The Effect of UAV Usage on Detail Points in Cadastre Update Studies: Çorum-Karaköy Case Study

Year 2020, , 140 - 146, 15.08.2020

Kamil Karataş , Nurgül Seher Altınışık

https://doi.org/10.30897/ijegeo.646155

Cited By: 2

Abstract

In Turkey, cadastral studies to determine the
position, areas, and legal status of the real estate parcels have been carried
out for a period of approximately 100 years by various laws, measurement
methods, measurement instruments, and substrates. In Turkey, it is necessary to
update 40% of the existing parcels because of problems such as produced cadastral
substrates that do not reflect the ground structure, inadequate standards for
technical reasons, and insufficient spatial data for the establishment of
systems. The technical part of the studies for the cadastral update is carried
out by the use of modern measurement methods and advanced technological
devices, with the contribution of the private sector by the tender procedure.
The unmanned aerial vehicle (UAV), which is one of the technological devices,
can provide three-dimensional appearance and accuracy, the ability to interpret
the land, and time reduction in the studies for cadastral updates. In this
study, the contribution of data obtained by a UAV to the detailed studies was
investigated for 56 parcels on a cadastral island that has an area of 24.71 ha
for the renewal of cadastral parcels related to Karaköy Village of Çorum
Province, Osmancık District. The number of detail points determined by the
classical method was 392, while the number of detail points determined by the
UAV was 682.

Keywords

Cadastre, Cadastre Update, UAV

Thanks

I would like to thank following people: Survey Engineer Hakan KÜRKLÜ of the Çorum Cadastre Directorate; Survey Engineer Ismail YELMENOĞLU, the owner of ASBEY Map İmar Trade. Co. Ltd.; and Survey Engineer Ali HARARCI, the owner of the APEK Map İmar Trade. Co. Ltd.

References

• Atak, B, (2018). İnsansız hava aracı yardımıyla kadastral harita üretiminin incelenmesi (Yüksek Lisans Tezi). Necmettin Erbakan Üniversitesi, Konya, Türkiye.
• Blyenburgh Van, P. (1999). “UAVs: and Overview, In: Air & Space Europe”, I, 5(6), 43-47.
• Erenoğlu, R.C., Erenoğlu O. (2018). A case study on the comparison of terrestrial methods and unmanned aerial vehicle technique in landslide surveys: Sarıcaeli landslide, Çanakkale, NW Turkey. International Journal of -Environment and Geoinformatics (IJEGEO), 5(3), 325-336.
• Lee, G., Choi, M., Yu, W., & Jung, K. (2019). Creation of river terrain data using region growing method based on point cloud data from UAV photography. Quaternary International.
• Mirdan, O., Yakar, M. (2017). Tarihi Eserlerin İnsansız Hava Aracı İle Modellenmesinde Karşılaşılan Sorunlar. Geomatik, 2(3), 118-125.
• Nacar, F, (2015). Investigation of the availability of cadastral renovation work in high-resolution satellite images and orthophotos in Turkey, (PhD thesis). Selçuk Üniversitesi, Konya, Turkey.
• Pelegrina, M., A Canal, M., Julião, R. P. S. P. M., Kolosinski Obal, K. (2016). Atualização cadastral dirigida, utilizando ortofotos oriundas de Vant. Actas I Seminário Internacional UAV, 129-132.
• Şahin, İ., Yakar, M. (2007). Farklı Kaynaklardan Elde Edilen Sayısal Yükseklik Modellerinin Ortofoto Doğruluğuna Etkilerinin Araştırılması.
• Sarı, İ, N., Demirel, Z. (2007). Ülkemiz Kadastrosunda Yenileme Olgusu ve Önerileri, Jeodezi, Jeoinformasyon ve Arazi Yönetimi Dergisi, 1(96), 13-21.
• Saripalli, S., Montgomery, J. F., Sukhatme, G. S. (2003). Visually Guided Landing Of An Unmanned Aerial Vehicle. Robotics and Automation, IEEE Transactions on, 19(3), 371-380.
• Uçakcıoğlu, E, (2008) Kadastro Paftalarının Yenilenmesi Üzerine Bir İnceleme, (Yüksek Lisans Tezi). Afyon Kocatepe Üniversitesi, Afyon, Türkiye.
• Yakar, M., Toprak, A. S., Ulvi, A., Uysal, M. (2015). Konya Beyşehir Bezariye Hanının (Bedesten) İHA İle Fotogrametrik Teknik Kullanılarak Üç Boyutlu Modellenmesi. Türkiye Harita Bilimsel ve Teknik Kurultayı, Ankara, Turkey.
• Yücel, F, (2018) Kadastrodaki Yenileme Çalışmalarının Farklı Kadastral Teknik ve Mevzuat Uygulamalarıyla Karşılaştırılarak İncelenmesi, (Yüksek Lisans Tezi). Zonguldak Bülent Ecevit Üniversitesi, Zonguldak, Türkiye.