Yanal Yüklere Maruz Kalan Kolonların SAP2000 ile Monotonik ve Histeretik Analizi

Year 2020, Volume: 36 Issue: 3, 350 - 363, 31.12.2020

Sila Avğın , Metin Kose

Abstract

Birçok ülkede betonarme binaların çoğunluğu güncel sismik kodlara göre tasarlanmamıştır. Bu binalar genellikle güçlü zemin hareketleri sırasında hasara ve çökmeye karşı hassastır. Tipik olarak, bu tür binalardaki kolonlar yetersiz ve geniş aralıklı enine donatıya sahip olup gerekli sismik donatı detaylarından yoksundur. Bu binaların deprem hasarı değerlendirilirken gözlemlenen davranışın mukavemet ve deformasyon kapasitesi açısından değerlendirilmesini gerektirmektedir. Bir kolondaki yanal deformasyonlar eğilme, donatı sıyrılması ve kesme deformasyonları olmak üzere üç bölümden oluşmaktadır. Bu deformasyonların her biri için SAP2000 programıyla monotonik ve histeretik tepkileri ayrı modellenmiştir. Öncelikle kolon monotonik modeldeki eğilme, donatı sıyrılması ve kesme deformasyonları için plastik mafsal modeli ile, daha sonra histeretik modelde ise monotonik modelden elde edilen sonuçlar SAP2000 histeretik pivot modelinde kullanılarak modellenmiştir. SAP2000 modellerinden elde edilen sonuçlar, deneysel verilerle karşılaştırıldığında, kullanılan modellerin, betonarme kolonların yanal yüklere tepkisini tahmin etmede iyi bir performans sergilediği gösterilmiştir. Bu sonuçlara göre, daha komplex analiz metodları ile çözülen monotonik ve histeretik kolon yanal deformasyon modellerinin SAP2000 programıyla daha basit halde çözülebildiği gösterilmiştir.

Keywords

Zayıf kolon, Eğilme deformasyonu, Kesme deformasyonu, Donatı sıyrılması, SAP2000

References

• [1] Sezen, H., 2002. “Seismic Behavior and Modeling of Reinforced Concrete Building Columns,” Ph.D. Dissertation. University of California, Berkeley, 2002. 324 pp.
• [2] Sezen, H. and Moehle, J. P., 2004. “Shear Strength Model for Lightly Reinforced Concrete Columns,” Journal of Structural Engineering. ASCE, V. 130, No. 11, Nov. 2004. pp. 1692-1703.
• [3] Lodhi, M.S. and Sezen, H., 2012. “Estimation of Monotonic Behavior of Reinforced Concrete Columns Considering Shear-Flexure-Axial Load Interaction,” Earthquake Engineering and Structural Dynamics J., Vol. 41, No. 15, pp. 2159–2175.
• [4] Otani, S. and Sozen, M. A., 1972. “Behavior of Multistory Reinforced Concrete Frames during Earthquakes,” Structural Research Series No. 392. University of Illinois, Urbana, 1972. 551 pp.
• [5] Eligehausen, R., Popov, E. P., and Bertero, V. V., 1983. “Local Bond Stress-Slip Relationship of a Deformed Bar Under Generalized Excitations,” Report No. UCB/EERC 83/23. Earthquake Engineering Research Center, University of California, Berkeley, Oct. 1983. 169 pp
• [6] Morita, S. and Kaku, T., 1984. “Slippage of Reinforcement in Beam-Column Joint of Reinforced Concrete Frame,” Proceedings of the Eighth World Conference on Earthquake Engineering. San Francisco, July 1984. pp. 477-484.
• [7] Alsiwat, J. M. and Saatcioglu, M., 1992. “Reinforcement Anchorage Slip under Monotonic Loading,” Journal of Structural Engineering. ASCE, V. 118, No. 9, Sept. 1992. pp. 2421-2438.
• [8] Caltrans (2002), Caltrans Seismic Design Criteria, Version 1.3, California Department of Transportation, Sacramento, CA.
• [9] FEMA 356, 2000. Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington DC, Nov. 2000
• [10] Vecchio, F. J. and Collins, M. P., 1986. “The Modified Compression-Field Theory for Reinforced Concrete Elements Subjected to Shear,” ACI Journal. V. 83, No. 2, Mar. 1986. pp. 219-231.
• [11] Clough, R. W., (1966). “Effect of Stiffness Degradation on Earthquake Ductility Requirements,” Report 66 Structural and Materials Research, Structural Engineering Laboratory, University of California, Berkeley.
• [12] Fukuda Y., “Study on the Restoring Force Characteristics of Reinforced Concrete Buildings (in Japanese).” Proceedings, Kanto Branch Symposium, Architectural Institute of Japan, No.40 1969 pp 121-124
• [13] Imbeault FA, Nielsen NN. Effect of degrading stiffness on the response of multistory frames subjected to earthquakes. In: Proceedings, fifth world conference on earthquake engineering; 1973. p. 1756-65.
• [14] Takeda, T., Sozen, M. A., and Neilsen, N. N. 1970. “Reinforced concrete response to simulated earthquakes.” Journal of the Structural Division. ASCE, V. 96, No. 12, Dec. 1970. pp. 2557-2573
• [15] Otani S. (1974) Inelastic analysis of R/C frame structures. ASCE J Struct Div 100(7): 1433–1449
• [16] Soleimani D., Popov EP.,Bertero VV. (1979) Nonlinear beam model for R/C frame analysis. In: Proceedings of 7th conference on electronic computation, St. Louis
• [17] Banon, H., Biggs, J. M., and Irvine, H. M., 1981. “Seismic Damage in Reinforced Concrete Frames,” Journal of the Structural Division. ASCE, V. 107, No. 9, Sep. 1981. pp. 1713-1729
• [18] Takayanagi, T. and Schnobricch, W. C., 1976. “Computed Behavior of Reinforced Concrete Coupled Shear Walls,” Structural Research Series no. 434. Civil Engineering Studies, University of Illinois, Urbana, 1976
• [19] SAP2000. Integrated finite element analysis and design of structures, Computers and Structures Inc., Berkeley, California, USA.
• [20] Chowdary T. 2007. Hysteretic Modeling of Shear-Critical Reinforced Concrete Columns Master’s Thesis The Ohio State University 217 pp.
• [21] Mander, J. B., Priestley, J. N., and Park, R., 1988. “Theoretical Stress-Strain Model for Confined Concrete,” Journal of Structural Engineering. ASCE, V. 114, No. 8, Aug. 1988. pp. 1804-1825.
• [22] Sezen, H., and Setzler, E. J. (2008). “Reinforcement slip in reinforced concrete columns.” ACI Struct. J., 105(3), 280–289.
• [23] Moehle, J. P., 1992. “Displacement-Based Design of RC Structures Subjected to Earthquakes,” Earthquake Spectra. EERI, V. 8, No. 3, Aug. 1992. pp. 403-428.
• [24] Setzler, E.J. Modeling the Behavior of Lightly Reinforced Concrete Columns Subjected to Lateral Loads. M.S. Thesis. The Ohio State University, Columbus, Ohio, 2005.
• [25] Patwardhan, C., 2005. “Strength and Deformation Modeling of Reinforced Concrete Columns,” M.S. Thesis. The Ohio State University, Columbus, Ohio, 2005. 166 pp.
• [26] Gerin, M. and Adebar, P., 2004. “Accounting for Shear in Seismic Analysis of Concrete Structures,” Proceedings of the 13th World Conference on Earthquake Engineering. Vancouver, B.C., Canada, Aug. 2004. Paper No. 1747.
• [27] Elwood K.J., and Moehle J.P., “Evaluation of Existing Reinforced Concrete Columns,” 13th World Conference on Earthquake Engineering, Aug, 2004, Paper No. 579
• [28] Pivot hysteretic Model. http://docs.csiamerica.com/helpfiles/csibridge/Advanced_tab/ Assign/Pivot_Hysteresis_Model.html
• [29] ATC-24 (1992) Guidelines for Cyclic Seismic Testing of Components of Steel Structures. Applied Technology Council, California, A.B.D.