The effects of different repolishing procedures on the color change of bulk-fill resin composites

Year 2024, Volume: 58 Issue: 1, 14 - 21, 30.01.2024

Muhammet Fidan

https://doi.org/10.26650/eor.20231234627

Abstract

Purpose: The purpose of the study was to investigate the impact of repolishing procedures on the color change of bulk-fill resin composites after being exposed to coffee.
Materials and methods: Four bulk-fill resin composites (Filtek One bulk‑fill, Tetric EvoCeram bulk-fill, Admira Fusion x-tra bulk-fill, Grandio SO x-tra bulk-fill) were tested. Sixty samples were prepared with each resin composite and were randomly divided into two groups: first one received the one-step polishing system (Optragloss) and the other group received the two-step polishing system (Nova Twist) (n=30). After being kept in coffee for 12 days, the samples were divided into three subgroups according to repolishing: one-step repolishing group, two-step repolishing group, and non-repolishing group (n=10 for each). Color measurements of the resin composite samples were determined with a spectrophotometer. The difference in color change was calculated using the CIEDE 2000 color formula. The data were analyzed using three-way ANOVA and Tukey test.
Results: Among composite materials, Filtek One bulk-fill (1.84 ± 0.98) less color change was observed compared to others (p<0.001). In terms of polishing systems, Optragloss (2.96 ± 1.51) showed significantly greater color change than Nova Twist (2.21 ± 1.07) (p<0.001). The non-repolishing group (3.78 ± 1.25) presented significantly greater color change than the Nova Twist sytem (1.49 ± 0.61) and Optragloss system (2.50 ± 1.01) (p<0.001).
Conclusion: The repolishing process reduced discoloration. A two-step repolishing system results in less color change compared to a one-step repolishing application. In polishing systems containing diamond particles, increasing the number of steps can contribute to color stability.

Keywords

bulk-fill, color stability, discoloration, repolishing, resin composite

Supporting Institution

-

Thanks

The author thank to VOCO GmbH, for supplying the resin materials used in this study.

References

• Turkyılmaz G, Tuncer T, Bal F. Effect of different finishing and polishing systems on surface roughness of bulk fill composite resin. Turkiye Klinikleri J Dental Sci 2021;27:280-5. google scholar
• Jung JH, Park SH. Comparison of polymerization shrinkage, physical properties, and marginal adaptation of flowable and restorative bulk fill resin-based composites. Oper Dent 2017;42:375-86. google scholar
• Aydin N, Karaoglanoglu S, Oktay EA, Ersoz B. Effect of additional polishing application on the surface roughness and color change of composite resins. Turkiye Klinikleri J Dental Sci 2021;27:462-9. google scholar
• Karakas SN, Küden C. Effect of different repolishing procedures on the color change of alkasite. Cumhur Dent J 2022; 25 Suppl:37-41. google scholar
• Aydın N, Karaoğlanoğlu S, Oktay EA, Kılıçarslan MA. Investigating the color changes on resin-based CAD/CAM Blocks. J Esthet Restor Dent 2020;32:251-6. google scholar
• Yazdi HK, Nasoohi N, Benvidi M. In vitro efficacy of listerine whitening mouthwash for color recovery of two discolored composite resins. Front Dent 2019;16:181-6. google scholar
• Fidan M, Dereli Z. Effect of polishing systems on the color and surface properties of resin composites in the process of accelerated artificial aging. Clin Exp Health Sci 2022;12:702-10. google scholar
• St-Pierre L, Martel C, Crepeau H, Vargas MA. Influence of polishing systems on This article has been accepted for publication and undergone full peer review but has not been through the copyediting, typesetting, pagination and proofreading process, which may lead to differences between this version and the Version of Record surface roughness of composite resins: Polishability of composite resins. Oper Dent 2019 ;44:E122-32. google scholar
• Güler E, Yücel A, Gönülol N, Yılmaz F, Ersöz E. The comparison of color stability of composite resins after immersion in different drinks. J Dent Fac Atatürk Uni 2013;21:24-9. google scholar
• Pecho OE, Martos J, Pinto KVA, Pinto KVA, Baldissera RA. Effect of hydrogen peroxide on color and whiteness of resin-based composites. J Esthet Restor Dent 2019;31:132-9. google scholar
• Perez Mdel M, Ghinea R, Herrera LJ, Ionescu AM, Pomares H, Pulgar R, Paravina RD. Dental ceramics: a CIEDE2000 acceptability thresholds for lightness, chroma and hue differences. J Dent 2011;39 Suppl 3:e37-44. google scholar
• Lopes GC, Vieira LC, Araujo E. Direct composite resin restorations: a review of some clinical procedures to achieve predictable results in posterior teeth. J Esthet Restor Dent. 2004;16:19-31. google scholar
• Barakah HM, Taher NM. Effect of polishing systems on stain susceptibility and surface roughness of nanocomposite resin material. J Prosthet Dent 2014;112:625-31. google scholar
• Mutlu SN, Tuncdemir MT. Effect of whitening mouthrinses on surface roughness of composite resin. Selcuk Dent J 2020;7:435-9. google scholar
• Malekipour MR, Sharafi A, Kazemi S, Khazaei S, Shirani F. Comparison of color stability of a composite resin in different color media. Dent Res J (Isfahan) 2012;9:441-6. google scholar
• Zajkani E, Abdoh Tabrizi M, Ghasemi A, Torabzade H, Kharazifard M. Effect of staining solutions and repolishing on composite resin color change. J Islam Dent Assoc Iran 2013;25:139-46. google scholar
• Poggio C. Color stability of new esthetic restorative materials: A spectrophotometric analysis. J Funct Biomater 2017;8:26. google scholar
• Aminoroaya A, Neisiany RE, Khorasani SN, Panahi P, Das O, Madry H, et al. A review of dental composites: Challenges, chemistry aspects, filler influences, and future insights. Compos Part B Eng 2021;216:108852. google scholar
• Backes CN, FranÇa FMG, Turssi CP, Amaral FLBD, Basting RT. Color stability of a bulk-fill composite resin light-cured at different distances. Braz Oral Res 2020 30;34:e119. google scholar
• Bolanos-Carmona V, Benavides-Reyes C, Gonzâlez-Lopez S, Gonzâlez-Rodriguez P, Âlvarez-Lloret P. Influence of spectroscopic techniques on the estimation of the degree of conversion of bulk-fill composites. Oper Dent 2020;45:92-103. google scholar
• Gonder HY, Fidan M. Effect of different polymerization times on color change, translucency parameter, and surface hardness of bulk-fill resin composites. Niger J Clin Pract. 2022;25:1751-1757. google scholar
• Abo-Eldahab G, Kamel M. Color stability of nanofilled and suprananofilled resin composites with different polishing techniques after ımmersion in coffee solution. Egypt Dent J 2023;69:827-836. google scholar
• Szczesio-Wlodarczyk A, Domarecka M, Kopacz K, Sokolowski J, Bociong K. An Evaluation of the Properties of Urethane Dimethacrylate-Based Dental Resins. Materials (Basel) 2021;14:2727. google scholar
• Klauer E, Belli R, Petschelt A, Lohbauer U. Mechanical and hydrolytic degradation of an Ormocer®-based Bis-GMA-free resin composite. Clin Oral Investig 2019;23:2113-2121. google scholar
• Torres CRG, Augusto MG, Mathias-Santamaria IF, Di Nicolo R, Borges AB. Pure ormocer vs methacrylate composites on posterior teeth: A double-blinded randomized clinical trial. Oper Dent 2020;45:359-67. google scholar
• Ebaya MM, Ali AI, El-Haliem HA, Mahmoud SH. Color stability and surface roughness of ormocer- versus methacrylate-based single shade composite in anterior restoration. BMC Oral Health 2022;22:1-12. google scholar
• Nasim I, Neelakantan P, Sujeer R, Subbarao CV. Color stability of microfilled, microhybrid and nanocomposite resins--an in vitro study. J Dent 2010;38 Suppl 2:e137-42. google scholar
• Tagtekin DA, Yanikoglu FC, Bozkurt FO, Kologlu B, Sur H. Selected characteristics of an Ormocer and a conventional hybrid resin composite. Dent Mater 2004;20:487-97. google scholar
• Sirin Karaarslan E, Bulbul M, Yildiz E, Secilmis A, Sari F, Usumez A. Effects of different polishing methods on color stability of resin composites after accelerated aging. Dent Mater J 2013;32:58-67. google scholar
• Cristina D, Dantas B, Mathias IF, Borges AB, Rocha C, Torres G, et al. Effects of artificial accelerated aging on the optical properties of resin composites. Biosci J 2018;34:1105-13. google scholar
• Luiz BKM, Amboni RDMC, Prates LHM, Roberto Bertolino J, Pires ATN. Influence of drinks on resin composite: Evaluation of degree of cure and color change parameters. Polym Test 2007;26:438-44. google scholar
• Misilli T, Gonulol N. Water sorption and solubility of bulk-fill composites polymerized with a third generation LED LCU. Braz Oral Res 2017;31:1-8. google scholar
• Emami N, Sjödahl M, Söderholm KJM. How filler properties, filler fraction, sample thickness and light source affect light attenuation in particulate filled resin composites. Dent Mater 2005;21:721-30. google scholar
• Lopes-Rocha L, Mendes JM, Garcez J, Sâ AG, Pinho T, Souza JCM, Torres O. The effect of different dietary and therapeutic solutions on the color stability of resin-matrix composites used in dentistry: An in vitro study. Materials (Basel) 2021;14:6267. google scholar
• Carrillo-Marcos A, Salazar-Correa G, Castro-Ramirez L, Ladera-Castaneda M, Lopez-Gurreonero C, Cachay-Criado H, et al. The microhardness and surface roughness assessment of bulk-fill resin composites treated with and without the application of an oxygen-ınhibited layer and a polishing system: An in vitro study. Polymers (Basel) 2022;28;14:3053. google scholar
• Babina K, Polyakova M, Sokhova I, Doroshina V, Arakelyan M, Novozhilova N. The effect of finishing and polishing sequences on the surface roughness of three different nanocomposites and composite/enamel and composite/cementum interfaces. Nanomaterials (Basel) 2020;10:1339. google scholar
• Madhyastha PS, Hegde S, Srikant N, Kotian R, Iyer SS. Effect of finishing/polishing techniques and time on surface roughness of esthetic restorative materials. Dent Res J (Isfahan) 2017;14:326. google scholar
• Aytac F, Karaarslan ES, Agaccioglu M, Tastan E, Buldur M, Kuyucu E. Effects of novel finishing and polishing systems on surface roughness and morphology of nanocomposites. J Esthet Restor Dent 2016;28:247-61. google scholar Schmitt VL, Nahsan FPS, Naufel FS, Vaez SC, de Andrade GS, Baseggio W, et al. Polishing techniques effect on microhybrid, nanohybrid and nanofilled composites color and surface roughness stability. Biosci J 2016;32:262-71. google scholar
• De Carvalho Justo Fernandes ACB, de Assunçao IV, Borges BCD, Alves da Costa G de F. Impact of additional polishing on the roughness and surface morphology of dental composite resins. Rev Port Estomatol Med Dentaria e Cir Maxilofac 2016;57:74-81. google scholar
• Ghinea R, Perez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J Dent 2010;38 Suppl 2:e57-64. google scholar
• Taşın S, Celik G, İsmatullaev A, Usumez A. The effect of artificial accelerated aging on the color stability, microhardness, and surface roughness of different dental laminate veneer materials. J Esthet Restor Dent 2022;34:405-411. google scholar
• Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, et al. Color difference thresholds in dentistry. J Esthet Restor Dent 2015;27 Suppl 1:S1-9. google scholar
• Kaya E, Yildirim S. The effects of pediatric dentifrices with different types of fluoride on the color change of restorative materials How to cite: Kaya E, Yildirim S. The effects of pediatric dentifrices with different types of fluoride on the color change of restorative materials. Eur Oral Res 2022;56:42-8. google scholar
• Erturk-Avunduk AT, Cengiz-Yanardag E, Karakaya I. The effect of bleaching applications on stained bulk-fill resin composites. BMC Oral Health 2022;22:1-13. google scholar
• Jefferies SR. Abrasive finishing and polishing in restorative dentistry: A state-of-the-art review. Dent Clin North Am 2007;51:379-97. google scholar
• Rodrigues SA, Chemin P, Piaia PP, Ferracane JL. Surface roughness and gloss of actual composites as polished with different polishing systems. Oper Dent 2015;40:418-29. google scholar
• Heintze SD, Reinhardt M, Müller F, Peschke A. Press-on force during polishing of resin composite restorations. Dent Mater 2019;35:937-44. google scholar
• Da Costa J, Ferracane J, Paravina RD, Mazur RF, Roeder L. The effect of different polishing systems on surface roughness and gloss of various resin composites. J Esthet Restor Dent 2007;19:214-24. google scholar