The Effects of Animal Bone Ash on Asphalt Pavement Mixtures

Year 2024, , 76 - 93, 24.07.2024

Burak Öntaş , Jülide Öner

https://doi.org/10.24107/ijeas.1459779

Abstract

This study focuses on alternative raw material sources to meet the demand for sustainable construction materials. Particularly, it is suggested that waste materials, such as animal by-products, could provide a solution for enhancing the mechanical properties and durability of asphalt concrete. The research aims to improve the physical and mechanical properties of asphalt concrete by utilizing bone powder obtained from Category 3 animal by-products through a hydrolysis procedure. Experiments conducted showed that the addition of 5% bone powder increased maximum stability when used in conjunction with different percentages of bitumen. Overall, some positive developments were observed in the physical and mechanical properties of asphalt concrete containing animal bone ash, possibly due to strengthening the bond between aggregate particles and bitumen material. This study highlights the potential of animal bone ash in improving the mechanical properties of asphalt concrete and recommends a 5% bone powder addition for optimum stability and durability. However, further research and field tests are needed to better understand the long-term effects of animal bone ash and its performance under different road conditions.

Keywords

Sustainable construction materials, Asphalt concrete, Mechanical properties, Animal bone powder, Stability

Thanks

This study was conducted with the support and resources provided by Instituto Superior de Engenharia de Coimbra.

References

• Dağdelen, E., Investigation of the Effect of Heat on the Physical Properties of Asphalt Concrete, Firat University Institute of Science; Master's Thesis, 1995.
• Al-Hadidy, A.I., Tan, Y.Q., Mechanistic analysis of ST and SBS-modified flexible pavements. Construction and Building Materials, 23(8), 2941-2950, 2009.
• Şengöz, B., Topal, A., Use of asphalt roofing shingle waste in HMA. Construction and Building Materials, 19(5), 337-346, 2005.
• Polat, H., Analysis of the Physical Properties and Compaction of Bituminous Mixture Surface Layers of Ankara Gerede, Ankara Ring Road, Gazi University Institute of Science,1994.
• TS 118: Petroleum products, determination of needle penetration of bitumens and bituminous binders, Turkish Standards Institution, 1998.
• Thom, N., Elliott, R., Asphalt properties and test methods: In ICE Manual of Construction Materials, Fundamentals and Theory;1nd edition, 2009.
• Zaumanis, M., Mallick, R. B., Examining the use of very high content reclaimed asphalt in plant-produced asphalt mixtures. International Journal of Pavement Engineering, 15(1), 39–55, 2014.
• Yan, K. Z., Xu, H. B., Zhang, H. L., Effect of mineral filler on properties of warm asphalt mastics containing Sasobit. Construction and Building Materials, 48, 622–627, 2013.
• Huang, Y., Bird, R. N., Heidrich, O., A review of the use of recycled solid waste materials in asphalt pavements. Resources, Conservation and Recycling, 52(1), 58–73, 2007
• Bindu, C. S., Joseph, M. S., Sibinesh, P. S., George, S., Sivan, S., Evaluation of warm mix asphalt performance using natural rubber modified bitumen and cashew nut shell liquid. International Journal of Pavement Research and Technology, 13(4), 442–453, 2020.
• Sung D., Hwang., Park H.M., & Rhee S.K., An Investigation on the Engineering Properties of Asphalt Concretes with Recycled Lime Filler. Waste Management, 28(1), 191–199, 2008.
• Modarres, A., Rahmanzadeh, M., Application of waste coal ash in hot mix asphalt as filler. Construction and Building Materials, 66, 476–483, 2014.
• El-Busaltan, Ş., Evaluation of Asphalt Mixtures Containing Waste and By-Product Material Fillers. Kerbela University Journal, (2), 130-141, 2016.
• Tahami, S. A., Arabani, M., & Mirhosseini, A. F., Use of two biomass ashes as filler in hot mix asphalt. Construction and Building Materials,170, 547–556, 2018.
• Sharma, V., Chandra, S., Choudhary, R., Characterization of fly ash-bitumen modified mixes. Construction and Building Materials, 24(12), 2354–2360, 2010.
• Choi, M. J., Kim, Y. J., Kim, H. J., Lee, J. J., Performance evaluation of rubber-derived fuel fly ash as mineral filler in hot mix asphalt. Journal of Traffic and Transportation Engineering, 7(2), 249–258, 2020.
• Choudhary, J., Kumar, B., Gupta, A., Application of waste materials as filler in bituminous mixes. Waste Management, 78, 417–425, 2018.
• Tarbay, E. W., Azam, A. M., El-Badawy, S. M., Asphalt mixtures with waste materials and by-products as mineral fillers. Innovative Infrastructure Solutions, 4(1), 1–13, 2018.
• Sargın, Ş., Saltan, M., Morova, N., Serin, S., Terzi, S., Evaluation of rice husk ash as filler in hot mix asphalt concrete. Construction and Building Materials, 48, 390–397, 2013.
• Yüceer, A., Çelik, O. N., The use of polymers in asphalt concrete and evaluation of waste plastics. Chamber of Civil Engineers Journal, 227-234, 1991.
• Yıldırım, Y., Polymer modified asphalt binders. Construction and Building Materials, 21, 66-72, 2005.
• Navarro, F. J., Partal, P., Martinez-Boza, F., Gallegos, C., Valencia, C., Thermo-rheological behaviour and storage stability of ground tire rubber-modified bitumens. Fuel, 83(14), 2041–2049, 2004.
• Ruan, Y., Davison, R. R., Glover, C. J., The effect of long-term oxidation on the rheological properties of polymer modified asphalts. Fuel, 82(15–17), 1763–1773, 2003.
• Navarro, F. J., Partal, P., Martinez-Boza, F., Valencia, C., Gallegos, C., Rheological characteristics of ground tire rubber-modified bitumens. Chemical Engineering Journal, 89(1–3), 53–61, 2002.
• Lu, X., & Isacsson, U., Modification of road bitumens with thermoplastic polymers. Polymer Testing, 20(1), 77–86, 2001.
• Isacsson, U., Lu, X., Characterization of bitumens modified with SEBS, EVA and EBA polymers. Journal of Materials Science, 34(16), 3737–3745, 1999.
• Raza, H., Rizvi, Khattak, M. J., Gallo, A. A., Rheological and mechanistic properties of bone adhesive-modified asphalt binders. Construction and Building Materials, 88, 64–73, 2015.
• Muhammed, A., Aboje, A. A., Auta, M., Cibril, M., Comparative analysis and characterization of bone adhesive as adsorbent. Pelagia Research Library Advances in Applied Science Research, 3(5), 3089–3096, 2012.
• Asif, A., Ahmed, N., Adeel, M., Zaidi, S. B. A., Jameel, M. S., Qureshi, F. A., Asif, S. A., Performance evaluation of bone glue modified asphalt. Advances in Materials Science and Engineering, 3157152, 2019.
• Ahmedzade, P., The investigation and comparison effects of SBS and SBS with new reactive terpolymer on the rheological properties of bitumen. Construction and Building Materials, 38, 285–291, 2013.
• Gökalp, İ., Uz, V. E., Investigation of the Effect of Waste Vegetable Cooking Oils on the Properties of Pure Bitumen. Journal of Engineering Sciences and Design, 6(4), 570–578, 2018.
• Gökalp, İ., Uz, V. E., Utilizing of Waste Vegetable Cooking Oil in Bitumen: Zero Tolerance Aging Approach. Construction and Building Materials, 227, 116695, 2019.
• Bagampadde, U., Investigations on Moisture Damage-related Behaviour of Bituminous Materials. Civil and Architectural Engineering; Doctoral Thesis, 2005.
• Hunter, E. R., Evaluating Moisture Susceptibility of Asphalt Mixes. University of Wyoming; Laramie, 2001.
• Zaniewski, J., Viswanathan, A. G., Investigation of Moisture Sensitivity of Hot Mix Asphalt Concrete, West Virginia University, 2006.
• Balta, İ., Sensitivity of Bituminous Hot Mixtures to Moisture-Induced Deterioration. Dokuz Eylül University Institute of Science, Izmir; Master's Thesis, 2004.
• Lavin, P.G., Asphalt Pavements, Spon Press, London and New York, 444p, 2003.
• The Asphalt Institute: Superpave Mix Design, Superpave Series No. 2 (SP-2), U.S.A, 1996.