In this study, a novel method for the preconcentration of of Al(III), Cu(II), Co(II), Pb(II), Mn(II), and Fe(III) in the form of their hematoxylin chelates using a column filled with Amberlite XAD-16 resin was proposed. Metal chelates collected on the resin were eluted by 1 mol/L nitric acid in acetone and determined by flame atomic absorption spectrometry (FAAS). The influences of some analytical parameters including pH, flow rates, sample volume, the type and concentration of eluent on the preconcentration efficiency were examined. Effects of some interfering ions on the recovery values of analytes were also investigated. While optimum pH value was 8.5 for Cu(II), Co(II), Mn(II), and Fe(III) ions, it was 6.5 for Al(III) and Pb(II) ions. Appropriate eluent for quantitative elution was 8 mL of 1 mol/L nitric acid in acetone. Sample and eluent flow rates were found to be 2 mL/min. The maximum sample volume was established by changing the sample volume from 50 mL to 2500 mL. The sample volume does not significantly affect recovery within the range of 50-2000 mL of the sample volume for the investigated metal ions. The preconcentration factor obtained was 400. Under optimized conditions, the detection limits found as concentration which is threefold of the standard deviation of the blank solution were 0.053, 0.080, 0.620, 1.310, 0.330 and 0.120 µg/L for Al(III), Cu(II), Co(II), Pb(II), Mn(II), and Fe(III) ions, respectively and the adsorption capacities for these ions were 0.47 ± 0.02, 0.81 ± 0.01, 0.66 ± 0.01, 0.58 ± 0.01, 0.91 ± 0.01, and 0.73 ± 0.02 mg/g, respectively. By using the certified reference materials, the accuracy of the method was verified. The proposed method was successfully applied to cigarette, hair, and some vegetable species.
Primary Language | English |
---|---|
Subjects | Electrochemistry |
Journal Section | Articles |
Authors | |
Publication Date | January 8, 2017 |
Submission Date | July 4, 2016 |
Published in Issue | Year 2016 Volume: 3 Issue: 3 |