Beamforming Radiation Properties of Absorbing/Transparent Zones-Added Horn Antenna

Year 2020, Volume: 33 Issue: 2, 355 - 363, 01.06.2020

Ahmet Teber

https://doi.org/10.35378/gujs.602204

Abstract

In this study, we present beamforming of radiation patterns on a transmitter horn antenna by mounting an electromagnetic wave absorber, in which electromagnetic wave absorber is fabricated as concentric zones. The concentric zones consist of an absorbing material of manganese soft spinel ferrite blended with multi-walled carbon nanotubes with the thickness of 1 mm installed on the aperture of the antenna working in Ku-band. We have experimentally measured scattering parameter of transmission, S21, using a vector network analyser to perform radiation patterns in polar coordinates. As compared to the radiation properties of air horn antenna and absorbing/transparent zone-added horn antenna produces an appreciable effect to concentrate radiation beam in the main, side and back lobes with reducing side and back lobe levels for each frequency in H-plane. For the radiation pattern in E-plane, we have observed the suppressed side lobes at three frequencies of 15 GHz, 17 GHz and 18 GHz. The results indicate that the absorbing/transparent zone keeps an important role for further development of the applications of directional antennas so that the effective radiation is to be significantly concentrated.

Keywords

Antenna Gain, Absorbing Material, Fresnel Zone Plates, Horn Antenna, Side/back lobe

References

• [1] V. Bogush, "Application of electroless metal deposition for advanced composite shielding materials", Journal of Optoelectronics and Advanced Materials. 7: 1635-1642, (2005).
• [2] A. Teber, I. Unver, H. Kavas, B. Aktas, R. Bansal, "Knitted radar absorbing materials (RAM) based on nickel-cobalt magnetic materials", Journal of Magnetism and Magnetic Materials, 406: 228-232, (2016).
• [3] Y. Naito, K. Suetake, "Application of ferrite to electromagnetic wave absorber and its characteristics", IEEE Trans. Microw. Theory Tech. 19: 65–72, (1971).
• [4] A. Teber, K. Cil, T. Yilmaz, B. Eraslan, D. Uysal, G. Surucu, A. Baykal, R. Bansal, "Manganese and zinc spinel derrites by blended with multi-walled carbon nanotubes as microwave absorbing materials", Aerospace. 4(1): 2, (2017).
• [5] W. B. Weir, "Automatic measurement of complex dielectric constant and permeability at microwave frequencies", Proceedings of the IEEE, 62(1): 33–36, (1974).
• [6] A. Öztürk, R. Süleymanli, B. Aktaş, A. Teber, "Propagation of microwaves in periodic layered media", 10th Mediterranean Microwave Symposıum, IEEE. 4-7, (2010).
• [7] A. Teber, R. Bansal, I. S. Unver, Z. Mehmedi, "The measurement of microwave absorption characteristics of nanocomposites using a coaxıal line technique", International Journal of High Speed Electronics and Systems, 27(01n02): 1840011, (2018).
• [8] A. Teber, K. Cil, T. Yilmaz, B. Eraslan, D. Uysal, G. Surucu, A. Baykal, R. Bansal, "Enhancement of microwave absorption properties of soft-skin radar absorbing materials", Ursi.org (2017). [online] Available at: http://www.ursi.org/proceedings/procGA17/papers/Paper_B31P-4(1527).pdf. [Accessed 24 July. 2019].
• [9] A. Teber, "Development of radar absorbing materials (RAMs) based on nano-structured magnetic materials and applications", Opencommons.uconn.edu (2017). [online] Available at: https://opencommons.uconn.edu/cgi/viewcontent.cgi?referer=https://scholar.google.com.tr/&httpsredir=1&article=7836&context=dissertations [Accessed 20 July. 2019].
• [10] R. A. Semplak, "Measurements of selective near-in sidelobe reduction of a Pyramidal, Horn- reflector antenna", Bell System Technical Journal, 62(3): 595-605 (1983).
• [11] V. P. Koronkevich, I. G. Pal`chikova, "Modern zone plates", Optoelectronics instrumentation and data processing C/C of Avtometriya. 1: 85-100, (1992).
• [12] L. C. J. Baggen, "Fresnel zone plate antenna: design and analysis", M.S. thesis, Dept. Elect. Eng., Eindhoven Univ. of Tech., Eindhoven, Netherlands, (1992).
• [13] A. Mahmoudi, R. Afzalzadeh, "Analysis, design and fabrication of centimeter-wave dielectric Fresnel zone plate lens and reflector", The European Physical Journal Applied Physics, 32: 119-124, (2005).
• [14] C. Balanis, "Antenna theory analysis and design", 3 rd ed., Hoboken, New Jersey, A John Wiley & Sons. Inc., (2005).
• [15] R. E. Collins, "Antennas and radiowave propagation", Int. student ed., Stephen W. Director, New York: McGraw-Hill, (1985).
• [16] I. M. Skolnik, "Radar Handbook", 2 nd ed., I. Merrill Skolnik, Ed. New York: McGraw-Hill, (1990).