Tensile Strength of Adhesively Bonded and Hybrid (Bonded/Riveted) Dissimilar Single-Lap Joints

Year 2022, Volume: 6 Issue: 4, 398 - 403, 31.12.2022

Erhan Cetin

https://doi.org/10.30939/ijastech..1193217

Cited By: 2

Abstract

Glass fiber-reinforced composites are commonly employed as structural materials in many fields. In addition, glass fiber-reinforced composites are frequently used with metals, particularly in the automotive and aerospace industry. In this context, the tensile strengths of simple and hybrid single-lap joints having similar (i.e., aluminum/aluminum and composite/composite) and dissimilar (i.e., aluminum/composite) plates were investigated experimentally in this study. At this point, 6061 aluminum alloy and E-glass/epoxy composite plates were used as the adherends and Araldite 2014-1 was used as the adhesive. The composite adherends produced using the vacuum infusion technique consist of E-glass/epoxy laminates with [0°/90°/+45°/−45°]6 stacking sequence. Two different types of joints (i.e., adhesively bonded and bonded/riveted) were employed for similar and dissimilar joints. In addition, both 3-rivet and 4-rivet joints were used in bonded/riveted joints. The results revealed that the strength of the joints could be considerably increased with the addition of rivets to the adhesively bonded joints. In particular, the results showed that the strength value of the bonded/4-riveted joint is 5.7 times higher than the adhesively bonded joints.

Keywords

Simple joints, hybrid joints, dissimilar plates, adhesively bonded joints, bonded/riveted joints

References

• [1] Banea MD, da Silva LFM. Adhesively bonded joints in composite materials: an overview. Proc Inst Mech Eng Part L J Mater Des Appl [Internet]. 2009 [cited 2015 Jan 6];223:1–18.
• [2] Budhe S, Banea MD, de Barros S, et al. An updated review of adhesively bonded joints in composite materials. Int J Adhes Adhes [Internet]. 2017;72:30–42.
• [3] Abdel Wahab MM. Fatigue in Adhesively Bonded Joints: A Review. ISRN Mater Sci [Internet]. 2012 [cited 2015 Jan 6];2012:1–25.
• [4] da Silva LFM, das Neves PJC, Adams RD, et al. Analytical models of adhesively bonded joints—Part I: Literature survey. Int J Adhes Adhes [Internet]. 2009;29:319–330.
• [5] He X. A review of finite element analysis of adhesively bonded joints. Int J Adhes Adhes [Internet]. 2011 [cited 2014 Dec 29];31:248–264.
• [6] Lee B, Son I, Kim JH, et al. Polymeric nanocapsules containing methylcyclohexane for improving thermally induced debonding of thin adhesive films. J Appl Polym Sci [Internet]. 2018;135:46586.
• [7] Yousefi Kanani A, Green S, Hou X, et al. Hybrid and adhesively bonded joints with dissimilar adherends: a critical review. J Adhes Sci Technol [Internet]. 2021;35:1821–1859.
• [8] Li S, Guo X, Li Q, et al. On lateral crashworthiness of aluminum/composite hybrid structures. Compos Struct [Internet]. 2020;245:112334.
• [9] Guden M, Yüksel S, Taşdemirci A, et al. Effect of aluminum closed-cell foam filling on the quasi-static axial crush performance of glass fiber reinforced polyester composite and aluminum/composite hybrid tubes. Compos Struct [Internet]. 2007;81:480–490.
• [10] Babbage JM, Mallick PK. Static axial crush performance of unfilled and foam-filled aluminum-composite hybrid tubes. Compos Struct. 2005;70:177–184.
• [11] Yildirim M, Apalak MK, Yildirim M. Transverse Low-Speed Impact Behavior of Adhesively Bonded Similar and Dissimilar Clamped Plates. J Adhes Sci Technol [Internet]. 2012 [cited 2015 Jan 12];25:69–91.
• [12] Yildirim M, Apalak MK, Yildirim M. Effect of Adhesive Thickness on Transverse Low-Speed Impact Behavior of Adhesively Bonded Similar and Dissimilar Clamped Plates. J Adhes Sci Technol [Internet]. 2011 [cited 2015 Jan 12];25:2587–2613.
• [13] Kilic B, Madenci E, Ambur DR. Influence of adhesive spew in bonded single-lap joints. Eng Fract Mech [Internet]. 2006;73:1472–1490.
• [14] Liu D, Xin R, Zheng X, et al. Microstructure and mechanical properties of friction stir welded dissimilar Mg alloys of ZK60–AZ31. Mater Sci Eng A [Internet]. 2013;561:419–426.
• [15] Chandra Shekar K, Suresh Kumar S. A review on ultrasonic characterisation of dissimilar plates by friction stir welding. Mater Today Proc [Internet]. 2021;51:1021–1025.
• [16] Wang X, Mu R, Wang C. Numerical Simulation and Experimental Study on Self-piercing Riveting of DC03/6016 Dissimilar Sheets. 2020 3rd Int Conf Electron Device Mech Eng [Internet]. IEEE; 2020. p. 463–466.
• [17] Kai Z, Junying M, Jianping L, et al. Analysis on mechanical properties of self-piercing riveted joints for carbon fiber reinforced polymer and AA6022-T4 aluminum alloy. Forg Stamp Technol. 2019;44:150–156.
• [18] Moroni F, Pirondi A, Kleiner F. Experimental analysis and comparison of the strength of simple and hybrid structural joints. Int J Adhes Adhes [Internet]. 2010 [cited 2015 Jan 12];30:367–379.
• [19] Kweon JH, Jung JW, Kim TH, et al. Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding. Compos Struct. 2006;75:192–198.
• [20] Kelly G. Quasi-static strength and fatigue life of hybrid (bonded/bolted) composite single-lap joints. Compos Struct. 2006;72:119–129.
• [21] Fu M, Mallick PK. Fatigue of hybrid ( adhesive / bolted ) joints in SRIM composites. Int J Adhes Adhes. 2001;21:145–159.
• [22] Matsuzaki R, Shibata M, Todoroki A. Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method. Compos Part A Appl Sci Manuf [Internet]. 2008;39:154–163.
• [23] Sadowski T, Kneć M, Golewski P. Experimental investigations and numerical modelling of steel adhesive joints reinforced by rivets. Int J Adhes Adhes [Internet]. 2010 [cited 2015 Jan 12];30:338–346.
• [24] Barut A, Madenci E. Analysis of bolted–bonded composite single-lap joints under combined in-plane and transverse loading. Compos Struct [Internet]. 2009;88:579–594.
• [25] Di Franco G, Fratini L, Pasta a. Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks. Int J Adhes Adhes [Internet]. 2013 [cited 2015 Jan 6];41:24–32.
• [26] Hoang-Ngoc C-T, Paroissien E. Simulation of single-lap bonded and hybrid (bolted/bonded) joints with flexible adhesive. Int J Adhes Adhes [Internet]. 2010 [cited 2014 Dec 31];30:117–129.
• [27] Sayman O, Siyahkoc R, Sen F, et al. Experimental Determination of Bearing Strength in Fiber Reinforced Laminated Composite Bolted Joints under Preload. J Reinf Plast Compos [Internet]. 2007;26:1051–1063.
• [28] Akderya T, Çevik M, Sayman O. Influence of thermal ageing on tensile performance of E-glass fibre/epoxy composite joints bonded with a diverse set of adhesives. J Adhes [Internet]. 2020;96:539–564.
• [29] Braiek S, Zitoune R, Ben Khalifa A, et al. Experimental and numerical study of adhesively bonded ±55° filament wound tubular specimens under uniaxial tensile loading. Compos Struct [Internet]. 2017;172:297–310.
• [30] Cakir MV, Kinay D. MWCNT, nano‐silica, and nano‐clay additives effects on adhesion performance of dissimilar materials bonded joints. Polym Compos [Internet]. 2021;42:5880–5892.
• [31] Park SW, Lee DG. Strength of Double Lap Joints Bonded With Carbon Black Reinforced Adhesive Under Cryogenic Environment. J Adhes Sci Technol [Internet]. 2009;23:619–638.
• [32] Maas JM, Grönquist P, Furrer J, et al. Residual stresses in adhesively bonded wood determined by a bilayer flexion reporter system. Wood Sci Technol [Internet]. 2022;56:1293–1313.
• [33] Karachalios EF, Adams RD, da Silva LFM. The behaviour of single lap joints under bending loading. J Adhes Sci Technol [Internet]. 2013;27:1811–1827.
• [34] Ozel A, Yazici B, Akpinar S, et al. A study on the strength of adhesively bonded joints with different adherends. Compos Part B Eng [Internet]. 2014;62:167–174.
• [35] Mariam M, Afendi M, Abdul Majid MS, et al. Influence of hydrothermal ageing on the mechanical properties of an adhesively bonded joint with different adherends. Compos Part B Eng [Internet]. 2019;165:572–585.