POLİAMİD 6 POLİMERİ İLE POLİAMİD 6/VAKS KARIŞIMININ KENDİ ÜZERLERİNDE ÇALIŞMASI DURUMUNDAKİ TRİBOLOJİK DAVRANIŞLARININ İNCELENMESİ

Year 2016, Volume: 31 Issue: 2, 0 - 0, 20.06.2016

Salih Hakan Yetgin , Hüseyin Ünal

https://doi.org/10.17341/gummfd.27962

Cited By: 1

Abstract

Bu çalışmada, katkısız poliamid 6 (PA 6) termoplastik polimeri ile katı yağlayıcı vaks katkılı poliamid 6 karışımının, kuru kayma şartları altında kendi üzerlerindeki tribolojik performansları incelenmiştir. Katı yağlayıcı vaks/poliamid 6 polimer karışımı ikiz vidalı endüstriyel amaçlı bir ekstruderde üretilmiş, test numuneleri ise enjeksiyon makinesi kullanılarak kalıplanmıştır. Tribolojik testler, ASTM G99 standardına uygun olarak yapılmıştır. Aşınma ve sürtünme testleri, pim-disk aşınma cihazında gerçekleştirilmiş olup 10N, 20N, 30N, 50N, 75N, 100N, 200N ve 250N yüklerde ve 0,5 m/s kayma hızında gerçekleştirilmiştir. Tribolojik test sonuçlarına göre, katı yağlayıcı vaks karıştırılmış poliamid 6 polimerinin kendi üzerinde çalışması durumunda sürtünme katsayısı ve aşınma oranı özelliklerinin katkısız poliamid 6’ya göre daha iyi olduğu tespit edilmiştir. Katkısız poliamid 6 ve katı yağlayıcı vaks katkılı poliamid 6 karışımının aşınma yüzey mikro-yapıları incelemek için optik mikroskop kullanılmıştır.

Keywords

Aşınma, Sürtünme; Vaks; PA6

References

• Ünal, H., Mimaroglu, A., "Friction and wear performance of polyamide 6 and graphite and wax polyamide 6 composites under dry sliding conditions", Wear 289, 132–137, 2012.
• Chang, L., Zhang, Z., Zhang, H. ve Schlarb, A.K., "On the sliding wear of nanoparticle filled polyamide 66 composites", Composites Science and Technology 66, 3188–3198, 2006.
• Shivamurthy, B., Udaya Bhat, K. ve Anandhan, S., "Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites", Materials and Design 44, 136–143, 2013.
• Gai, Z., Irina, H., Maksim, A., Qihua, W., Tingmei, W. ve Der-Liang, Y., "Effect of temperature on sliding and erosive wear of fiber reinforced polyimide hybrids", Tribology International 82, 525-533.
• Cho, M.H., Bahadur, S. ve Pogosian, A.K., "Friction and wear studies using Taguchi method on polyphenylene sulfide filled with a complex mixture of MoS2, Al2O3, and other compounds", Wear 258, 1825–1835, 2005.
• Franke, R., Haase, I., Lehmann, D., Hupfer, B. ve Janke, A., "Manufacturing and tribological properties of sandwich materials with chemically bonded PTFE-PA 66 and PA 66/GF", Wear 262, 958–971, 2007.
• Krawıec, S.T., "The influence of polymer fillers in a grease lubricant on the tribological performance of friction nodes operating under mixed friction conditions", Archıves of Civil and Mechanical Engineering 7-4, 121-128, 2007.
• Anne, B., Sherry, G., Rob, J. ve Chris, E., "Wear and friction of aramid fiber and polytetrafluoroethylene filled composites", Wear 203-204, 697–702, 1997.
• Yetgin, S. H., Unal, H., Mimaroglu, A. ve Findik, F., "Influence of Process Parameters on the Mechanical and Foaming Properties of PP Polymer and PP/TALC/EPDM", Composites Polymer-Plastics Technology and Engineering 52: 433–439, 2013.
• Bahadur, S., "The development of transfer layers and their role in polymer tribology", Wear 245, 92–99, 2000.
• Bahadur, S. ve Polineni, V.K., "Tribological studies of glass fabricreinforced polyamide composites filled with CuO and PTFE", Wear 200, 95–104, 2000.
• Cenna, A.A., Dastoor, P., Beehag, A. ve Page, N.W., "Effects of graphite particle addition upon the abrasive wear of polymer surfaces", Journal of Materials Science 36, 891–900, 2001.
• Kukureka, S.N., Chen, Y.K., Hooke, C.J. ve Liao, P., "The wear mechanisms of acetal in unlubricated rolling-sliding contact", Wear 185, 1–8, 1995.
• Ünal, H., Mimaroglu, A., Kadıoglu, U. ve Ekiz, H., "Sliding friction and wear behaviour of polytetrafluoroethylene and its composites under dry conditions", Materials and Design 25 (3), 239–245, 2004.
• Valeria, P., Maria, J. C., David, F., Joseph, K.K. ve Patricia, M. F., "Changes in tribological performance of high molecular weight high density polyethylene induced by the addition of molybdenum disulphide particles, Wear 269, 31–45, 2010.
• Yi-Lan, Y., Du-Xin, L., Gao-Jie, Si. ve Xin, D., "Investigation of the influence of solid lubricants on thetribological properties of polyamide 6 nanocomposite", Wear 311, 57–64, 2014.
• Bolvari, A., Glenn, S., Janssen, R. ve Ellis, C., "Wear and friction of aramide fiber and polytetrafluoroethylene filled composites", Wear 203–204, 697–702, 1997.
• Palabıyık, M. ve Bahadur, S., "Mechanical and tribilogical properties of polyamide 6 and high density polyethylene polyblends with and without compatibilizer", Wear 246, 149–158, 2000.
• Jayashree, B., John, J. R., Jeyakumar , A., Ghosh, A. ve Tewari, U.S., "Influence of solid lubricants and fibre reinforcement on wear behaviour of polyethersulphone", Tribology International 33, 697–706, 2000.
• Kang, S.C. ve Chung, D.W., "The synthesis and frictional properties of lubricant-impregnated cast nylons, Wear 239, 244–250, 2000.
• Wang, J., Gu, M., Songhao, B. ve Ge, S., "Investigation of the influence of MoS2 filler on the tribological properties of carbon fiber reinforced nylon 1010 composites, Wear 255, 774–779, 2003.
• Zhang, X.R., Pei, X.Q. ve Qi-Hua, W., "Friction and wear studies of polyimide composites filled with short carbon fibers and graphite and micro SiO2", Materials and Design 30, 4414–4420, 2009.
• Du-Xin, L, Yi-Lan, Y., Xin, D., Wen-Juan, L. ve Ying, X., "Tribological properties of solid lubricants filled glass fiber reinforced polyamide 6 composites, Materials and Design 46, 809–815, 2013.