Industrial Digitalization with Four Dimensional (4D) Printing - Novel Technology: Brief Review on Developments, Challenges and Applications

Year 2022, , 682 - 693, 01.06.2022

Reddy Sreenıvasulu

https://doi.org/10.35378/gujs.906652

Abstract

The latest advances in additive manufacturing methods (AMM) generally called as three- dimensional (3D) printing permitted to design and generate complicated profiles which are not possible with regular fabrication methods. A branch of new fabrication technique initiated from three dimensional (3D) printing further it is called as four dimensional (4D) printing with self healing materials that can react to outer stimuli by subjecting external pressure on it. Also, day to day advancements in fashion in the lifestyle of public, industries are not capable to satisfy their requirements with conventional manufacturing techniques with conventional materials because of increased cost to alter the design, manufacture and process layout for each fashion style. It is impossible to satisfy with conventional materials as well as processing methods, so more competition existed in the present industrial sectors according to market demands as per customer requirements. Advancements in additive manufacturing techniques covered this gap by day-to-day developments in materials and their methods, provide a variety of designs and fabricate them with a short time by sustaining less investment. In this article, recent developments of smart materials discussed and innovations in 4D printing and challenges which are faced in the research and development divisions also described about a variety of application areas almost in all fields. This paper provides basic information data to the young researchers who are interested to do their work in this area and also discussed with the latest available data pertaining to 4D printing globally.

Keywords

4D printing, Smart materials, Additive Manufacturing, Applications

References

• [1] Tang, Y., Dai, B., Su, B. and Shi, Y., “Recent Advances of 4D Printing Technologies Toward Soft Tactile Sensors”, Frontiers in Materials, 8: 1-10, (2021).
• [2] Chua, Z. Y., Ahn, I. H. and Moon, S. K., “Process monitoring and inspection systems in metal additive manufacturing: status and applications- a review”, International Journal of Precision Engineering and Manufacturing-Green Technology, 4: 235–245, (2017).
• [3] Lu, B., Lan, H. and Liu, H., “Additive manufacturing frontier: 3D printing electronics”, Opto-Electronic Advances, 1(1): 170004-170004, (2018).
• [4] Tibbits, S., “4D printing: multi‐material shape change”, Architectural Design, 84(1): 116-121, (2014).
• [5] Jamróz, W., Szafraniec, J., Kurek, M. and Jachowicz, R., “3D Printing in Pharmaceutical and Medical Applications - Recent Achievements and Challenges”, Pharmaceutical Research, 35(9): 1-22, (2018).
• [6] Boydston, A. J., Cao, B., Nelson, A., Ono, R. J., Saha, A., Schwartz, J. J. and Thrasher, C. J., “Additive manufacturing with stimuli-responsive materials”, Journal of Material Chemistry A, 6(42): 20621–20645, (2018).
• [7] https://www.sculpteo.com/en/articles-about-3D-printing/4D-printing-technology/ Access date: 19.03.2021
• [8] Lu, Q.Y. and Wong, C.H., “Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring”, Virtual and physical prototyping, 13(2): 39-48, (2018).
• [9] Saritha, D., Boyina, D., “A concise review on 4D printing technology”, Materials Today: Proceedings, 46(1): 692-695, (2021).
• [10] Li, X., Shang, J. and Wang, Z., “Intelligent materials: a review of applications in 4D printing, Assembly Automation”, 37(2): 170-185, (2017).
• [11] Grinberg, D., Siddique, S., Le, M.Q., Liang, R., Capsal, J.F. and Cottinet, P.J., “4D Printing based piezoelectric composite for medical applications”, Journal of Polymer Science / part- B. Polymer Physics, 57 (2): 109 -115, (2019).
• [12] Ding, H., Zhang, X., Liu, Y. and Ramakrishna, S., “Review of mechanisms and deformation behaviors in 4D printing”, International Journal of Advanced Manufacturing Technology, 105 (11): 4633 – 4649, (2019).
• [13] Zhang, Y., Wang, Q., Yi, S., Lin, Z., Wang, C., Chen, Z. and Jiang, L., “4D printing of magneto active soft materials for on-demand magnetic actuation transformation”, ACS Applied Materials & Interfaces, 13(3): 4174 - 4184, (2021).
• [14] Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T. and Qi, H. J., “Multi-shape active composites by 3D printing of digital shape memory polymers”, Scientific Reports, 6: 24224, (2016).
• [15] Deshmukh, K., Houkan, M.T., AlMaadeed, M.A. and Sadasivuni, K.K., “Introduction to 3D and 4D printing technology: State of the art and recent trends”, 3D and 4D Printing of Polymer Nanocomposite Materials, 1(1): 1-24 (2020).
• [16] Yang, H., Leow, W.R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C. and Chen, X., “3D printed photo responsive devices based on shape memory composites”, Advanced Materials, 29(33): 1701627, (2017).
• [17] Kuang, X., Chen, K., Dunn, C. K., Wu, J., Li, V. C. and Qi, H. J., “3D printing of highly stretchable, shape-memory, and self-healing elastomer toward novel 4D printing”, ACS Applied Materials & Interfaces, 10(8): 7381-7388, (2018).
• [18] Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B. and Xie, T., “Ultrafast digital printing toward 4D shape changing materials”, Advanced Materials, 29(7): 1605390, (2017).
• [19] Skylar-Scott, M. A., Gunasekaran, S. and Lewis, J. A., “Laser-assisted direct ink writing of planar and 3D metal architectures”, Proceedings of the National Academy of Sciences, 113(22): 6137-6142, (2016).
• [20] Khattak, H. K., Bianucci, P. and Slepkov, A. D., “Linking plasma formation in grapes to microwave resonances of aqueous dimmers”, Proceedings of the National Academy of Sciences, 116(10): 4000-4005, (2019).
• [21] Javaid, M. and Haleem, A., “4D printing applications in medical field: a brief review”, Clinical Epidemiology and Global Health, 7(3): 317-321, (2019).
• [22] Pei, E. and Loh, G. H., “ Technological considerations for 4D printing: an overview”, Progress in Additive Manufacturing, 3(1-2): 95-107, (2018).
• [23] Haleem, A., Javaid, M. and Vaishya, R., “5D printing and its expected applications in Orthopaedics”, Journal of Clinical Orthopaedics and Trauma, 10: 809 - 810, (2019).
• [24] Valiulis, D. and Jurkonis, E., “Additive manufacturing by 3D and 4D printing methods: a review of materials, methods and applications”, Journal of Chemical Technology and Metallurgy, 55(6): 2094-2104, (2020).
• [25] Wu, J.J., Huang, L.M., Zhao, Q. and Xie, T., “4D Printing: History and Recent Progress”, Chinese Journal of Polymer Science, 36(5): 563-575, (2018).
• [26] Ramesh, S., Usha, C., Naulakha, N.K., Adithyakumar, C.R. and Reddy, M.L.K., “Advancements in the Research of 4D Printing-A Review”, IOP Conference Series: Materials Science and Engineering, 376: 1-10, (2018).
• [27] Zhang, Z., Demir, K. G., and Gu, G. X., “Developments in 4D-printing: a review on current smart materials, technologies, and applications”, International Journal of Smart and Nano Materials, 10(3): 205-224, (2019).
• [28] https://www.futurebridge.com/industry/perspectives-mobility/4d-printing-the-technology-of-the-future/ Access date: 13.02.2021.
• [29] https://www.marketsandmarkets.com/Market-Reports/4d-printing-market/ Access date: 07.06.2015.
• [30] Singholi, A.K. and Sharma, A., “Finding Capabilities of 4D Printing”, International Journal of Engineering and Advanced Technology, 8(5): 1095-1110, (2019).