The Economic Importance of Kastamonu Province in Turkish Forest Products Industry In Terms of Some Engineered Products
Abstract
In this paper it was aimed to prove and emphasise the economic importance of Kastamonu in Turkish forest products industry via some analysis and calculations. Mainly; the most common manufactured and used products in Turkey, such as: Plywood, fibreboard (MDF), particleboard and round wood were selected for this research to study. First of all: The situation in Turkey was investigated and then the situation of Kastamonu was analysed. The used data were gotten from; Food And Agriculture Organization Of The United Nations (FAOSTAT), Turkish Statistical Institute (TURKSTAT & TUIK), The Union of Chambers and Commodity Exchanges of Turkey (TOBB) and Turkish Exporters Assembly (TIM). For an easy understanding, the results were shown on tables and figures. At the conclusions section our suggestions were given.
References
- Akgül, M., Çamlibel, O. (2008). Manufacture of medium density fiberboard (MDF) panels from rhododendron (R. ponticum L.) biomass. Building and doi:10.1016/j.buildenv.2007.01.003 43(4), 438–443.
- Anonymous. Particleboard-from start to Şnish. National Particleboard Association, Gaithersburg, 1996.
- Bal, B. C., Bektas, I. (2013). Some mechanical properties of plywood produced from eucalyptus, beech and poplar veneer.
- Eltawahni, H. a., Rossini, N. S., Dassisti, M., Alrashed, K., Aldaham, T. a., Benyounis, K. Y., Olabi, a. G. (2013). Evalaution and optimization of laser cutting parameters for plywood materials. Optics and Lasers in Engineering, 51(9), 1029– 1043. doi:10.1016/j.optlaseng.2013.02.019
- Food and Agriculture Organization of The United Nations Statistics Division Database, (2014).
- Král, P., Klímek, P., Mishra, P. K., Rademacher, P., Wimmer, R. (2014). Preparation and characterization of cork layered composite Plywood Boards, 9(2), 1977–1985.
- Nemli, G., Hızıroglu, S., Serin, H., Akyüz, K. C., Akyüz, I., Toksoy, D. (2007). A perspective from furniture and cabinet manufacturers in Turkey. Building and Environment, 42(4), 1699– 1706. doi:10.1016/j.buildenv.2006.01.007
- Nemli, G., Örs, Y., Kalaycıoğlu, H. (2005). The choosing of suitable decorative surface coating material types for interior end use applications of particleboard. Construction and Building doi:10.1016/j.conbuildmat.2004.07.015 19(4), 307–312.
- Orman ve Su İşleri Bakanlığı, (2012). Türkiye orman varlığı, Ankara.
- Türkiye İhracatçılar Meclisi, İhracat Rakamları (2014).
- Türkiye İstatistik Kurumu Veritabanı, (2014).
- Türkiye Odalar ve Borsalar Birliği, Bilgi Hizmetleri Dairesi, Sanayi Veritabanı, (2014).
- URL1 2014. http://kastamonu.gov.tr/nufus.asp
- Ye, X. P., Julson, J., Kuo, M., Womac, A., Myers, D. (2007). Properties of medium density fiberboards made from renewable biomass. Bioresource doi:10.1016/j.biortech.2006.04.022. 98(5), 1077–84.
Abstract
Bu çalışmada, çeşitli analizler ve hesaplamalarla Kastamonu’nun Türkiye orman ürünleri endüstrisindeki yerinin ortaya konması ve ekonomik öneminin vurgulanması amaçlanmıştır. Genel olarak, Türkiye’de en çok üretilen ve kullanılan ürünler arasında olan: Kontrplak, lif levha (MDF), yonga levha ve odun bu çalışmada araştırmak üzere seçilmiştir. İlk olarak önce Türkiye’nin sonra da Kastamonu’nun durumu analiz edilmiştir. Kullanılan veriler: Birleşmiş Milletler Gıda ve Tarım Örgütü (FAOSTAT), Türkiye İstatistik Kurumu (TUIK), Türkiye Odalar ve Borsalar Birliği (TOBB) ve Türkiye İhracatçılar Meclisi (TIM) veri tabanlarından alınmıştır. Daha kolay anlaşılması açısından sonuçlar tablolar ve şekiller ile gösterilmiştir. Sonuç bölümünde de bizlerin önerileri verilmiştir
References
- Akgül, M., Çamlibel, O. (2008). Manufacture of medium density fiberboard (MDF) panels from rhododendron (R. ponticum L.) biomass. Building and doi:10.1016/j.buildenv.2007.01.003 43(4), 438–443.
- Anonymous. Particleboard-from start to Şnish. National Particleboard Association, Gaithersburg, 1996.
- Bal, B. C., Bektas, I. (2013). Some mechanical properties of plywood produced from eucalyptus, beech and poplar veneer.
- Eltawahni, H. a., Rossini, N. S., Dassisti, M., Alrashed, K., Aldaham, T. a., Benyounis, K. Y., Olabi, a. G. (2013). Evalaution and optimization of laser cutting parameters for plywood materials. Optics and Lasers in Engineering, 51(9), 1029– 1043. doi:10.1016/j.optlaseng.2013.02.019
- Food and Agriculture Organization of The United Nations Statistics Division Database, (2014).
- Král, P., Klímek, P., Mishra, P. K., Rademacher, P., Wimmer, R. (2014). Preparation and characterization of cork layered composite Plywood Boards, 9(2), 1977–1985.
- Nemli, G., Hızıroglu, S., Serin, H., Akyüz, K. C., Akyüz, I., Toksoy, D. (2007). A perspective from furniture and cabinet manufacturers in Turkey. Building and Environment, 42(4), 1699– 1706. doi:10.1016/j.buildenv.2006.01.007
- Nemli, G., Örs, Y., Kalaycıoğlu, H. (2005). The choosing of suitable decorative surface coating material types for interior end use applications of particleboard. Construction and Building doi:10.1016/j.conbuildmat.2004.07.015 19(4), 307–312.
- Orman ve Su İşleri Bakanlığı, (2012). Türkiye orman varlığı, Ankara.
- Türkiye İhracatçılar Meclisi, İhracat Rakamları (2014).
- Türkiye İstatistik Kurumu Veritabanı, (2014).
- Türkiye Odalar ve Borsalar Birliği, Bilgi Hizmetleri Dairesi, Sanayi Veritabanı, (2014).
- URL1 2014. http://kastamonu.gov.tr/nufus.asp
- Ye, X. P., Julson, J., Kuo, M., Womac, A., Myers, D. (2007). Properties of medium density fiberboards made from renewable biomass. Bioresource doi:10.1016/j.biortech.2006.04.022. 98(5), 1077–84.
Details
| Primary Language | English |
|---|---|
| Journal Section | Articles |
| Authors | |
| Publication Date | February 5, 2015 |
| Published in Issue | Year 2015 Volume: 15 Issue: 1 |
Cite
