Elastic Stresses of Rotating Transversely Isotropic Fiber Reinforced Composite Cylinders

Year 2020, Volume: 12 Issue: 4, 125 - 137, 29.12.2020

Ömer Can Farukoğlu , İhsan Korkut

https://doi.org/10.24107/ijeas.801030

Abstract

In this study, rotating long thick-walled fiber reinforced composite cylinders with closed ends are investigated within the elastic limits by using analytical methods. Hoffman yield criteria is employed to the elastic problem to find limit angular velocities. Composite body of the cylinders are consisting of isotropic matrix and transversely isotropic fibers which are unidirectionally aligned in circumferential direction. Alterations on the elastic stress and displacement fields are examined by taking various fiber volume fraction and wall thickness values. Obtained results emphasized that both parameters highly influence the distributions of stress, displacement and commencement of the yielding.

Keywords

rotating cylinders, composite cylinders, stress analysis, analytical methods

Supporting Institution

-

Project Number

-

Thanks

-

References

• Dai, T., Dai, H. L., Investigation of mechanical behavior for a rotating fgm circular disk with a variable angular speed, Journal of Mechanical Science and Technology, 29(9), 3779-3787, 2015.
• Eraslan, A. N., Arslan, E., Analytical and numerical solutions to rotating fgm disk, Journal of Multidisciplinary Engineering Science and Technology, 2(10), 2843-2850, 2015.
• Zheng, Y., Bahaloo, H., Mousanezhad, D., Mahdi, E., Vaziri, A., Nayeb-Hashemi, H., Stress analysis in functionally graded rotating disks with non-uniform thickness and variable angular velocity, International Journal of Mechanical Sciences, 119, 283-293, 2016.
• Çallıoğlu, H., Bektaş, N. B., Sayer, M., Stress analysis of functionally graded rotating disc: analytical and numerical solutions, Acta Mechanica Sinica, 27(6), 950-955, 2011.
• Horgan, C. O., Chan, A. M., The stress response of functionally graded isotropic linearly elastic rotating disks, Journal of Elasticity, 55(3), 219-230, 1999.
• Yıldırım, V., Effects of inhomogeneity and thickness parameters on the elastic response of a pressurized hyperbolic annulus/disc made of functionally graded material, International Journal of Engineering & Applied Sciences (IJEAS), 9(3), 36-50, 2017.
• Dui, G., Zhou, D., Solutions for behavior of a functionally graded thick-walled tube subjected to mechanical and thermal loads, International Journal of Mechanical Sciences, 98, 70-79, 2015.
• Dui, G., Zhang, J., An elasticity solution for functionally graded thick-walled tube subjected to internal pressure, International Journal of Mechanical Sciences, 89, 344-349, 2014.
• Tütütncü, N., Stresses in thick-walled FGM cylinders with exponentially-varying properties, Engineering Structures, 29(9), 2032-2035, 2007.
• Nejad, M. Z., Rahimi, G. H., Deformations and stresses in rotating fgm pressurized thick hollow cylinder under thermal load, Scientific Research and Essays, 4(3), 131-140, 2009.
• Nie, G. J., Zhong, Z., Batra, R. C., Material tailoring for orthotropic elastic rotating disks, Composites Science and Technology, 71(3), 406-414, 2011.
• Genta, G., Gola, M., The stress distribution in orthotropic rotating disks, Journal of Applied Mechanics, 48(3), 559-562, 1981.
• Çallıoğlu, H., Stress analysis of an orthotropic rotating disc under thermal loading, Journal of Reinforced Plastics and Composites, 23(17), 1859-1867, 2004.
• Eraslan, A. N., Kaya, Y., Varlı, E., Analytical solutions to orthotropic variable thickness disk problems, Pamukkale University Journal of Engineering Sciences, 22(1), 24-30, 2016.
• El-Naggar, A. M., Abd-Alla, A. M., Fahmy, M.A., Ahmed, S. M., Thermal stresses in a rotating non-homogeneous orthotropic hollow cylinder, Heat and Mass Transfer, 39(1), 41-46, 2002.
• Haojiang, D., Huiming, W., Weiqiu, C., Transient thermal stresses in an orthotropic hollow cylinder for axisymmetric problems, Acta Mechanica Sinica, 20(5), 477-483, 2004.
• El-Naggar, A. M., Abd-Alla, A. M., Ahmed, S. M., On the rotation of a non-homogeneous composite infinite cylinder of orthotropic material, Applied Mathematics and Computation, 69(2-3), 147-157, 1995.
• Abd-Alla, A. M., Mahmoud, S. R., Shehri, N. A., Effect of the rotation on a non-homogeneous infinite cylinder of orthotropic material, Applied Mathematics and Computation, 217(22), 8914-8922, 2011.
• Zheng, Y., Bahaloo, H., Mousanezhad, D., Vaziri, A., Displacement and stress fields in a functionally graded fiber-reinforced rotating disk with nonuniform thickness and variable angular velocity, Journal of Engineering Materials and Technology, 139(3), 031010-10, 2017.
• Zenkour, A. M., Allam, M. N. M., On the rotating fiber-reinforced viscoelastic composite solid and annular disks of variable thickness, International Journal for Computational Methods in Engineering Science and Mechanics, 7(1), 21-31, 2006.
• Tahani, M., Nosier, A., Zebarjad, S. M., Deformation and stress analysis of circumferentially fiber-reinforced composite disks, International journal of solids and structures, 42(9-10), 2741-2754, 2005.
• Hoffman, O., The brittle strength of orthotropic materials, Journal of Composite Materials, 1(2), pp. 200-206, 1967.
• Chamis, C. C., Mechanics of composite materials: past, present, and future, Journal of Composites,Technology and Research, 11(1), 3-14, 1989.
• Chamis, C. C., Simplified composite micromechanics equations for strength, fracture toughness, impact resistance and environmental effects, Nasa Technical Memorandum (NASA-E-2154) , Clevland, OH, 1984.
• Kaw, A. K., Mechanics of Composite Materials, CRC Press; 2nd edition, 2002.