Research Article
BibTex RIS Cite

DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS

Year 2018, Volume: 6 Issue: 3, 460 - 463, 28.09.2018
https://doi.org/10.21923/jesd.422598

Abstract

Orthosis is a 3D material that supports the deformed field. These orthotic materials are used to help weak muscle function, to support muscles and joints, to correct posture, to continue to work despite unbalanced movements, and to heal fractures. Upper and lower extremity orthosis practices are available. Upper limb orthosis; shoulder, elbow, wrist, hand or fingers. Prevents or supports unwanted movements. There are various upper extremity orthoses called fingers, hand splints, hand and wrist atrophy, elbow orthosis, shoulder orthosis according to the region where they are practiced. Orthoses applied to the hand and arm are usually provided for short-term use. Nowadays, with the new generation of the industrial orthosis and 3D designs, the treatment of deformity has become possible by using simulation techniques on the biomechanical data. The purpose of this study is to discuss the advantage of the 3-dimensional PLA-based finger-tipped orthosis on the individual's superiority against other conventional methods and designs in the treatment of upper limb finger conservative treatment.

References

  • Referans1 Jarvik JG, Dalinka MK, 1991. Kneeland JB. Hand injuries in adults. Semin Roentgenol. 26, 282-299.
  • Referans2 Smith ME, Auchincloss JM, Ali MS., 1985. Causes and consequences of hand injury, J Hand Surg, 10, 288-292.
  • Referans3 Sorock GS, Lombardi DA, Hauser RB, Eisen EA., 2002. Acute traumatic occupational hand injuries: Type, location, and, severity. J Occup Environ Med. 44, 345-351.
  • Referans3 Jackson LL., 2001. Non-fatal occupational injuries and illnesses treated in hospital emergency department in the United States. Inj Prev. 7, 121-126.
  • Referans4 Pettengill K M, van Strein G., 2002. Postoperative management of flexor tendon injuries. In: Hunter M, Rehabilitation of the hand and upper extremity 5th ed St Louis, Missouri, Mosby. 431-456.
  • Referans5 Lister G.D. Flexor tendon. In JG. Me Carthy ed., 1990. Plastic Surgery. Vol: 7, pp:. Philadelphia, W.B. Saunders. 7, 4516-4564.
  • Referans6 Wren T.A.L, Yerby .S.A, Beaupre G.S, Carter D.R., 2001. Mechanical properties of human Achilles tendon. Clin. Biomech. 16, 245-251.
  • Referans7 Zhang A.Y, Chang J., 2003. Tissue engineering of flexor tendons. Clin. Plastic. Surg. 30, 565-572.
  • Referans8 Bredjiklian P.K., 2003. Biologic aspects of flexor tendon laceration and repair. J. Bone Joint Surg. 85A, 539 549.
  • Referans9 Gerwin M. Cerabral palsy. In D.P. Green, R.N. Hotchkiss, W.C. Pederson (eds), 1999. third ed. Green's Operative Hand Surgery. New York, Churchill Livingsteone. 1, 259-286.
  • Referans10 Vulpius O., Strofel A., 1911. In Enke Ferdinand ed. Orthopadische Operatlonslehre, Stuttgart. 29-30.
  • Referans11 Baker L.D., 1954. Triceps surae syndrome in cerebral palsy: an operation to aid its lelief. Arch Surg. 68: 216-221.
  • Referans12 Bunnell. S., 1918. Repair of tendons in the fingers and two new instruments. Surg. Gynocol. Obstet. 10, 103-110.
  • Referans13 Kessler, I., 1961. Primary repair without immobilization of flexor tendon division within the digital sheet. Acta, Orth. Scan. 40, 587-601.

PLA TABANLI ÜST EKSTREMITE PARMAK ORTEZI 3 BOYUTLU TASARIMI VE BASKISI

Year 2018, Volume: 6 Issue: 3, 460 - 463, 28.09.2018
https://doi.org/10.21923/jesd.422598

Abstract

Ortez, deformite olmuş bölgeyi destekleyen 3 boyutlu
bir malzemedir. Bu ortez malzemeler, zayıf bir kas işlevine yardımcı olmak,
kasları ve eklemleri desteklemek, duruşu düzeltmek, dengesiz hareketlere rağmen
çalışmaya devam etmek ve kırıkları iyileştirmek için kullanılır. Üst ve alt
ekstemite ortez uygulamaları mevcuttur. Üst ekstremite ortezi; omuz, dirsek,
bilek, el veya parmaklar için uygulanır. İstenmeyen hareketleri önler veya
destekler. Uygulandığı bölgeye göre parmak ateli, el splinti, el ve bilek
atrofisi, dirsek ortezi, omuz ortezi olarak adlandırılan çeşitli üst ekstremite
ortezleri vardır. Genellikle kısa süreli kullanım için el ve kola uygulanan
ortezler öngörülmüştür. Günümüzde, endüstriyel yeni jenerasyon ortezi ile 3
boyutlu tasarımlarla kişiye özel biyomekanik veriler üzerinden simülasyon
teknolojileri kullanılarak deformitenin tedavisi mümkün hale gelmiştir. Bu
çalışmanın amacı, üst ekstremite parmak konservatif tedavisinde kişiye özel 3
boyutlu PLA tabanlı parmak ateli ortezi tekniğinin diğer sitatik yöntem ve
tasarımlara karşı avantajını tartışmaktır.

References

  • Referans1 Jarvik JG, Dalinka MK, 1991. Kneeland JB. Hand injuries in adults. Semin Roentgenol. 26, 282-299.
  • Referans2 Smith ME, Auchincloss JM, Ali MS., 1985. Causes and consequences of hand injury, J Hand Surg, 10, 288-292.
  • Referans3 Sorock GS, Lombardi DA, Hauser RB, Eisen EA., 2002. Acute traumatic occupational hand injuries: Type, location, and, severity. J Occup Environ Med. 44, 345-351.
  • Referans3 Jackson LL., 2001. Non-fatal occupational injuries and illnesses treated in hospital emergency department in the United States. Inj Prev. 7, 121-126.
  • Referans4 Pettengill K M, van Strein G., 2002. Postoperative management of flexor tendon injuries. In: Hunter M, Rehabilitation of the hand and upper extremity 5th ed St Louis, Missouri, Mosby. 431-456.
  • Referans5 Lister G.D. Flexor tendon. In JG. Me Carthy ed., 1990. Plastic Surgery. Vol: 7, pp:. Philadelphia, W.B. Saunders. 7, 4516-4564.
  • Referans6 Wren T.A.L, Yerby .S.A, Beaupre G.S, Carter D.R., 2001. Mechanical properties of human Achilles tendon. Clin. Biomech. 16, 245-251.
  • Referans7 Zhang A.Y, Chang J., 2003. Tissue engineering of flexor tendons. Clin. Plastic. Surg. 30, 565-572.
  • Referans8 Bredjiklian P.K., 2003. Biologic aspects of flexor tendon laceration and repair. J. Bone Joint Surg. 85A, 539 549.
  • Referans9 Gerwin M. Cerabral palsy. In D.P. Green, R.N. Hotchkiss, W.C. Pederson (eds), 1999. third ed. Green's Operative Hand Surgery. New York, Churchill Livingsteone. 1, 259-286.
  • Referans10 Vulpius O., Strofel A., 1911. In Enke Ferdinand ed. Orthopadische Operatlonslehre, Stuttgart. 29-30.
  • Referans11 Baker L.D., 1954. Triceps surae syndrome in cerebral palsy: an operation to aid its lelief. Arch Surg. 68: 216-221.
  • Referans12 Bunnell. S., 1918. Repair of tendons in the fingers and two new instruments. Surg. Gynocol. Obstet. 10, 103-110.
  • Referans13 Kessler, I., 1961. Primary repair without immobilization of flexor tendon division within the digital sheet. Acta, Orth. Scan. 40, 587-601.
There are 14 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Research Articles
Authors

Fatih Cıftcı 0000-0002-3062-2404

Askican Hacıoglu This is me 0000-0003-2843-4102

Taylan Baran Yesil 0000-0003-2609-2014

Cem Bülent Ustundag 0000-0002-4439-0878

Publication Date September 28, 2018
Submission Date May 10, 2018
Acceptance Date September 12, 2018
Published in Issue Year 2018 Volume: 6 Issue: 3

Cite

APA Cıftcı, F., Hacıoglu, A., Yesil, T. B., Ustundag, C. B. (2018). DESIGNED AND 3D PRINTED PLA BASED UPPER EXTREMITY FINGER ORTHOSIS. Mühendislik Bilimleri Ve Tasarım Dergisi, 6(3), 460-463. https://doi.org/10.21923/jesd.422598