Maximization of Flight Performance of Eight-Rotor Multirotor with Differentiated Hub Angle

Year 2024, Volume: 8 Issue: 3, 206 - 213, 22.10.2024

Enes Özen , Tuğrul Oktay

https://doi.org/10.30518/jav.1490356

Abstract

The aim of this article is to design a rotary wing aircraft autopilot system that improves flight performance by changing the body shape during flight. The method is to obtain values that stabilize the longitudinal and lateral flight of the aircraft, where the amount of metamorphosis and Proportional-Integral-Derivative (PID) coefficients are determined using the simultaneous perturbation stochastic approximation (SPSA) optimization algorithm. The rotary wing aircraft has a deformable structure with eight rotors. Shape-changing rotary-wing aircraft are aircraft that can fly with the lift generated by propellers. Aerial platform; It consists of arms and trunk. The angle between mechanism A and the arm to which the rotors are connected can be changed with the horizontal plane and different configurations are obtained. When the angle between the arms is 45°, the octo configuration turns into a stable structure, while when the angle between the arms is 0°, the X8 configuration provides high maneuverability and increased controllability. Metamorphosis, its effect on longitudinal and lateral flight stability and improvement studies were carried out in a simulation environment and the results are presented in this study. As a result of the shape change, longitudinal and lateral narrowing occurred by 26.8° percent. Simulation tests were modeled in a closed environment, free from atmospheric effects. The obtained flight performance values are presented in Tables.

Keywords

Morphing Multirotor, PID, SPSA, Flight Performance

References

• Alanezi, M.A., Haruna, Z.; Sha’aban, Y.A., Bouchekara, H.R.E.H., Nahas, M., Shahriar, M.S. (2022). Obstacle Avoidance-Based Autonomous Navigation of a Quadrotor System. Drones 6, 288.
• Bao, X., Niu, Y., Li, Y., Mao, J., Li, S., Ma, X., Yin, Q., Chen, B. (2022). Design and Kinematic Analysis of Cable-Driven Target Spray Robot for Citrus Orchards. MPDI/Appl. Sci., 12, 9379.
• Chen, S., Zhou, W., Yang, A.-S., Chen, H., Li, B., Wen, C.Y. (2022). An End-to-End UAV Simulation Platform for Visual SLAM and Navigation. MPDI/Aerospace, 9, 48.
• Coban, S., Bilgic, H., Akan, E. (2020). Improving Autonomous Performance of a Passive Morphing Fixed Wing UAV. Information Technology and Control, 49(1), 28-35.
• Desbines, A., Expert, F., Boyron, M., Diperi, J., Viollet,S., Ruffier, F. (2017). X-Morf: A crash-separable quadrotor that morfs its X-geometry in flight. 2017 Workshop on Research, Education and Development of Unmanned Aerial Systems (RED UAS).
• Fabris, A., Kleber, K.D., Falanga and Scaramuzza, D. (2012). Geometry-aware Compensation Scheme for Morphing Drones, 2021 IEEE International Conference on Robotics and Automation (ICRA), Xi'an, China, pp. 592-598.
• Falanga, D., Kleber, K., Mintchev, S., Floreano, D., Scaramuzza, D. (2018). The Foldable Drone: A Morphing Quadrotor that can Squeeze and Fly. IEEE Robotics and Automation Letters. Preprint Version. Accepted November.
• Husain, Z., Al Zaabi, A., Hildmann, H., Saffre, F., Ruta, D., Isakovic, A.F. (2022). Search and Rescue in a Maze-like Environment with Ant and Dijkstra Algorithms. MPDI/Drones, 6, 273.
• Köse, O., (2023). Yapay Sinir Ağları, PID ve Başkalaşım ile Octorotor Yanal Uçuş Kontrolü . 4th International Black Sea Modern Scientific Research Congress (pp.79-90). Rize, Turkey
• Köse, O., Oktay, T. (2019). Dynamic Modeling and Simulation of Quadrotor for Different Flight Conditions European Journal of Science and Technology, no. 15, pp. 132-142.
• Köse, O., Oktay, T. (2021). Morphing with SPSA and ANN. Intelligent Systems and Applications in Engineering. Ijisae, 9(4), 159–164.
• Oktay T., Uzun M., Çelik H., Konar M. (2017). Pid Based Hierarchical Autonomous System Performance Maximization of a Hybrid Unmanned Aerial Vehicle (Huav). Anadolu Univ. J. of Sci. and Technology A – Appl. Sci. and Eng. 18 (3)
• Oktay, T., Sal, F. (2016). Combined passive and active helicopter main rotor morphing for helicopter energy save. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38(6), 1511-1525.
• Şahin, H., Kose, O. and Oktay, T. (2022). Simultaneous autonomous system and powerplant design for morphing quadrotors, Aircraft Engineering and Aerospace Technology, Vol. 94 No. 8, pp. 1228-1241
• Uzun, M., Özdemir, M., Yıldırım, Ç.V., Çoban, S. (2021). A Novel Biomimetic Wing Design and Optimizing Aerodynamic Performance. Journal of Aviation, 6(1), 12-25.
• Zhang, Z., Li, X., Wang, X., Zhou, X., An, J., Li, Y. (2022). TDE-Based Adaptive Integral Sliding Mode Control of Space Manipulator for Space-Debris Active Removal. MPDI/Aerospace, 9, 105.