the printing industry before, during and after the printing
process are waste ink, ink sludge and solvents emerging after machine washing,
wastewater of water-based ink, plate and film developer and fixer solutions, waste
papers, waste films, faulty prints, cleaning solvents and volatile organic
compound (VOC) emissions emerging from IPA use. Some of these wastes fall into
the hazardous waste category due to their processing characteristics during the
production process. Effective and regular extermination of these wastes is
necessary to protect the environment and employee health. This can be provided
only by the application of waste management. Some wastes are recycled and
reused at printing industry, but in some cases that recycling is impossible,
these wastes should be eliminated without harming human health and environment.
Especially the materials whose disposal is compulsory should be classified at
the source and sent to licensed disposal companies.

As a new sector, waste management industry should
develop new and special processes for printing technologies wastes. Owners of
printing companies should be informed about waste management. At waste
management process, the most appropriate clean production techniques should be
used, waste production should be prevented or minimized and wastes should be
recycled effectively.

The aim of this study is to provide suggestions and
contributions for the possible best ways of preventing the wastes from harming
the nature and disposing or recycling of the wastes generated during production
in the printing industry.

Keywords

Waste Management, Printing Wastes

References

• REFERENCES [1]. Hürriyet newspaper, 31.07.2017.
• [2]. Appiah, I. K., Printing techniques, Kumasi, Ghana: Kwame Nkrumah, University of Science & Technology Publishing, 2002.
• [3]. Causes and Sources of Waste in the Printing Industry in Ghana: A Study of Printing Houses in the Cities of Accra and Kumasi International Business Research July, Vol.1 No. 3, 2008
• [4]. Romano, F., An investigation into printing industry trends (PICRM-2004-01). Rochester, NY: Rochester Institute of Technology, Printing Industry Center, 2004.
• [5]. Appiah, I. K., Printing techniques. Kumasi, Ghana: Kwame Nkrumah, University of Science & Technology Publishing, 2002.
• [6]. Environmental, Health, and Safety Guidelines for Printing , International Finance Corporation, April 30, 2007.
• [7]. Journal of Cleaner Production, Management strategy for hazardous waste from atomised SME: Application to the printing industry L. Cristóbal Andrade, C. Gómez Míguez, M.C. Taboada Gómez, P.M. Bello Bugallo *Dept. of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782 Santiago de Compostela, Spain.
• [8]. Matbaacının mürekkep hakkında bilmesi gerekenler, Dr. Nelson R. Eldred, s. 64, 178, 312 – 315, 2012.
• [9]. S&P Dow Jones Indices ESG Analysis (https://www.trucost.com/)
• [10]. Matbaa Haber, Sürdürülebilirlik başarı getiren yeşil ışık, Catherine Carter, 8 March 2012, http://www.matbaahaber.com/tr/magazine/103/5579
• [11]. A. Katariya, Presentation on future of water based inks, page 7, 2012.
• [12]. Atık, Çeşitleri, Atık Yönetimi, Geri Dönüşüm ve Tüketici: Çankaya Belediyesi ve Semt Tüketicileri Örneği A. Anıl GÜNDÜZALP, Seval GÜVEN
• [13]. A.YILMAZ, Y. BOZKURT, Türkiye'de kentsel katı atık yönetimi uygulamaları ve kütahya katı atık birliği (KÜKAB) örneği, Suleyman Demirel University, The Journal of Faculty of Economics and Administrative Sciences, Vol.15, No.1 pp.11-28, Y.2010
• [14]. A. YAKUT, Geri dönüştürülebilir kullanılmış Kağıttan Yeni Kağıt Üretiminin İrdelenmesi, Tesisat Mühendisliği , Sayı 127, s. 70-73, Ocak/Şubat 2012. [15]. The State of the Paper Industry, Monitoring the Indicators of Environmental Performance, A collaborative report by the Steering Committee of the Environmental Paper Network, s. 15, 2007.
• [16]. B. Çevik, Kağıt ve ürünleri sektörü, İktisadi araştırmalar bölümü, Türkiye İş Bankası Raporu, s. 7-8, Mayıs 2016.
• [17]. The State of the Paper Industry, Monitoring the Indicators of Environmental Performance, A collaborative report by the Steering Committee of the Environmental Paper Network, s. 15, 2007.
• [18]. International Finance Corporation (IFC) (2007) Environmental, Health, and Safety Guidelines for Printing. pp. 1-18, (http://www.ifc.org/wps/wcm/connect/Topics_Ext_Content/IFC_External_Corporate_Site/IFC+Sustainability/Sustainability+Framework/Environmental,+Health,+and+Safety+Guidelines/. Accessed 10.10.2016.)
• [19]. European Union, 21.04.2004, Retrieved on 28.09.2010.
• [20]. CANADIAN PRINTING INK MANUFACTURERS ASSOCIATION WHAT ARE VOCs? VOC December 2010 Page 1 of 2
• [21]. 1.H. Gecol, J.F. Scamehorn, S.D. Christian, B.P. Grady, F. Riddell, Use of surfactantsto remove waterbased inks from plastic films, Colloids Surf.A: Physicochem.Eng. Aspects 189 (2001) 55–64. VOC emissions to air constitute approximately 98 to 99 percent of all toxic releases in the printing industry
• [22]. Environmental, Health, and Safety Guidelines for Printing, International Finance Corporation and World Bank Group, APRIL 30, 2007.
• [23]. Çevre Online, Atık Yönetimi, (http://cevreonline.com/atik-yonetimi/ 10.09.2017)