Research Article
BibTex RIS Cite

INVESTIGATION OF THE CHANGE INDUCTANCE OF A COIL AS AIR-IRON-SILICON STEEL AND ALUMINUM CORES

Year 2022, Volume: 7 Issue: 2, 99 - 112, 31.12.2022

Abstract

Coils are one of the basic circuit elements of electrical and electronic systems, and their difficulty against the electric current has been known as inductance. So, inductance is a measure of the coils resisting current flow and is the energy storage capacity of the coils. Inductance; It depends on factors such as the number of turns of the coil, the wire cross-section and diameter, the type of core, and the frequency. In the study, the inductance effect of the core to the coil wound on the square carcass; has been experimentally investigated for air, silicon steel, iron, and aluminum environment. In the results obtained, it has been seen that the permeability of the magnetic core material and the effect of the fukolt brake for aluminum are important. The interpretation has been made by examining the effect of inductance in changing alternating voltage values in the core environment.

References

  • [1] Özçelik, M. A. & Aycan, A. Manyetik Olarak Etkileşen Bobinlerin Alternatif ve Doğru Akımda İncelenmesi . Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 20 (4) , 172-180, 2017. DOI: 10.17780/ksujes.356588
  • [2] M. Sahin , "Endüktans Seçim Kriteri ve Güç Elektroniği Uygulamaları için Tasarım Aşamaları", Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, c. 24, sayı. 3, ss. 689-695, Ara. 2020, doi:10.19113/sdufenbed.543986
  • [3] J. Kim and Y. -J. Park, "Approximate Closed-Form Formula for Calculating Ohmic Resistance in Coils of Parallel Round Wires With Unequal Pitches," in IEEE Transactions on Industrial Electronics, vol. 62, no. 6, pp. 3482-3489, June 2015, doi: 10.1109/TIE.2014.2370943
  • [4] H. -I. Du, S. -O. Heo, T. -M. Kim, B. -S. Han, J. -H. Lee and S. -C. Yang, "Effect on Current-Limiting Performance of Combining Condition YBCO Thin-Film Wire Having Different Stabilization Layer With Superconducting Fault Current Limiter Using Iron Core and Coils," in IEEE Transactions on Applied Superconductivity, vol. 24, no. 3, pp. 1-5, June 2014, Art no. 5601705, doi: 10.1109/TASC.2013.2295687.
  • [5] M. Milgrāvis, A. Bojarevičs, A. Gaile and V. Geža, "Design of a System to Compose 50 Hz Alternating and Static Magnetic Field From Induction Coil and Permanent Magnets," in IEEE Magnetics Letters, vol. 11, pp. 1-4, 2020, Art no. 2104704, doi: 10.1109/LMAG.2020.3021364.
  • [6] H. J. Lee et al., "The AC Loss Measurement of the KSTAR PF1 Coils During the First Commissioning," in IEEE Transactions on Applied Superconductivity, vol. 20, no. 3, pp. 551-555, June 2010, doi: 10.1109/TASC.2010.2040264.
  • [7] O. Tikhonova, I. Malygin and A. Plastun, "Calculation of Inductive Resistances of Induction Motor with Ring Windings by “ANSYS Maxwell”," 2018 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM), 2018, pp. 1-4, doi: 10.1109/ICIEAM.2018.8728767.
  • [8] Y. Nikulshin, Y. Wolfus, A. Friedman and Y. Yeshurun, "Improving the Performance of Saturated Cores Fault Current Limiters by Varying Winding Density in the AC Coils," in IEEE Transactions on Applied Superconductivity, vol. 25, no. 3, pp. 1-5, June 2015, Art no. 5602705,
  • [9] D. Mayer, "Inductance of Coil in Nonhomogenous Surrounding," in IEEE Transactions on Magnetics, vol. 45, no. 3, pp. 1032-1035, March 2009, doi: 10.1109/TMAG.2009.2012564.
  • [10] D. M. Sousa and G. D. Marques, "Study of the air gap magnetic field distribution of a nuclear magnetic resonance iron-core magnet," 2008 IEEE Region 8 International Conference on Computational Technologies in Electrical and Electronics Engineering, 2008, pp. 242-247, doi: 10.1109/SIBIRCON.2008.4602640.
  • [11] S. Cho, H. -C. Liu, H. Ahn, J. Lee and H. -W. Lee, "Eddy Current Brake With a Two-Layer Structure: Calculation and Characterization of Braking Performance," in IEEE Transactions on Magnetics, vol. 53, no. 11, pp. 1-5, Nov. 2017, Art no. 8110205, doi: 10.1109/TMAG.2017.2707555.
  • [12] R. Ni, G. Wang, X. Gui and D. Xu, "Investigation of d- and q-Axis Inductances Influenced by Slot-Pole Combinations Based on Axial Flux Permanent-Magnet Machines," in IEEE Transactions on Industrial Electronics, vol. 61, no. 9, pp. 4539-4551, Sept. 2014, doi: 10.1109/TIE.2013.2288211.
Year 2022, Volume: 7 Issue: 2, 99 - 112, 31.12.2022

Abstract

References

  • [1] Özçelik, M. A. & Aycan, A. Manyetik Olarak Etkileşen Bobinlerin Alternatif ve Doğru Akımda İncelenmesi . Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 20 (4) , 172-180, 2017. DOI: 10.17780/ksujes.356588
  • [2] M. Sahin , "Endüktans Seçim Kriteri ve Güç Elektroniği Uygulamaları için Tasarım Aşamaları", Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, c. 24, sayı. 3, ss. 689-695, Ara. 2020, doi:10.19113/sdufenbed.543986
  • [3] J. Kim and Y. -J. Park, "Approximate Closed-Form Formula for Calculating Ohmic Resistance in Coils of Parallel Round Wires With Unequal Pitches," in IEEE Transactions on Industrial Electronics, vol. 62, no. 6, pp. 3482-3489, June 2015, doi: 10.1109/TIE.2014.2370943
  • [4] H. -I. Du, S. -O. Heo, T. -M. Kim, B. -S. Han, J. -H. Lee and S. -C. Yang, "Effect on Current-Limiting Performance of Combining Condition YBCO Thin-Film Wire Having Different Stabilization Layer With Superconducting Fault Current Limiter Using Iron Core and Coils," in IEEE Transactions on Applied Superconductivity, vol. 24, no. 3, pp. 1-5, June 2014, Art no. 5601705, doi: 10.1109/TASC.2013.2295687.
  • [5] M. Milgrāvis, A. Bojarevičs, A. Gaile and V. Geža, "Design of a System to Compose 50 Hz Alternating and Static Magnetic Field From Induction Coil and Permanent Magnets," in IEEE Magnetics Letters, vol. 11, pp. 1-4, 2020, Art no. 2104704, doi: 10.1109/LMAG.2020.3021364.
  • [6] H. J. Lee et al., "The AC Loss Measurement of the KSTAR PF1 Coils During the First Commissioning," in IEEE Transactions on Applied Superconductivity, vol. 20, no. 3, pp. 551-555, June 2010, doi: 10.1109/TASC.2010.2040264.
  • [7] O. Tikhonova, I. Malygin and A. Plastun, "Calculation of Inductive Resistances of Induction Motor with Ring Windings by “ANSYS Maxwell”," 2018 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM), 2018, pp. 1-4, doi: 10.1109/ICIEAM.2018.8728767.
  • [8] Y. Nikulshin, Y. Wolfus, A. Friedman and Y. Yeshurun, "Improving the Performance of Saturated Cores Fault Current Limiters by Varying Winding Density in the AC Coils," in IEEE Transactions on Applied Superconductivity, vol. 25, no. 3, pp. 1-5, June 2015, Art no. 5602705,
  • [9] D. Mayer, "Inductance of Coil in Nonhomogenous Surrounding," in IEEE Transactions on Magnetics, vol. 45, no. 3, pp. 1032-1035, March 2009, doi: 10.1109/TMAG.2009.2012564.
  • [10] D. M. Sousa and G. D. Marques, "Study of the air gap magnetic field distribution of a nuclear magnetic resonance iron-core magnet," 2008 IEEE Region 8 International Conference on Computational Technologies in Electrical and Electronics Engineering, 2008, pp. 242-247, doi: 10.1109/SIBIRCON.2008.4602640.
  • [11] S. Cho, H. -C. Liu, H. Ahn, J. Lee and H. -W. Lee, "Eddy Current Brake With a Two-Layer Structure: Calculation and Characterization of Braking Performance," in IEEE Transactions on Magnetics, vol. 53, no. 11, pp. 1-5, Nov. 2017, Art no. 8110205, doi: 10.1109/TMAG.2017.2707555.
  • [12] R. Ni, G. Wang, X. Gui and D. Xu, "Investigation of d- and q-Axis Inductances Influenced by Slot-Pole Combinations Based on Axial Flux Permanent-Magnet Machines," in IEEE Transactions on Industrial Electronics, vol. 61, no. 9, pp. 4539-4551, Sept. 2014, doi: 10.1109/TIE.2013.2288211.
There are 12 citations in total.

Details

Primary Language English
Journal Section Research Article
Authors

Mehmet Ali Özçelik 0000-0003-0984-5707

Ahmet Aycan 0000-0001-9915-9465

Publication Date December 31, 2022
Acceptance Date December 15, 2022
Published in Issue Year 2022 Volume: 7 Issue: 2

Cite

APA Özçelik, M. A., & Aycan, A. (2022). INVESTIGATION OF THE CHANGE INDUCTANCE OF A COIL AS AIR-IRON-SILICON STEEL AND ALUMINUM CORES. The International Journal of Energy and Engineering Sciences, 7(2), 99-112.

IMPORTANT NOTES

No part of the material protected by this copyright may be reproduced or utilized in any form or by any means, without the prior written permission of the copyright owners, unless the use is a fair dealing for the purpose of private study, research or review. The authors reserve the right that their material can be used for purely educational and research purposes. All the authors are responsible for the originality and plagiarism, multiple publication, disclosure and conflicts of interest and fundamental errors in the published works.

*Please note that  All the authors are responsible for the originality and plagiarism, multiple publication, disclosure and conflicts of interest and fundamental errors in the published works. Author(s) submitting a manuscript for publication in IJEES also accept that the manuscript may go through screening for plagiarism check using IThenticate software. For experimental works involving animals, approvals from relevant ethics committee should have been obtained beforehand assuring that the experiment was conducted according to relevant national or international guidelines on care and use of laboratory animals.  Authors may be requested to provide evidence to this end.
 
**Authors are highly recommended to obey the IJEES policies regarding copyrights/Licensing and ethics before submitting their manuscripts.


Copyright © 2024. AA. All rights reserved