Endüstriyel Alanlarda Kullanılan Veri İletim Tekniklerinin Karşılaştırılması

Year 2014, Volume: 2 Issue: 1, 181 - 188, 28.03.2014

Seyfettin Vadı , Naki Guler Ramazan Bayındır

Abstract

Bu çalısmada, endüstriyel sistemlerde kullanılan veri iletim tekniklerinin karsılastırılması yapılarak amaca ve sisteme uygun iletisim tekniğinin belirlenmesi için göz önünde bulundurulması gereken hususlar belirtilmistir. Uluslararası standartlara göre belirlenmis ve yaygın olarak kullanılan veri iletim teknikleri hakkında bilgiler verilerek karsılastırılmaları yapılmıstır. Özellikle günümüzde hızla yaygınlasan kablosuz iletisim teknolojileri hakkında iletisim hızı, iletisim mesafesi ve çalısma frekansları gibi teknik bilgiler detaylandırılarak iletisim destekli sistemlerde seçim yapılması kolaylastırılmıstır. Verilen bilgiler ve yapılan karsılastırmalar, endüstriyel iletisime ihtiyaç duyan projeler için yol gösterici özellik tasımaktadır.

Anahtar Kelimeler: GPRS, RF, PLC, Bluetooth

 

ABSTRACT

 

In this study, the data transmission techniques used in industrial systems have compared and issues for determining appropriate communication technique that is suitable for the user’s aim and system must be considered is specified. Technical informations and comparisons about determined according to international standards and widely used data transmission techniques are given. Technical information such as transmission baud rate, distance and operating frequency about nowadays rapidly spreading wireless communication technology are given in details to make easier selection in communication supported systems. The informations presented and comparisons made provide guidance for the projects in need of industrial communication feature.

 

Key words: GPRS, RF, PLC, Bluetooth

Keywords

GPRS, RF, PLC, Bluetooth

References

• [1] Kevin M. Middaugh, "A Comparison of Industrial Communications Networks", IEEE Transactions on Industry Applications, Vol. 29, No. 5.
• [2] Jean-Dominique Decotignie, "Ethernet-Based Real-Time and Industrial Communications", [3] Proceedings of the IEEE, Vol. 93, No. 6, 2005.
• [4] Jimmy Kjellsson, Anne Elisabeth Vallestad, Richard Steigmann, and Dacfey Dzung, "Integration of aWireless I/O Interface for PROFIBUS and PROFINET for Factory Automation", IEEE Transactions on Industrial Electronics, Vol. 56, No. 10, 2009.
• [5] Volker Schuermann, Thorsten Mann, Aurel Buda, Joerg F. Wollert, "Integrating Bluetooth Localization into Existing TCP/IP Networks", IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009.
• [6] W. Hashim,S. Dzulkifly,N.A Abd Ghafar, A.F. Ismail, K. Abdullah, "Mobile Broadband Networks Performance Modeling Based on Experimental Studies", International Conference of Statistics in Science, Business, and Engineering (ICSSBE), pp:1-5, 2012.
• [7] Gerd Bumiller, Thilo Sauter, Gerhard Pratl, Albert Treytl, "Secure and Reliable Wide-Area Power-Line Communication for Soft-Real-Time Applications within REMPLI", International Symposium of Power Line Communications and Its Applications, pp:57-60, 2005.
• [8] Filipe Pacheco, Maksim Lobashov, Miguel Pinho, Gerhard Pratl, "A power line communication stack for metering, SCADA and large-scale domotic applications", International Symposium of Power Line Communications and Its Applications, pp:61-65, 2005.
• [9] Yüksel, M.E., Zaim, A. H.,“Rfıd’nin Kablosuz Đletişim Teknolojileri Đle Etkileşimi”, Akademik Bilişim 2009 Harran Üniversitesi, Şanlıurfa, 11 - 13 Şubat 2009.
• [10] Lee, SS ; Kim, B ; Kim, JY .; Choi, S ; Kim, C.; An IEEE 802.15.4g SUN OFDM-Based RF CMOS Transceiver for Smart Grid and CEs", Ieee Internatıonal Conference On Consumer Electronıcs (ICCE), pp:520-521, 2013.
• [11] Kutlu, A., “Wireless Medium Access Control Protocols for Real Time Đndustrial Applications”, The University of Sussex School of Engineering, PhD Thesis, 124s, Brighton, England.
• [12] Mullner, R., Ball, C.F., Ivanov, K., Treml, F., Spring, G., “Quality of service in GPRS/EDGE mobile radio networks”, Vehicular Technology Conference, 2004. VTC 2004-Spring. 2004 IEEE 59th Volume 5, pp. 2507-2511, 2004.
• [13] Pribylov, V.P., Rezvan, I.I., “On the way to 3G networks: the GPRS/EDGE concept”, Microwave Electronics: Measurements,Identification,Applications, MEMIA 2003. Proceedings of the 4th IEEERussia Conference, pp. 87-98,2003.
• [14] Moon, SE ; Choi, NJ ; Lee, HK ; Lee, J ; Yang, WS, "Semiconductor-Type MEMS Gas Sensor for Real-Time Environmental Monitoring Applications", Etri Journal, Vol: 35, pp: 617- 624, 2013.
• [15] Olivo, J.; Carrara, S.; De Micheli, G., "A Study of Multi-Layer Spiral Inductors for Remote Powering of Implantable Sensors", Biomedical Circuits and Systems, IEEE Transactions, Vol:7, pp:536-547, 2013.
• [16] Shang, T ; Huang, FH ; Chen, J ; Liu, JW "A Security-enhanced Key Distribution Scheme for AODVjr Routing Protocol in ZigBee Networks", Chınese Journal of Electronıcs,Vol: 22, pp: 577-582.
• [17] S. Ouni, Z.T. Ayoub, "Cooperative Association/Re-association Approaches to Optimize Energy Consumption for Real-Time IEEE 802.15.4/ZigBee Wireless Sensor Networks", Wireless Pers Communication, Vol:71, pp:3157–3183,2013.
• [18] Ken Masica, April 2007, Recommended Practices Guide For Securing Zigbee Wireless Networks in Process Control System Environments, Lawrence Livermore National Laboratory.
• [19] Yu-Kai Chen, Yung-Chun Wu, Chau-Chung Song, and Yu-Syun Chen, "Design and Implementation of Energy Management System With Fuzzy Control for DC Microgrid Systems", IEEE Transactions on Power Electronics, Vol. 28, No. 4, 2013.
• [20] Bhatt, U ; Verma, HK, Kumar, A , "Automation and remote control of volumetric calibrator using RS485/MODBUS protocol", 2nd International Conference on Power, Control and Embedded Systems (ICPCES), 2012.
• [21] Niv Goldenberg, Avishai Wool, "Accurate modeling of Modbus/TCP for intrusion detection in SCADA systems, international journal of critical in frastructure protection 6, 2013, pp:63-75.
• [22] B. Dutertre. Formal modeling and analysis of the Modbus protocol. Technical report, omputer Science Laboratory, SRI International, October 2006.
• [23] U. Lindqvist and P. A. Porras. Detecting computer and network misuse through the production-based expert system toolset (PBEST). In Proceedings of the 1999 IEEE Symposium on Security and Privacy, pages 146–161, Oakland, California, May 9–12, 1999.
• [24] Piotrowski, A; Nieszporek, T; "Setting up a work centre based on the profibus network", 11th International Conference on Industrial, Service and Humanoid Robotics (ROBTEP 2012), Vol:282, pp:51-58.
• [25] Zhang, P; Shen, MD; Design of Automatic Sorting System of Boxed Drugs Based on Profibus-DP, 3rd International Conference on Manufacturing Science and Engineering (ICMSE 2012), Vol: 468-471, pp:848-851.
• [26] Xia, LL, Qiu, C, Fu, ZL, Pan, XY, "A Novel Design of Profibus-DP Communication Interface Card for the Intelligent Instruments of Field Network", IEEE International Conference on Automation and Logistics (ICAL), 2012, pp: 382-385.
• [27] Zhang, YS; Liu, MM; Zhao, FZ; "The Design and Implementation of PLC Monitoring System Based on OPC", International Conference on Mechatronics and Control Engineering (ICMCE 2012), Vol: 278-280, pp: 930-935.
• [28] Seno, L; Tramarin, F; Vitturi, S; "Performance of Industrial Communication Systems: Real Application Contexts", International Conference on Mechatronics and Control Engineering (ICMCE 2012), Vol:6, pp: 27-37.
• [29] He, JZ ; Zhao, ZX ; Zhong, ZN , "The Design and Application of PLC Master-slave Control System Based on MPI", International Conference on Measurement, Instrumentation and Automation (ICMIA 2012), Vol: 241-244, pp:1908-1912.
• [30] Zhao, XM, "Realization of Serial Port Expansion Circuit", 3rd International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2012), Vol: 271-272, pp:1597-1601.
• [31] Emilio, MD; "USB and RS232 in Data Acquisition System Design", Electronıcs World, Vol: 118, Issue:1916, pp:42-43, 2012