Influence of Planer Shavings and Waste Particleboards Usage in Core layer on Physical and Mechanical Properties of Threelayer Particleboards

Hüsnü Yel; Ayfer Dönmez Çavdar; Hülya Kalaycıoğlu; Uğur Aras

Research Article

Influence of Planer Shavings and Waste Particleboards Usage in Core layer on Physical and Mechanical Properties of Threelayer Particleboards

Year 2014, Volume: 14 Issue: 2, 215 - 221, 15.11.2014

Hüsnü Yel , Ayfer Dönmez Çavdar Hülya Kalaycıoğlu Uğur Aras

Abstract

The objective of this study is to investigate utilization of waste particleboards and planer shavings in

manufacturing three-layer particleboard panels. For this purpose, waste particleboards and planer

shavings were used in core layer of particleboard at different shelling ratios. Nine groups of three-layer

experimental boards with a target density of 0.65 g/cm3 were manufactured. Physical (thickness swelling

and water absorption) and mechanical properties (modulus of rupture, modulus of elasticity and internal

bonding strength) of the particleboards produced were determined according to EN standards. The results

have showed the mechanical properties of all the particleboards (excepted for B board group produced

from 100% waste particleboard) produced have satisfied the minimum requirements of mechanical

properties of particleboard defined in EN standards. Thickness swelling values of the experimental

particleboard for 24h water immersion were found lower than the maximum thickness swelling value of

particleboard in defined in EN standards.

Keywords

Particleboard, Waste particleboard, Planer shavings, Mechanical properties, Physical properties

References

Alma, M. H., Kalaycıoğlu, H., Bektaş, I.,Tutuş, A., 2005, Properties of cotton carpel based particleboards. Industrial Crops and Products, 22, 141–149.

Orta Tabakada Atık Yongalevha ve Planya Artıkları Kullanımının Yongalevhanın Fiziksel ve Mekanik Özellikleri Üzerine Etkisi

Year 2014, Volume: 14 Issue: 2, 215 - 221, 15.11.2014

Hüsnü Yel , Ayfer Dönmez Çavdar Hülya Kalaycıoğlu Uğur Aras

Abstract

Bu çalışmada, üç tabakalı yongalevha panellerinin üretiminde atık yongalevha ve planya artıklarının

kullanılabilirliliğinin araştırılması amaçlanmıştır. Bu amaçla, atık yongalevhalar ve planya artıkları farklı oranlarda

yongalevhanın orta tabakasında kullanılmıştır. 0.65g/cm3 hedef yoğunluğa sahip 9 farklı grupta deneme levhası

üretilmiştir. Üretilen levhaların fiziksel (su alma ve kalınlık artımı) ve mekanik (eğilme direnci, eğilmede elastikiyet

modülü ve yüzeye dik çekme direnci) özellikleri, ilgili EN standartlarına uygun olarak belirlenmiştir. Elde edilen

sonuçlara göre, %100 atık yongalevhadan üretilen levha grubu (B) hariç tüm levha gruplarının mekanik özellikleri,

EN standartlarında belirtilen minimum şartları sağladığı görülmüştür. Deneme levhalarının 24 saatlik kalınlık artımı

değerleri ise standartta belirtilen maksimum değerden daha düşük bulunmuştur.

Keywords

Yongalevha, Atık, Planya artığı, Mekanik özellikler, Fiziksel özellikle

References

Alma, M. H., Kalaycıoğlu, H., Bektaş, I.,Tutuş, A., 2005, Properties of cotton carpel based particleboards. Industrial Crops and Products, 22, 141–149.

There are 1 citations in total.

Details

Journal Section	Articles
Authors	Hüsnü Yel Ayfer Dönmez Çavdar This is me Hülya Kalaycıoğlu This is me Uğur Aras This is me
Publication Date	November 15, 2014
Published in Issue	Year 2014 Volume: 14 Issue: 2

Cite

APA	Yel, H., Dönmez Çavdar, A., Kalaycıoğlu, H., Aras, U. (2014). Influence of Planer Shavings and Waste Particleboards Usage in Core layer on Physical and Mechanical Properties of Threelayer Particleboards. Kastamonu University Journal of Forestry Faculty, 14(2), 215-221.
AMA	Yel H, Dönmez Çavdar A, Kalaycıoğlu H, Aras U. Influence of Planer Shavings and Waste Particleboards Usage in Core layer on Physical and Mechanical Properties of Threelayer Particleboards. Kastamonu University Journal of Forestry Faculty. November 2014;14(2):215-221.
Chicago	Yel, Hüsnü, Ayfer Dönmez Çavdar, Hülya Kalaycıoğlu, and Uğur Aras. “Influence of Planer Shavings and Waste Particleboards Usage in Core Layer on Physical and Mechanical Properties of Threelayer Particleboards”. Kastamonu University Journal of Forestry Faculty 14, no. 2 (November 2014): 215-21.
EndNote	Yel H, Dönmez Çavdar A, Kalaycıoğlu H, Aras U (November 1, 2014) Influence of Planer Shavings and Waste Particleboards Usage in Core layer on Physical and Mechanical Properties of Threelayer Particleboards. Kastamonu University Journal of Forestry Faculty 14 2 215–221.
IEEE	H. Yel, A. Dönmez Çavdar, H. Kalaycıoğlu, and U. Aras, “Influence of Planer Shavings and Waste Particleboards Usage in Core layer on Physical and Mechanical Properties of Threelayer Particleboards”, Kastamonu University Journal of Forestry Faculty, vol. 14, no. 2, pp. 215–221, 2014.
ISNAD	Yel, Hüsnü et al. “Influence of Planer Shavings and Waste Particleboards Usage in Core Layer on Physical and Mechanical Properties of Threelayer Particleboards”. Kastamonu University Journal of Forestry Faculty 14/2 (November 2014), 215-221.
JAMA	Yel H, Dönmez Çavdar A, Kalaycıoğlu H, Aras U. Influence of Planer Shavings and Waste Particleboards Usage in Core layer on Physical and Mechanical Properties of Threelayer Particleboards. Kastamonu University Journal of Forestry Faculty. 2014;14:215–221.
MLA	Yel, Hüsnü et al. “Influence of Planer Shavings and Waste Particleboards Usage in Core Layer on Physical and Mechanical Properties of Threelayer Particleboards”. Kastamonu University Journal of Forestry Faculty, vol. 14, no. 2, 2014, pp. 215-21.
Vancouver	Yel H, Dönmez Çavdar A, Kalaycıoğlu H, Aras U. Influence of Planer Shavings and Waste Particleboards Usage in Core layer on Physical and Mechanical Properties of Threelayer Particleboards. Kastamonu University Journal of Forestry Faculty. 2014;14(2):215-21.