Abstract
Günümüz dünyasında kullanımı gün geçtikçe artan açık kaynak kodlu yazılımlar, endüstride olduğu gibi eğitim alanında da sıklıkla kullanılmaktadır. Kolayca erişilebilmesi, kullanıcılar tarafından sürekli geliştirilmesi ve kullanım kolaylığı gibi sebepler açık kaynak kodlu yazılımları eğitim alanında tercih edilen bir unsur olarak öne çıkarmaktadır. Bu çalışmada, açık kaynak kodlu
FREECAD yazılımı kullanılarak, çeşitli mühendislik ve önlisans programlarında bulunan Bilgisayar Destekli Teknik Tasarım dersi için bir müfredat önerisi hazırlanmıştır. Hazırlanan müfredat önerisi ve müfredatın FREECAD de kullanımı incelendiğinde, yazılımın eğitim kurumlarında da rahatlıkla kullanılabilir olduğu görülmektedir.
References
- GNU General Public Licence Version 3. Free Software Foundation. URL: https://www.gnu.org/licenses/gpl-3.0.html
- Pearce , J. M., Blair, C. M., Laciak, K. J., Andrews, R., Nosrat, A., Zelenika-Zovko, I. “3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development “, Journal of Sustainable Development Vol. 3, No. 4; December 2010
- Junk, S., Kuen, C.. “Review of Open Source and Freeware CAD Systems for Use with 3D- Printing” Procedia CIRP Volume 50, 2016, Pages 430-435
- Fang-Yu, S., Jen-Chin, Tsai., Morton, D., Wei-Shao, Lin.”Use of an open-source CAD software program and additive manufacturing technology to design and fabricate a definitive cast for retrofitting a crown to an existing removable partial denture” Journal of Prosthetic Dentistry April 2019
- Vasques, M. T., Mori, M., Lagana, D. C.”Three-dimensional printing of occlusal devices for temporomandibular disorders by using a free CAD software program: A technical report “ Journal of Prosthetic Dentistry June 2019
- Tachibana, K., Oka, K. “Design of small electric generator by free CAD and analysis software” The 20th MAGDA Conference in Pacific Asia, November 14-16, 2011, Kaohsiung, Taiwan
- Jin-Yang, L., Long, G., Hu-Shan, X., Korepanova, N., Wei, J., Xin, S., Yan-Lei, Z., Rui, Yu. “FreeCAD based modeling study on MCNPX for accelerator driven system”Progress in Nuclear Energy Volume 107, August 2018, Pages 100-109
- Robertson, D., Allen, T, J. “CAD System Use and Engineering Performance in Mechanical Design “ Massachusetts Institute of Technology January 1991
- Balan, L., Timber, Y., Mehrtash, M. “Problem-Based Learning Strategy for CAD Software Using Free-Choice and Open-Ended Group Projects “ Procedia Manifacturing Volume 32, 2019, Pages 339-347
- Di Angelo, P., Leali, F., Di Stefano, P. “Can Open-Source 3D Mechanical CAD Systems Effectively Support University Courses? “ International Journal of Engineering Education May 2016
Abstract
In today's world, the use of open source software, which is increasing day by day, is frequently used in education as well as in industry. Reasons such as easy accessibility, continuous development by users and ease of use make open source software a preferred element in the field of education. In this study, a curriculum proposal was prepared for the Computer Aided Technical Design course in various engineering and associate degree programs using the open source FREECAD software. When the curriculum proposal prepared and the use of the curriculum in FREECAD are examined, it is seen that the software can be easily used in educational institutions.
References
- GNU General Public Licence Version 3. Free Software Foundation. URL: https://www.gnu.org/licenses/gpl-3.0.html
- Pearce , J. M., Blair, C. M., Laciak, K. J., Andrews, R., Nosrat, A., Zelenika-Zovko, I. “3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development “, Journal of Sustainable Development Vol. 3, No. 4; December 2010
- Junk, S., Kuen, C.. “Review of Open Source and Freeware CAD Systems for Use with 3D- Printing” Procedia CIRP Volume 50, 2016, Pages 430-435
- Fang-Yu, S., Jen-Chin, Tsai., Morton, D., Wei-Shao, Lin.”Use of an open-source CAD software program and additive manufacturing technology to design and fabricate a definitive cast for retrofitting a crown to an existing removable partial denture” Journal of Prosthetic Dentistry April 2019
- Vasques, M. T., Mori, M., Lagana, D. C.”Three-dimensional printing of occlusal devices for temporomandibular disorders by using a free CAD software program: A technical report “ Journal of Prosthetic Dentistry June 2019
- Tachibana, K., Oka, K. “Design of small electric generator by free CAD and analysis software” The 20th MAGDA Conference in Pacific Asia, November 14-16, 2011, Kaohsiung, Taiwan
- Jin-Yang, L., Long, G., Hu-Shan, X., Korepanova, N., Wei, J., Xin, S., Yan-Lei, Z., Rui, Yu. “FreeCAD based modeling study on MCNPX for accelerator driven system”Progress in Nuclear Energy Volume 107, August 2018, Pages 100-109
- Robertson, D., Allen, T, J. “CAD System Use and Engineering Performance in Mechanical Design “ Massachusetts Institute of Technology January 1991
- Balan, L., Timber, Y., Mehrtash, M. “Problem-Based Learning Strategy for CAD Software Using Free-Choice and Open-Ended Group Projects “ Procedia Manifacturing Volume 32, 2019, Pages 339-347
- Di Angelo, P., Leali, F., Di Stefano, P. “Can Open-Source 3D Mechanical CAD Systems Effectively Support University Courses? “ International Journal of Engineering Education May 2016
Details
| Primary Language | Turkish |
|---|---|
| Subjects | Engineering |
| Journal Section | Articles |
| Authors | |
| Publication Date | April 30, 2021 |
| Submission Date | February 7, 2021 |
| Acceptance Date | February 17, 2021 |
| Published in Issue | Year 2021 |
Bu eser Creative Commons Atıf-GayriTicari 4.0 Uluslararası Lisansı ile lisanslanmıştır.