Practical Equations for Calculating the Root Diameter of Bolts

Year 2021, Volume: 8 Issue: 2, 189 - 196, 28.06.2021

Eray Özbek , Bengi Aykac , Sebahattin Aykaç

Abstract

Since bolts can be removed and reassembled, they are often preferred by civil engineers in steel structures. Bolt root (minor) diameter, in other words, the least diameter of the bolt should be considered for most of the bolted connection design. In this case, the designer either takes the root diameter from the tables or calculates it using complex equations. Therefore, practical linear equations for both Standard Metric and Inch Based American bolts with sufficient accuracy were derived. It is claimed that these equations can save the designer from being dependent on the tables or memorizing complex equations.

Keywords

Bolt, Root Diameter, Minor Diameter, Thread, Steel Structure

References

• AISC (2016). 15th Ed. Steel Construction Manual. American Institute of Steel Construction, USA.
• ASME (2011). ASME B1.1-1989. Unified Inch Screw Threads (UN. UNR. and UNJ Thread Forms). The American Society of Mechanical Engineers, New York, USA.
• ÇYHY (2016). Çelik Yapıların Tasarım, Hesap ve Yapımına Dair Esaslar. Ministry of Environment and Urbanization, Ankara, Turkey.
• ISO (1998). ISO 68-1. ISO General Purpose Screw Threads, Basic Profile Part 1: Metric Screw Threads. The International Organization for Standardization, Geneva, Switzerland.
• Odabaşı, Y. (2000). Ahşap ve Çelik Yapı Elemanları (3rd ed.). Beta Press & Publications, İstanbul, Turkey.
• Salmon, C. G., Johnson, J. E., & Malhas, F. A. (2008). Steel Structures: Design and Behavior (5th ed.). Pearson Education, New Jersey, USA.
• TSE (2016). TS 61-2. Vida Dişleri- ISO Genel Amaçlı. Metrik- Bölüm 2, Normal Adımlı- Anma Çapı 1 mm - 68 mm Olan Vida Dişleri için Anma Ölçüleri. Turkish Standards Institution, Ankara, Turkey.