The
production of an intelligent textile material that changes color under the
influence of pH was researched in this research article. For this purpose,
halochromic dyes were used. In halochromic dyes, bleeding and fastness
problems are encountered after dyeing. In order to solve these problems; the dye is fixed with cationic fixators in the
textile fiber. In this study, a woven nylon fabric was dyed with Alizarin Red S
halochromic dyestuff by conventional dyeing method which was followed by
post-treated by tannic acid/potassium antimony tartarate at different ratios
(1%, 2%, 3%). After dyeing and post-treating, CIELab, K/S, ΔE* values were
measured by spectrophotometer and compared. In order to investigate the effect of halochromics on the post-treated, dyed and post-treated
fabrics were immersed in 5 different solutions prepared by using HCl and NaOH between pH 2 and 10, and the samples
were removed after 1 hour and the color change in the samples was
compared. After the process, the speed of fixation of the dye molecule onto the
fiber was increased.
Corrected by Aslıhan Koruyucu and Ayben Pakolpakçıl
Correction to: An experimental study on production of intelligent textile by using ionochromic materials
International Advanced Researches and Engineering Journal 04(01): 056, 2020
Primary Language | English |
---|---|
Subjects | Engineering |
Journal Section | Research Articles |
Authors | |
Publication Date | December 15, 2019 |
Submission Date | February 13, 2019 |
Acceptance Date | September 28, 2019 |
Published in Issue | Year 2019 |