Critically Evaluate the Capabilities of Ultrasonic Techniques Used for Tracing Defects in Laminated Composite Materials

Year 2018, , 237 - 251, 04.11.2018

Senan Thabet Yaser Jasim Thabit Thabit

https://doi.org/10.24107/ijeas.465749

Cited By: 11

Abstract

A Non-Destructive Test (NDT) technique is the fundamental strategy
to look at a large portion of the materials, composite materials specifically.
There are an excessive number of NDT techniques to assess the materials, for
example, Visual Inspection, Liquid Penetrate Inspection, Eddy-Current
Inspection, Phased Array Inspection, Magnetic Particle Inspection and
Ultrasonic Inspection. The report delineates the Ultrasonic Test (UT) research
centre examination that was directed with the group number 5 in the University
lab, a few references and resources are utilised as a part of this
investigation to completely exhibit the applications and deformity traceability
of UT in covered composites. The paper finishes up the examination with the
capacities and restrictions of the two systems and prescribes techniques to
endeavour lessening the confinements.

Keywords

Non-Destructive Testing, Ultrasonic Testing, Composite Materials

References

• Salchak, Y., Zhvyrblya, V., Sednev, D., and Lider, A. Digitally focused array ultrasonic testing technique for carbon fiber composite structures, IOP Conference Series: Materials Science and Engineering, 135, 2016.
• Nesvijski, E. Phase Ultrasonic Testing of Joints in Multilayered Composite Materials. Journal of Thermoplastic Composite Materials, 12(2), 154-162, 1999.
• Gryzagoridis, J. Holographic non-destructive testing of composites, Optics & Laser Technology, 21(2),113-116, 1989.
• Shen, Q., Omar, M., and Dongri, S. Ultrasonic NDE Techniques for Impact Damage Inspection on CFRP Laminates. Journal of Materials Science Research, 1(1), 3-14, 2011.
• Kamsu-Foguem, B. Knowledge-based support in Non-Destructive Testing for health monitoring of aircraft structures, Advanced Engineering Informatics, 26(4), 859-869, 2012.
• Reithmaier, L. and Sterkenburg, R. Standard aircraft handbook for mechanics and technicians, 7th edition, McGraw-Hill Education, 2014.
• Sharpe, R. Non-destructive testing, Non-Destructive Testing, 9(1), 55, 1976.
• Thabit, Thabit H. Adoption the Fuzzy Logic to Enhance the Quality of the Accounting Information to Operate Balanced Scorecard - Applied on Mosul Bank for Development & Investment in Nineveh Province, M.Sc. thesis in accounting, University of Mosul, Mosul, Iraq, 2013.
• Thabit, Thabit H., and Jasim, Yaser A. A Manuscript of Knowledge Representation, International Journal of Social Sciences & Economic Environment, 1(1), 44-55, 2015.
• Thabet, S., and Thabit, Thabit H. (2018) Computational Fluid Dynamics: The Science of Future, International Journal of Research and Engineering, 5(6), 430-433, 2018.
• Thabet, Senan, and Thabit, Thabit H. CFD Simulation of the Air Flow around a Car Model (Ahmed Body), International Journal of Scientific and Research Publications, 8(8).
• Krautkrämer, J., and Krautkrämer, H. Ultrasonic Testing of Materials, Berlin, Heidelberg: Springer Berlin Heidelberg, 1983.
• Raj, B., Jayakumar, T., and Thavasimuthu, M. Practical non-destructive testing, Oxford, U.K.: Alpha Science International, 2008.
• Thabit, Thabit H., and Younus, Saif Q. Risk Assessment and Management in Construction Industries, International Journal of Research and Engineering, 5(2), 315-320, 2018.
• Bouden, T., Djerfi, F., and Nibouche, M. Adaptive split spectrum processing for ultrasonic signal in the pulse echo test, Russian Journal of Nondestructive Testing, 51(4), 245-257, 2015.
• Bates, C. Non-destructive testing techniques, Non-Destructive Testing, 2(1), 55, 1969.
• Thabet, Senan, Thabit, Thabit H., and Jasim, Yaser A. CFD Analysis of a Backward Facing Step Flows, International Journal of Automotive Science and Technology, 2(3), 10-16, 2018.
• Berthelot, J. Damping Analysis of Sandwich Composite Materials, Journal of Composite Materials, 2009.
• Halmshaw, R. Non destructive testing, London, 1991.
• Hoagland, A. S. Storage Technology: Capabilities and Limitations, Computer, 12(5), 12-18, 1979.
• Schall, W. Non-destructive testing, Brighton: Machinery Pub, 1968.