Utilization of Bio-waste Mussel Shell as a Decoration Material on LiCoO2 Cathode

Year 2023, , 17 - 25, 26.12.2023

Mehmet Emre Çetintasoglu , Nuray Çağlar , Özgül Keleş

https://doi.org/10.30897/ijegeo.1367737

Abstract

In this study, thermochemical conversion of mussel shells as biological waste utilizations has been made as a protection layer for cathode active materials. LiCoO2 material synthesized via sol-gel method and coated with CaO produced using mussel shells. An appropriate coating ratio enhances the cycling performance with a better specific capacity (170 mAh g-1 at 1C). Surface modification plays a crucial role in attaining an improved performance of LCO by reducing its interference between electrolytes. This study present the use of biological waste mussel shell as decoration agent for cathode active materials and lead up to decrease the amount of biological wastes.

Keywords

Mussel shell, CaO, Lithium-ion batteries, Biomaterials, waste to energy

Supporting Institution

Scientific Research Projects Unit of Istanbul University

Project Number

FDK-2019-35177

Thanks

The authors thank Scientific Research Projects Unit of Istanbul University for their supports to FDK-2019-35177 numbered project about this study.

References

• Bai, Y., Yin, Y., Liu, N., Guo, B., Shi, H., Liu, J., Chen, L. (2007). New concept of surface modification to LiCoO2. Journal of power sources, 174(1), 328-334.
• Chen, G., Geng, H., Wang, Z., Yang, R., Xu, Y. (2016). On electrochemistry of Al2O3-coated LiCoO2 composite cathode with improved cycle stability. Ionics, 22, 629-636.
• Chen, Y., Zhang, Y., Wang, F., Wang, Z., & Zhang, Q. (2014). Improve the structure and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode material by nano-Al2O3 ultrasonic coating. Journal of Alloys and Compounds, 611, 135-141.
• Chen, Z., Lu, Z., Dahn, J. R. (2002). Staging phase transitions in LixCoO2. Journal of the Electrochemical Society, 149(12), A1604.
• Duh, Y. S., Sun, Y., Lin, X., Zheng, J., Wang, M., Wang, Y., Yu, G. (2021). Characterization on thermal runaway of commercial 18650 lithium-ion batteries used in electric vehicles: A review. Journal of Energy Storage, 41, 102888.
• He, P., Yu, H., & Zhou, H. (2012). Layered lithium transition metal oxide cathodes towards high energy lithium-ion batteries. Journal of Materials Chemistry, 22(9), 3680-3695.
• Hu, X., Yang, W., Jiang, Z., Huang, Z., Wang, Y., Wang, S. (2021). Improving diffusion kinetics and phase stability of LiCoO2 via surface modification at elevated voltage. Electrochimica Acta, 380, 138227.
• Hussein, A. I., Ab-Ghani, Z., Che Mat, A. N., Ab Ghani, N. A., Husein, A., Ab. Rahman, I. (2020). Synthesis and characterization of spherical calcium carbonate nanoparticles derived from cockle shells. Applied Sciences, 10(20), 7170.
• Jadhav, V., Bhagare, A., Wahab, S., Lokhande, D., Vaidya, C., Dhayagude, A., Dutta, M. (2022). Green synthesized calcium oxide nanoparticles (CaO NPs) using leaves aqueous extract of moringa oleifera and evaluation of their antibacterial activities. Journal of Nanomaterials, 2022, 1-7.
• Jian, Z., Wang, W., Wang, M., Wang, Y., AuYeung, N., Liu, M., Feng, Z. (2018). Al2O3 coated LiCoO2 as cathode for high-capacity and long-cycling Li-ion batteries. Chinese Chemical Letters, 29(12), 1768-1772.
• Johnston, W. D., Heikes, R. R., Sestrich, D. (1958). The preparation, crystallography, and magnetic properties of the LixCo(1− x)O system. Journal of Physics and Chemistry of Solids, 7(1), 1-13.
• Kaur, G., Gates, B. D. (2022). Surface Coatings for Cathodes in Lithium Ion Batteries: From Crystal Structures to Electrochemical Performance. Journal of The Electrochemical Society, 169(4), 043504.
• Kochan, C. (2020). An experimental investigation on mode-I fracture toughness of mussel shell/epoxy particle reinforced composites. Pamukkale Universitesi Muhendislik Bilimleri Dergisi, 26(4), 599-604.
• Li, M., Lu, J. (2020). Cobalt in lithium-ion batteries. Science, 367(6481), 979-980.
• Lin, J., Wu, J., Fan, E., Zhang, X., Chen, R., Wu, F., Li, L. (2022). Environmental and economic assessment of structural repair technologies for spent lithium-ion battery cathode materials. International Journal of Minerals, Metallurgy and Materials, 29(5), 942-952.
• Margaretha, Y. Y., Prastyo, H. S., Ayucitra, A., Ismadji, S. (2012). Calcium oxide from Pomacea sp. Shell as a catalyst for biodiesel production. International Journal of Environmental Engineering, 3, 33–41.
• Ong, S. P., Chevrier, V. L., Hautier, G., Jain, A., Moore, C., Kim, S., Ceder, G. (2011). Voltage, stability and diffusion barrier differences between sodium-ion and lithium-ion intercalation materials. Energy & Environmental Science, 4(9), 3680-3688.
• Radin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Van der Ven, A. (2017). Narrowing the gap between theoretical and practical capacities in Li‐ion layered oxide cathode materials. Advanced Energy Materials, 7(20), 1602888.
• Reimers, J. N., Dahn, J. R. (1992). Electrochemical and in situ X‐ray diffraction studies of lithium intercalation in LixCoO2. Journal of the Electrochemical Society, 139(8), 2091.
• Shen, B., Zuo, P., Li, Q., He, X., Yin, G., Ma, Y., Gao, Y. (2017). Lithium cobalt oxides functionalized by conductive Al-doped ZnO coating as cathode for high-performance lithium ion batteries. Electrochimica Acta, 224, 96-104.
• Srichanachaichok, W., Pissuwan, D. (2023). Micro/Nano Structural Investigation and Characterization of Mussel Shell Waste in Thailand as a Feasible Bioresource of CaO. Materials, 16(2), 805.
• Takamatsu, D., Mori, S., Orikasa, Y., Nakatsutsumi, T., Koyama, Y., Tanida, H., Ogumi, Z. (2013). Effects of ZrO2 coating on LiCoO2 thin-film electrode studied by in situ X-ray absorption spectroscopy. Journal of The Electrochemical Society, 160(5), A3054.
• Verdier, S., El Ouatani, L., Dedryvère, R., Bonhomme, F., Biensan, P., Gonbeau, D. (2007). XPS study on Al2O3-and AlPO4-coated LiCoO2 cathode material for high-capacity Li ion batteries. Journal of The Electrochemical Society, 154(12), A1088.
• Wang, G. X., Yang, L., Chen, Y., Wang, J. Z., Bewlay, S., Liu, H. K. (2005). An investigation of polypyrrole-LiFePO4 composite cathode materials for lithium-ion batteries. Electrochimica Acta, 50(24), 4649-4654.
• Xia, H., Lu, L., Meng, Y. S., Ceder, G. (2007). Phase transitions and high-voltage electrochemical behavior of LiCoO2 thin films grown by pulsed laser deposition. Journal of The Electrochemical Society, 154(4), A337.
• Xiao, B., Wang, P. B., He, Z. J., Yang, Z., Tang, L. B., An, C. S., Zheng, J. C. (2019). Effect of MgO and TiO2 Coating on the Electrochemical Performance of Li‐Rich Cathode Materials for Lithium‐Ion Batteries. Energy Technology, 7(8), 1800829.
• Yu, X., Manthiram, A. (2018). Electrode–electrolyte interfaces in lithium-based batteries. Energy & Environmental Science, 11(3), 527-543.
• Zhao, J., Wang, L., He, X., Wan, C., Jiang, C. (2010). Kinetic investigation of LiCoO2 by electrochemical impedance spectroscopy (EIS). International Journal of Electrochemical Science, 5(4), 478-488.
• Zhao, S., Zhang, W., Li, G., Zhu, H., Huang, J., He, W. (2020). Ultrasonic renovating and coating modifying spent lithium cobalt oxide from the cathode for the recovery and sustainable utilization of lithium-ion battery. Journal of Cleaner Production, 257, 120510.
• Zhou, A., Xu, J., Dai, X., Yang, B., Lu, Y., Wang, L., Li, J. (2016). Improved high-voltage and high-temperature electrochemical performances of LiCoO2 cathode by electrode sputter-coating with Li3PO4. Journal of Power Sources, 322, 10-16.