Review
BibTex RIS Cite

FUNDAMENTALS OF THIOSULPHATE LEACHING OF GOLD AND SILVER – PART I

Year 2017, Volume: 56 Issue: 3, 117 - 130, 01.09.2017

Fırat Ahlatcı , Ersin Y. Yazıcı , Oktay Celep Hacı Deveci

https://doi.org/10.30797/madencilik.390779
Cited By: 1

Abstract

Today, the most common (>%90) method preferred for production of gold from ores is cyanide leaching. Cyanide leaching with its well-known chemistry has been used industrially since the late 19th century. Restrictions have come into force particularly in recent years due to ever increasing environmental concerns for high toxicity of cyanide. European Union has once considered a general ban on the use of cyanide; however, they could not apply such a ban due to the lack of an alternative that can economically and technically compete with cyanide. Thiosulphate has received particular attention among reagents alternative to cyanide with its attributes such as low toxicity and high leaching kinetics. Thiosulphate leaching could also provide high recoveries in some refractory ores where cyanide leaching fails. The first commercial application of thiosulphate leaching has been implemented by Barrick Gold Co. in 2015. In this study, historical development of ammoniacal thiosulphate leaching, its technical and environmental merits, leach mechanism and parameters affecting leaching were discussed. Alternative thiosulphate leaching systems were also evaluated.

Keywords

Gold/silver Leaching Thiosulphate Cyanide Hydrometallurgy

References

  • Aazami, M., Lapidus, G.T., Azadeh, A., 2014. The Effect of Solution Parameters on The Thiosulfate Leaching of Zarshouran Refractory Gold Ore. International Journal of Mineral Processing, 131, 43-50.
  • Abbruzzese, C., Fornari, P., Massidda, R., Veglio, F., Ubaldini, S., 1995. Thiosulphate Leaching for Gold Hydrometallurgy. Hydrometallurgy, 39, 265-276.
  • Ahlatcı, F., 2016. Bakırlı ve Pirit İçeriği Yüksek Cevher ve Konsantrelerden Tiyosülfat Liçi ile Altın/Gümüş Kazanımı. Yüksek Lisans Tezi, Maden Mühendisliği, Fen Bilimleri Enstitüsü, Karadeniz Teknik Üniversitesi, Trabzon, s. 76.
  • Ahlatcı, F., Koç, E., Yazici, E.Y., Celep, O., Deveci, H., 2016. Sulphide Precipitation of Gold and Silver from Thiosulphate Leach Solutions. In: M.S.Çelik vd., (Eds.), XV. International Mineral Processing Symposium and Exhibition (IMPS), İstanbul, Türkiye, 750-760.
  • Akçil, A., Çiftçi, H., Öztürk, T., 2007. Altın Kazanımında Tiyosülfat Liçi Uygulaması. Madencilik, 46 (4), 31-45.
  • Akçil, A., 2014. Siyanür Yönetilebilir Bir Kimyasal Mı? Madencilik Türkiye, Nisan, 68-72
  • Altınkaya, P., 2016, Refrakter Gümüş Cevherinden Tiyosülfat Liçi ile Gümüş Kazanımı. Yüksek Lisans Tezi, Maden Mühendisliği, Fen Bilimleri Enstitüsü, Karadeniz Teknik Üniversitesi, Trabzon, s. 62.
  • Anderson, C.G., 2016. Alkaline Sulfide Gold Leaching Kinetics. Minerals Engineering, 92, 248–256.
  • Arima, H., Fujita, T., Yen, W.T., 2004. Using Nickel as A Catalyst in Ammonium Thiosulfate Leaching for Gold Extraction. Materials Transactions, 45 (2), 516-526.
  • Avrupa Birliği. 2013. Background Note on Cyanide in Gold Mining, Committee on The Environment, Public Health and Food Safety. 3 syf. http://www.europarl.euro pa.eu/meetdocs/2009_2014/documents/envi/dv/envi20130925_info-cyanide_/envi20130925_infocyanide_ e n.pdf, Son erişim tarihi: 31 Ağustos 2015.
  • Aylmore, M.G., 2001. Treatment of A Refractory Gold- Copper Sulfide Concentrate by Copper Ammoniacal Thiosulfate Leaching. Minerals Engineering, 14 (6), 615-637.
  • Aylmore, M.G., 2005. Alternative Lixiviants to Cyanide for Leaching Gold Ores. Developments in Mineral Processing. Editör: Adams, M.D. Western Australia: Elsevier. 501-539.
  • Aylmore, M.G., 2016. Thiosulfate as an Alternative Lixiviant to Cyanide for Gold Ores. In: M.D. Adams (Ed.), Advances in Gold Ore Processing. Elsevier Science, 485-523.
  • Aylmore, M.G., Muir, D.M., 2001. Thiosulfate Leaching of Gold - A Review. Minerals Engineering, 14 (2), 135-174.
  • Aylmore, M.G., Muir, D.M., Staunton, W.P., 2014. Effect of Minerals on the Stability of Gold in Copper Ammoniacal Thiosulfate Solutions - The Role of Copper, Silver and Polythionates. Hydrometallurgy, 143, 12-22.
  • Baron, J.Y., Mirza, J., Frydrychewicz, A., Lipkowski, J., Choi, Y., 2011. Electrochemical Studies of the Gold- Electrolyte Interface Under Thiosulfate Based Leaching Conditions. In: G. Deschenes, R. Dimitrakopoulos and J. Bouchard (Eds.), World Gold 2011. The Canadian Institute of Mining, Metallurgy and Petroleum, Westmount, 351-362.
  • Barrick Gold, 2010. Annual Report. http://www.barrick. com/files/annual-report/Barrick-Annual-Report-2010.pdf, Son erişim tarihi: 25 Ocak 2017.
  • Barrick Gold, 2013. Annual Report. http://www.barrick.com/files/annual-report/Barrick-Annual-Report-2013.pdf, Son erişim tarihi: 25 Ocak 2017.
  • Barrick Gold, 2014. Annual Report. http://www.barrick.com/files/annual-report/Barrick-Annual-Report-2014.pdf, Son erişim tarihi: 25 Ocak 2017.
  • Barrick Gold, 2015. Annual Report. http://www.barrick.com/files/annual-report/Barrick-Annual-Report-2015.pdf, Son erişim tarihi: 25 Ocak 2017.
  • Baş, A.D., 2015. Barrick ile Altın Üretiminde Yeni Ufuklar. Barrick Gold Yöneticilerinden Dr. Yeonuk choi ile Röportaj, Madencilik Türkiye Dergisi, Temmuz, 48, 74-75.
  • Baş, A.D., Özdemir, E., Yazici, E.Y., Celep, O., Deveci, H., 2011. Ammoniacal Thiosulphate Leaching of a Copper-Rich Gold Ore. Proceedings of The XV. Conference on Environment and Mineral Processing (EAMP), Ostrava/Çek Cumhuriyeti.
  • Baş, A.D., Altinkaya, P., Yazici, E.Y., Deveci, H., 2012. Preg-robbing Potential of Sulphide-Bearing Gold Ore. Proceedings of The XIII. International Mineral Processing Symposium (IMPS). Editörler: Özdağ, H., Bozkurt, V., İpek, H., Bilir, K. Bodrum/Türkiye.
  • Braul, P., 2013. Thiosulphate Going Commercial: Barrick’s Goldstrike Pushes Research Forward on Cyanide Alternative. Canadian Institute of Mining, Metallurgy and Petroleum, 8 (1), 42-45.
  • Berezowsky, R.M.G.S., Sefton, V.B., 1979. Recovery of Gold and Silver from Oxidation Leach Residues by Ammoniacal Thiosulphate Leaching. 108th AIME Annual Meeting, New Orleans, 17-34.
  • Botz, M.M., Mudder, T.I. and Akcil, A.U., 2005. Cyanide Treatment: Physical, Chemical and Biological Processes. In: D.A. Mike and B.A. Wills (Eds.), Developments in Mineral Processing, Elsevier, 672-702.
  • Breuer, P., 2015. Gold Strike with Thiosulphate. CSIRO Journal – Resourceful, 7-8.
  • Breuer, P.L., Jeffrey, M.I., 2002. An Electrochemical Study of Gold Leaching in Thiosulfate Solutions Containing Copper and Ammonia. Hydrometallurgy 65, 145-157.
  • Camelino, S., Rao, J., Padilla, R.L., Lucci, R., 2015. Initial Studies about Gold Leaching from Printed Circuit Boards (PCS’s) of Waste Cell Phones. Procedia Materials Science, 9, 105-112.
  • Celep, O., 2015. Altın Cevherlerinin Zenginleştirilmesi. Türkiye Alim Kitapları, ist ein Imprint der, Deutschland/Almanya, s. 221.
  • Celep, O., Deveci, H., Alp, İ., Yazici, E.Y., Dinç, D., Duran, C., 2014. Ammoniacal Thiosulfate Leaching of Gold from A Refractory Ore Using a Full Factorial Design. Proceedings of The XXVII. Int. Mineral Processing Congress (IMPC). Editorler: Yianatos, J., Doll, A., Gomez, C., Kuyvenhoven, R. Santiago/Chile.
  • Celep, O., Yazici, E. Y., Bölük, D., Deveci, H., Alp, İ., 2010. Evaluation of Preg-robbing Potential of Refractory Gold Ores. Proceedings of The XII. International Mineral Processing Symposium (IMPS). Editörler: Gülsoy Ö.Y., Ergün, Ş.L., Can, N.M., Çelik, İ.B. Kapadokya/Türkiye.
  • Celep, O., Alp, İ., Deveci, H., Vıcıl, M., 2008. The Effect of Mineralogical Structure on The Cyanidation of Gold Ores. Geosound, 52, 43-53.
  • Chandra, I. and Jeffrey, M.I., 2005. A Fundamental Study of Ferric Oxalate for Dissolving Gold in Thiosulfate Solutions. Hydrometallurgy, 77 (3–4), 191-201.
  • Chen, J., Deng, T., Zhu, G., Zhao, J., 1996. Leaching and Recovery of Gold in Thiosulfate Based System- A Research Summary at ICM. Transactions of Indian Institute of Metallurgy, 49 (6), 841-849.
  • Choi, Y., Baron, J.Y., Wang, Q., Langhans, J., Kondos, P., 2013. Thiosulfate Processing - From Lab Curiosity to Commercial Application. World Gold 2013. The Australasian Institute of Mining and Metallurgy (AusIMM), Melbourne, 45-50.
  • Choi, Y., Kondos, P., Aylmore, M., McMullen, J., Van Weert, G., 2007. Thiosulfate Generation in Situ in Precious Metal Recovery. US Patent, WO 2007053947 A1.
  • Choudhary, L., Wang, W., Alfantazi, A., 2016. Electrochemical Corrosion of Stainless Steel in Thiosulfate Solutions Relevant to Gold Leaching. Metallurgical and Materials Transactions A, 47 (1), 314-325.
  • Dasgupta, R., Guan, Y.C., Han, K.N., 1996. The Dissolution Behavior of Gold in Ammoniacal Solutions at 75°C. Society for Mining, Metallurgy, and Exploration, Preprint number-Ön baskı sayısı 96-70.
  • DST, 2014, Cyanide-Free Process for Gold Extraction. Dundee Sustainable Technologies (DST), www.dundeetechnologies.com
  • unne, R., Buda K., Hill, M., Staunton, W., Wardell- Johnson, G., Tjandrawa, V., 2012. Assessment of Options for Economic Processing of Preg-Robbing Gold Ores. Trans. Inst. Min. Metall. C, 121 (4), 217-223.
  • E&MJ, 2012, The Current Status of Cyanide Regulations. http://www.e-mj.com/features/1656-thecurrent-status-of-cyanideregulations.html#.VtATp-Zu3Iw, Son erişim tarihi: 2 Şubat 2016.
  • Euromines. 2015. EU Commission Confirms Sufficient Legislation in Place for Gold. European Association of Mining Industries, Metal Ores & Industrial Minerals. http://www.euromines.org/news/eu-commission-confirms-sufficient-legislation-place-gold Son erişim tarihi: 1 Eylül 2015.
  • Faraz, S., Hossna, D., Rezgar, B., Piroz, Z., 2014. Improved Recovery of a Low-Grade Refractory Gold Ore Using Flotation–Preoxidation–Cyanidation Methods. International Journal of Mining Science and Technology, 24 (4), 537–542.
  • Feng, D., van Deventer, J.S.J., 2001. Preg-robbing Phenomena in The Thiosulphate Leaching of Gold Ores. Minerals Engineering, 14 (11), 1387-1402.
  • Feng, D., van Deventer, J.S.J., 2002. The Role of Heavy Metal Ions in Gold Dissolution in The Ammoniacal Thiosulphate System. Hydrometallurgy, 64 (3), 231-246.
  • Feng, D., van Deventer, J.S.J., 2006. Ammoniacal Thiosulphate Leaching of Gold in The Presence of Pyrite. Hydrometallurgy, 82 (3-4), 126-132.
  • Feng, D., van Deventer, J.S.J., 2010a. Thiosulphate Leaching of Gold in The Presence of Ethylenediaminetetraacetic Acid (EDTA). Minerals Engineering, 23 (2), 143-150.
  • Feng, D., van Deventer, J.S.J., 2010b. Effect of Thiosulphate Salts on Ammoniacal Thiosulphate Leaching of Gold. Hydrometallurgy, 105 (1-2), 120-126.
  • Feng, D., van Deventer, J.S.J., 2011a. Thiosulphate Leaching of Gold in the Presence of Carboxymethyl Cellulose (CMC). Minerals Engineering, 24 (2), 115-121.
  • Feng, D., van Deventer, J.S.J., 2011b. Thiosulphate Leaching of Gold in The Presence of Orthophosphate and Polyphosphate. Hydrometallurgy, 106 (1-2), 38-45.
  • Fleming, C., 2008. Thiosulphate Leaching-An Alternative to Cyanidation in Gold Processing. SGS Mineral Services, T3 SGS 869, s. 2.
  • Fleming, C.A., McMullen J., Thomas, K.G., Wells, J.A., 2001. Recent Advances in The Development of an Alternative to The Cyanidation Process - Based on Thiosulphate Leaching and Resin in Pulp. SGS Mineral Services, Technical Paper, Mart, s. 11.
  • Fleming, C.A., McMullen, J., Thomas, K.G., Wells, J.A., 2003. Recent Advances in The Development of an Alternative to The Cyanidation Process: Thiosulfate Leaching and Resin in Pulp. Minerals and Metallurgical Processing, 20 (1), 1-9.
  • Goodall, W.R., Leatham, J.D., Scales, P.J., 2005. A New Method for Determination of Preg-Robbing in Gold Ores. Minerals Engineering, 18 (12), 1135-1141.
  • Gorain, B.K., Kondos, P.D., Lakshmanan, V.I., 2016. Innovations in Gold and Silver Processing. In: V.I. Lakshmanan, R. Roy and V. Ramachandran (Eds.), Innovative Process Development in Metallurgical Industry. Springer, 393-428.
  • Gos, S, Rubo, A., 2016. The Relevance of Alternative Lixiviants with regard to Technical Aspects”, work safety and environmental safety. http://technology. infomine. com/enviromine/publicat/cyanide.pdf, Son erişim tarihi:2 Şubat 2016.
  • Guan, Y.C., Han, K.N., 1996. The Electrochemical Study on the Dissolution Behavior of Gold in Ammoniacal Solutions at Temperatures Above 100°C. Society for Mining, Metallurgy, and Exploration, Preprint number Ön baskı sayısı 96-66.
  • Güneş, N., Akçil, A., 1997. Altın Kazanımında Kimyasal Proseslerin Incelenmesi. Mühendislik Bilimleri Dergisi, 3 (2), 389-392.
  • Grosse, A.C., Dicinoski, G.W., Shaw, M.J., Haddad, P.R., 2003. Leaching and Recovery of Gold Using Ammoniacal Thiosulfate Leach Liquors (A Review). Hydrometallurgy, 69, 1-21.
  • Ha, V.H., Lee, J.-c., Huynh, T.H., Jeong, J., Pandey, B.D., 2014. Optimizing The Thiosulfate Leaching of Gold from Printed Circuit Boards of Discarded Mobile Phone. Hydrometallurgy, 149, 118-126.
  • Ha, V.H., Lee, J.-c., Jeong, J., Hai, H.T., Jha, M.K., 2010. Thiosulfate Leaching of Gold from Waste Mobile Phones. Journal of Hazardous Materials, 178 (1-3), 1115-1119.
  • Habashi, F., 1999. A Textbook of Hydrometallurgy. Metallurgie Extractive Quebec Publications, Kanada, 739.
  • Hedjazi, F., Monhemius, J., 2016. Industrial Application of Ammonia Assisted Cyanide Leaching for Copper-Gold Ores. Emerging Trends in Minerals Engineering. IMM Transactions, IOM3, London, UK.
  • Hilson, G., Monhemius, A.J., 2006. Alternatives to Cyanide in The Gold Mining Industry: What Prospects for The Future? Journal of Cleaner Production, 14 (12-13), 1158-1167.
  • Jeffrey, M.I., 2001. Kinetic Aspects of Gold and Silver Leaching in Ammonia–Thiosulfate Solutions. Hydrometallurgy, 60 (1), 7-16.
  • Ji, J., Fleming, C., West-Sells, P.G. and Hackl, R.P., 2003. A Novel Thiosulfate System for Leaching Gold without The Use of Copper and Ammonia. In: C.A. Young, A.M. Alfantazi, C.G. Anderson, D.B. Dreisinger, B. Harris, A. James (Ed.), Hydrometallurgy 2003–V. International Conference in Honor of Professor Ian Ritchie. TMS (The Minerals, Metals & Materials Society), 227-244.
  • Jiang, T., Chen, J., Xu, S., 1993. Electrochemistry and Mechanism of Leaching Gold with Ammoniacal Thiosulfate. XVII. International Mineral Processing Congress, Sydney, The Australasian Institude of Mining and Metallurgy. Parkvill Vic., 23-28 May, 1141-1146.
  • Kerley, B.J., 1981. Recovery of Precious Metals from Difficult Ores. US Patent, US 4269622 A.
  • Kerley, B.J., 1983. Recovery of Precious Metals from Difficult Ores. US Patent, US 4369061 A.
  • King, J.A., 2001. Method for Recovering Gold from Refractory Carbonaceous Ores. US Patent, US 6251163 B1.
  • Marchbank, A.R., Thomas, K.G., Dreisinger, D., Fleming, C., 1996. Gold Recovery from Refractory Carbonaceous Ores by Pressure Oxidation and Thiosulfate Leaching. US Patent, US 5536297 A.
  • Marsden, J.O., House, C.L., 2006. The Chemistry of Gold Extraction. SME, Colorado, s. 651.
  • Meng, X., Han, K.N., 1993. The Dissolution Behaviour of Gold in Ammoniacal Solutions. Hydrometallurgy Fundamentals, Technology and Innovations SME, J.B. Hiskey and G.W. Warren, Littleton, Colorado, 206-221.
  • Miller, J.D., Wan, R.Y., Diaz, X., 2005. Preg-robbing Gold Ores, Developments in Mineral Processing.” Editör: Adams M.D. Western Australia: Elsevier, 937-972.
  • Molleman, E., 1998. The Treatment of Copper–Gold Ores by Ammonium Thiosulfate Leaching, Yüksek Lisans Tezi, The University of British Columbia, Kanada, s. 186.
  • Molleman, E., Dreisinger, D., 2002. The Treatment of Copper–Gold Ores by Ammonium Thiosulfate Leaching. Hydrometallurgy, 66, 1-21.
  • Muir, D.M., La Brooy, S.R., Fenton, K., 1991. Processing Copper-Gold Ores with Ammonia or Ammonia-Cyanide Solutions. World Gold 1991, 21-25 Nisan, Cairns Qld, 145-150.
  • Navarro, P., Vargas, C., Alonso, M., Alguacil, F.J., 2007. Towards A More Environmentally Friendly Process for Gold: Models on Gold Adsorption onto Activated Carbon from Ammoniacal Thiosulfate Solutions. Desalination, 211, 58-63.
  • O’Malley, G.P., 2002. Recovery of Gold from Thiosulfate Solutions and Pulps with Anion Exchange Resins. Doktora Tezi, Murdoch University, Western Australia, s. 256.
  • Oraby, E.A., Eksteen, J.J., 2015a. Gold leaching in cyanide-starved copper solutions in the presence of glycine. Hydrometallurgy, 156, 81-88.
  • Oraby, E.A., Eksteen, J.J., 2015b. The Leaching of Gold, Silver and Their Alloys in Alkaline Glycine–Peroxide Solutions and Their Adsorption on Carbon. Hydrometallurgy, 152, 199-203.
  • Perez, A.E., Galaviz, H.D., 1987. Method for Recovery of Precious Metals from Difficult Ores with Copper-Ammonium Thiosulfate. US Patent, US 4654078 A.
  • Puente-Siller, D.M., Fuentes-Aceituno, J.C., Nava-Alonso, F., 2014. Study of Thiosulfate Leaching of Silver Sulfide in The Presence of EDTA and Sodium Citrate. Effect of NaOH and NH4OH. Hydrometallurgy, 14, 1-11.
  • Puente-Siller, D.M., Fuentes-Aceituno, J.C., Nava-Alonso, F., 2017. An Analysis of The Efficiency and Sustainability of The Thiosulfate-Copper-Ammonia- Monoethanolamine System for The Recovery of Silver as An Alternative to Cyanidation, 169, 16-25.
  • Rath, R.K., Hiroyoshi, N., Tsunekawa, M., Hirajima, T., 2003. Ammoniacal Thiosulphate Leaching of God Ore. The European Journal of Mineral Processing and Environmental Protection, 3 (3), 344-352.
  • Rees, K.L., Van Deventer, J.S.J., 2000. Preg-robbing Phenomena in The Cyanidation of Sulphide Gold Ores. Hydrometallurgy, 58 (1), 61-80.
  • Resmi Gazete, 2015. Maden Atıkları Yönetmeliği. Çevre ve Şehircilik Bakanlığı, 15 Temmuz 2015 Çarşamba, Sayı: 29417
  • Rodriguez, L.G., Macias, F., 2009. To Cyanide or Not to Cyanide? Some Argentinean Provinces Banned Use of Cyanide in Mining Activities: Is This Prohibition Legal? Rocky Mountain Mineral Law Foundation Journal, 46 (2), 237-252.
  • Senanayake, G., 2004a. Analysis of Reaction Kinetics, Speciation and Mechanism of Gold Leaching and Thiosulfate Oxidation by Ammoniacal Copper(II) Solutions. Hydrometallurgy, 75 (1-4), 55-75.
  • Senanayake, G., 2004b. Gold Leaching in Non-Cyanide Lixiviant Systems: Critical Issues on Fundamentals and Applications. Minerals Engineering, 17 (6), 785–801.
  • Senanayake, G., 2005. The Role of Ligands and Oxidants in Thiosulfate Leaching of Gold. Gold Bulletin, 38,170-179.
  • Senanayake, G., 2007. Review of Rate Constants for Thiosulphate Leaching of Gold from Ores, Concentrates and Flat Surfaces: Effect of Host Minerals and pH. Minerals Engineering, 20, 1-15.
  • Senanayake, G., 2012. Gold Leaching by Copper(II) in Ammoniacal Thiosulphate Solutions in The Presence of Additives. Part I: A Review of the Effect of Hard-Soft and Lewis Acid-Base Propertiesand Interactions of Ions. Hydrometallurgy, 115-116, 1-20.
  • Syed, S., 2012. Recovery of Gold from Secondary Sources–A Review. Hydrometallurgy, 115-116, 30-51.
  • Tozawa, K., Inui, Y., Umetsu, Y., 1981. Dissolution of Gold in Ammoniacal Thiosulfate Solution. Paper Presented at 110th Annual Meeting of AIME, Chicago, February 22-26, A-81-25, 12.
  • Wan, R., LeVier, M., Clayton, R.B., 1994. Hydrometallurgical Process for the Recovery of Precious Metal Values from Precious Metal Ores with Thiosulfate Lixiviant. US Patent, US 5354359 A.
  • West-Sells, P.G., Hackl, R.P., 2005. A Novel Thiosulfate Leach Process for The Treatment of Carbonaceous Gold Ores. In: Deschenes, G., Hodouin, D., Lorenzen, L. (Eds.), Treatment of Gold Ores. The Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Canada, 209-223.
  • Xia, C., 2008. Associated Sulfide Minerals in Thiosulfate Leaching of Gold: Problems and Solutions. Doktora Tezi, Queen’s University Kingston, Ontario, Kanada, s.321.
  • Xia, C., Yen, W.T., Deschenes, G., 2003. Improvement of Thiosulfate Stability in Gold Leaching. Minerals & Metallurgical Processing, 20 (2), 68-72.
  • Xu, B., Yang, Y., Jiang, T., Li, Q., Zhang, X., Wang, D., 2015. Improved Thiosulfate Leaching of a Refractory Gold Concentrate Calcine with Additives. Hydrometallurgy, 152, 214-222.
  • Van Zijll de Jong, S., van Deventer, J.S.J., Hamilton, I.C., 2002. The Effect of Metal Ions on the Electrochemistry of Gold Dissolution in the Ammoniacal Thiosulphate System. In: Gostomski, P.A., Mori- son, K.R. (Eds.), Proc. 9th APCChE Cong. and CHEMECA 2002. University of Canterbury, Christchurch.
  • Yazıcı, E. Y., 2005. Atık Sulardaki Siyanürün Hidrojen Peroksit, Aktif Karbon Adsorpsiyonu ve Ses Ötesi Dalgalarla Uzaklaştırılması, Yüksek Lisans Tezi, Maden Mühendisliği, Fen Bilimleri Enstitüsü, Karadeniz Teknik Üniversitesi, Trabzon, s. 124.
  • Zhang, H., Dreisinger, D.B., 2004. The Recovery of Gold from Ammoniacal Thiosulfate Solutions Containing Copper Using Ion Exchange Resin Columns. Hydrometallurgy, 72, 225-234.
  • Zhang, S., Nicol, M.J., 2003. An Electrochemical Study of the Dissolution of Gold in Thiosulfate Solutions. Part I. Alkaline Solutions. Journal of Applied Electrochemistry, 33, 767-775.
  • Zhang, S., Nicol, M.J., 2005. An Electrochemical Study of the Dissolution of Gold in Thiosulfate Solutions. Part II. Effect of Copper, Journal of Applied Electrochemistry, 35, 339–345.
  • Zhang, X.M., Senanayake, G., 2016. A Review of Ammoniacal Thiosulfate Leaching of Gold: An Update Useful for Further Research in Non-Cyanide Gold Lixiviants. Mineral Processing and Extractive Metallurgy Review, 37 (6), 385-411.
  • Zipperian, D., Raghavan, S., Wilson, J.P., 1988. Gold and Silver Extraction by Ammoniacal Thiosulfate Leaching from A Rhyolite Ore. Hydrometallurgy, 19, 361–375.

TİYOSÜLFAT İLE ALTIN VE GÜMÜŞ LİÇİNİN TEMELLERİ – BÖLÜM I

Year 2017, Volume: 56 Issue: 3, 117 - 130, 01.09.2017

Fırat Ahlatcı , Ersin Y. Yazıcı , Oktay Celep Hacı Deveci

https://doi.org/10.30797/madencilik.390779
Cited By: 1

Abstract

Günümüzde, cevherlerden altın üretiminde en yaygın (>%90) olarak tercih edilen yöntem siyanür içidir. Siyanür liçi, 19. yüzyılın sonlarından itibaren endüstriyel olarak kullanılmaktadır ve liç imyası iyi bilinmektedir. Bununla beraber özellikle son yıllarda, siyanürün yüksek derecede
toksik özelliğe sahip olmasına bağlı olarak artan çevresel kaygılar nedeniyle, kullanımına air kısıtlamalar getirilmiştir. Avrupa Birliği 2010 yılında siyanürün tamamen yasaklanmasını eğerlendirmiş ancak; altın kazanımında teknik ve ekonomik açıdan siyanür liçi ile yarışabilen bir teknoloji mevcut olmadığı için genel bir yasak getirmemiştir. Siyanüre alternatif reaktifler arasında tiyosülfat, düşük toksik özelliği ve yüksek liç kinetiği gibi özellikleri ile ön plana çıkmıştır. Tiyosülfat liçi, siyanür ile etkin olarak kazanılamayan bazı refrakter tip cevherlerde de yüksek verimler
sağlamaktadır. Tiyosülfat liçinin ilk endüstriyel uygulaması 2015 yılında Barrick Gold firması tarafından uygulamaya geçirilmiştir. Bu çalışmada, amonyaklı tiyosülfat liçinin tarihsel gelişimi, siyanür liçi ile teknik/çevresel açıdan karşılaştırılması, liç mekanizması ve liç işlemini etkileyen
temel parametreler irdelenmiştir. Ayrıca, alternatif tiyosülfat liçi sistemleri de değerlendirilmiştir.

Keywords

Altın/gümüş Liç Tiyosülfat Siyanür Hidrometalurji

References

  • Aazami, M., Lapidus, G.T., Azadeh, A., 2014. The Effect of Solution Parameters on The Thiosulfate Leaching of Zarshouran Refractory Gold Ore. International Journal of Mineral Processing, 131, 43-50.
  • Abbruzzese, C., Fornari, P., Massidda, R., Veglio, F., Ubaldini, S., 1995. Thiosulphate Leaching for Gold Hydrometallurgy. Hydrometallurgy, 39, 265-276.
  • Ahlatcı, F., 2016. Bakırlı ve Pirit İçeriği Yüksek Cevher ve Konsantrelerden Tiyosülfat Liçi ile Altın/Gümüş Kazanımı. Yüksek Lisans Tezi, Maden Mühendisliği, Fen Bilimleri Enstitüsü, Karadeniz Teknik Üniversitesi, Trabzon, s. 76.
  • Ahlatcı, F., Koç, E., Yazici, E.Y., Celep, O., Deveci, H., 2016. Sulphide Precipitation of Gold and Silver from Thiosulphate Leach Solutions. In: M.S.Çelik vd., (Eds.), XV. International Mineral Processing Symposium and Exhibition (IMPS), İstanbul, Türkiye, 750-760.
  • Akçil, A., Çiftçi, H., Öztürk, T., 2007. Altın Kazanımında Tiyosülfat Liçi Uygulaması. Madencilik, 46 (4), 31-45.
  • Akçil, A., 2014. Siyanür Yönetilebilir Bir Kimyasal Mı? Madencilik Türkiye, Nisan, 68-72
  • Altınkaya, P., 2016, Refrakter Gümüş Cevherinden Tiyosülfat Liçi ile Gümüş Kazanımı. Yüksek Lisans Tezi, Maden Mühendisliği, Fen Bilimleri Enstitüsü, Karadeniz Teknik Üniversitesi, Trabzon, s. 62.
  • Anderson, C.G., 2016. Alkaline Sulfide Gold Leaching Kinetics. Minerals Engineering, 92, 248–256.
  • Arima, H., Fujita, T., Yen, W.T., 2004. Using Nickel as A Catalyst in Ammonium Thiosulfate Leaching for Gold Extraction. Materials Transactions, 45 (2), 516-526.
  • Avrupa Birliği. 2013. Background Note on Cyanide in Gold Mining, Committee on The Environment, Public Health and Food Safety. 3 syf. http://www.europarl.euro pa.eu/meetdocs/2009_2014/documents/envi/dv/envi20130925_info-cyanide_/envi20130925_infocyanide_ e n.pdf, Son erişim tarihi: 31 Ağustos 2015.
  • Aylmore, M.G., 2001. Treatment of A Refractory Gold- Copper Sulfide Concentrate by Copper Ammoniacal Thiosulfate Leaching. Minerals Engineering, 14 (6), 615-637.
  • Aylmore, M.G., 2005. Alternative Lixiviants to Cyanide for Leaching Gold Ores. Developments in Mineral Processing. Editör: Adams, M.D. Western Australia: Elsevier. 501-539.
  • Aylmore, M.G., 2016. Thiosulfate as an Alternative Lixiviant to Cyanide for Gold Ores. In: M.D. Adams (Ed.), Advances in Gold Ore Processing. Elsevier Science, 485-523.
  • Aylmore, M.G., Muir, D.M., 2001. Thiosulfate Leaching of Gold - A Review. Minerals Engineering, 14 (2), 135-174.
  • Aylmore, M.G., Muir, D.M., Staunton, W.P., 2014. Effect of Minerals on the Stability of Gold in Copper Ammoniacal Thiosulfate Solutions - The Role of Copper, Silver and Polythionates. Hydrometallurgy, 143, 12-22.
  • Baron, J.Y., Mirza, J., Frydrychewicz, A., Lipkowski, J., Choi, Y., 2011. Electrochemical Studies of the Gold- Electrolyte Interface Under Thiosulfate Based Leaching Conditions. In: G. Deschenes, R. Dimitrakopoulos and J. Bouchard (Eds.), World Gold 2011. The Canadian Institute of Mining, Metallurgy and Petroleum, Westmount, 351-362.
  • Barrick Gold, 2010. Annual Report. http://www.barrick. com/files/annual-report/Barrick-Annual-Report-2010.pdf, Son erişim tarihi: 25 Ocak 2017.
  • Barrick Gold, 2013. Annual Report. http://www.barrick.com/files/annual-report/Barrick-Annual-Report-2013.pdf, Son erişim tarihi: 25 Ocak 2017.
  • Barrick Gold, 2014. Annual Report. http://www.barrick.com/files/annual-report/Barrick-Annual-Report-2014.pdf, Son erişim tarihi: 25 Ocak 2017.
  • Barrick Gold, 2015. Annual Report. http://www.barrick.com/files/annual-report/Barrick-Annual-Report-2015.pdf, Son erişim tarihi: 25 Ocak 2017.
  • Baş, A.D., 2015. Barrick ile Altın Üretiminde Yeni Ufuklar. Barrick Gold Yöneticilerinden Dr. Yeonuk choi ile Röportaj, Madencilik Türkiye Dergisi, Temmuz, 48, 74-75.
  • Baş, A.D., Özdemir, E., Yazici, E.Y., Celep, O., Deveci, H., 2011. Ammoniacal Thiosulphate Leaching of a Copper-Rich Gold Ore. Proceedings of The XV. Conference on Environment and Mineral Processing (EAMP), Ostrava/Çek Cumhuriyeti.
  • Baş, A.D., Altinkaya, P., Yazici, E.Y., Deveci, H., 2012. Preg-robbing Potential of Sulphide-Bearing Gold Ore. Proceedings of The XIII. International Mineral Processing Symposium (IMPS). Editörler: Özdağ, H., Bozkurt, V., İpek, H., Bilir, K. Bodrum/Türkiye.
  • Braul, P., 2013. Thiosulphate Going Commercial: Barrick’s Goldstrike Pushes Research Forward on Cyanide Alternative. Canadian Institute of Mining, Metallurgy and Petroleum, 8 (1), 42-45.
  • Berezowsky, R.M.G.S., Sefton, V.B., 1979. Recovery of Gold and Silver from Oxidation Leach Residues by Ammoniacal Thiosulphate Leaching. 108th AIME Annual Meeting, New Orleans, 17-34.
  • Botz, M.M., Mudder, T.I. and Akcil, A.U., 2005. Cyanide Treatment: Physical, Chemical and Biological Processes. In: D.A. Mike and B.A. Wills (Eds.), Developments in Mineral Processing, Elsevier, 672-702.
  • Breuer, P., 2015. Gold Strike with Thiosulphate. CSIRO Journal – Resourceful, 7-8.
  • Breuer, P.L., Jeffrey, M.I., 2002. An Electrochemical Study of Gold Leaching in Thiosulfate Solutions Containing Copper and Ammonia. Hydrometallurgy 65, 145-157.
  • Camelino, S., Rao, J., Padilla, R.L., Lucci, R., 2015. Initial Studies about Gold Leaching from Printed Circuit Boards (PCS’s) of Waste Cell Phones. Procedia Materials Science, 9, 105-112.
  • Celep, O., 2015. Altın Cevherlerinin Zenginleştirilmesi. Türkiye Alim Kitapları, ist ein Imprint der, Deutschland/Almanya, s. 221.
  • Celep, O., Deveci, H., Alp, İ., Yazici, E.Y., Dinç, D., Duran, C., 2014. Ammoniacal Thiosulfate Leaching of Gold from A Refractory Ore Using a Full Factorial Design. Proceedings of The XXVII. Int. Mineral Processing Congress (IMPC). Editorler: Yianatos, J., Doll, A., Gomez, C., Kuyvenhoven, R. Santiago/Chile.
  • Celep, O., Yazici, E. Y., Bölük, D., Deveci, H., Alp, İ., 2010. Evaluation of Preg-robbing Potential of Refractory Gold Ores. Proceedings of The XII. International Mineral Processing Symposium (IMPS). Editörler: Gülsoy Ö.Y., Ergün, Ş.L., Can, N.M., Çelik, İ.B. Kapadokya/Türkiye.
  • Celep, O., Alp, İ., Deveci, H., Vıcıl, M., 2008. The Effect of Mineralogical Structure on The Cyanidation of Gold Ores. Geosound, 52, 43-53.
  • Chandra, I. and Jeffrey, M.I., 2005. A Fundamental Study of Ferric Oxalate for Dissolving Gold in Thiosulfate Solutions. Hydrometallurgy, 77 (3–4), 191-201.
  • Chen, J., Deng, T., Zhu, G., Zhao, J., 1996. Leaching and Recovery of Gold in Thiosulfate Based System- A Research Summary at ICM. Transactions of Indian Institute of Metallurgy, 49 (6), 841-849.
  • Choi, Y., Baron, J.Y., Wang, Q., Langhans, J., Kondos, P., 2013. Thiosulfate Processing - From Lab Curiosity to Commercial Application. World Gold 2013. The Australasian Institute of Mining and Metallurgy (AusIMM), Melbourne, 45-50.
  • Choi, Y., Kondos, P., Aylmore, M., McMullen, J., Van Weert, G., 2007. Thiosulfate Generation in Situ in Precious Metal Recovery. US Patent, WO 2007053947 A1.
  • Choudhary, L., Wang, W., Alfantazi, A., 2016. Electrochemical Corrosion of Stainless Steel in Thiosulfate Solutions Relevant to Gold Leaching. Metallurgical and Materials Transactions A, 47 (1), 314-325.
  • Dasgupta, R., Guan, Y.C., Han, K.N., 1996. The Dissolution Behavior of Gold in Ammoniacal Solutions at 75°C. Society for Mining, Metallurgy, and Exploration, Preprint number-Ön baskı sayısı 96-70.
  • DST, 2014, Cyanide-Free Process for Gold Extraction. Dundee Sustainable Technologies (DST), www.dundeetechnologies.com
  • unne, R., Buda K., Hill, M., Staunton, W., Wardell- Johnson, G., Tjandrawa, V., 2012. Assessment of Options for Economic Processing of Preg-Robbing Gold Ores. Trans. Inst. Min. Metall. C, 121 (4), 217-223.
  • E&MJ, 2012, The Current Status of Cyanide Regulations. http://www.e-mj.com/features/1656-thecurrent-status-of-cyanideregulations.html#.VtATp-Zu3Iw, Son erişim tarihi: 2 Şubat 2016.
  • Euromines. 2015. EU Commission Confirms Sufficient Legislation in Place for Gold. European Association of Mining Industries, Metal Ores & Industrial Minerals. http://www.euromines.org/news/eu-commission-confirms-sufficient-legislation-place-gold Son erişim tarihi: 1 Eylül 2015.
  • Faraz, S., Hossna, D., Rezgar, B., Piroz, Z., 2014. Improved Recovery of a Low-Grade Refractory Gold Ore Using Flotation–Preoxidation–Cyanidation Methods. International Journal of Mining Science and Technology, 24 (4), 537–542.
  • Feng, D., van Deventer, J.S.J., 2001. Preg-robbing Phenomena in The Thiosulphate Leaching of Gold Ores. Minerals Engineering, 14 (11), 1387-1402.
  • Feng, D., van Deventer, J.S.J., 2002. The Role of Heavy Metal Ions in Gold Dissolution in The Ammoniacal Thiosulphate System. Hydrometallurgy, 64 (3), 231-246.
  • Feng, D., van Deventer, J.S.J., 2006. Ammoniacal Thiosulphate Leaching of Gold in The Presence of Pyrite. Hydrometallurgy, 82 (3-4), 126-132.
  • Feng, D., van Deventer, J.S.J., 2010a. Thiosulphate Leaching of Gold in The Presence of Ethylenediaminetetraacetic Acid (EDTA). Minerals Engineering, 23 (2), 143-150.
  • Feng, D., van Deventer, J.S.J., 2010b. Effect of Thiosulphate Salts on Ammoniacal Thiosulphate Leaching of Gold. Hydrometallurgy, 105 (1-2), 120-126.
  • Feng, D., van Deventer, J.S.J., 2011a. Thiosulphate Leaching of Gold in the Presence of Carboxymethyl Cellulose (CMC). Minerals Engineering, 24 (2), 115-121.
  • Feng, D., van Deventer, J.S.J., 2011b. Thiosulphate Leaching of Gold in The Presence of Orthophosphate and Polyphosphate. Hydrometallurgy, 106 (1-2), 38-45.
  • Fleming, C., 2008. Thiosulphate Leaching-An Alternative to Cyanidation in Gold Processing. SGS Mineral Services, T3 SGS 869, s. 2.
  • Fleming, C.A., McMullen J., Thomas, K.G., Wells, J.A., 2001. Recent Advances in The Development of an Alternative to The Cyanidation Process - Based on Thiosulphate Leaching and Resin in Pulp. SGS Mineral Services, Technical Paper, Mart, s. 11.
  • Fleming, C.A., McMullen, J., Thomas, K.G., Wells, J.A., 2003. Recent Advances in The Development of an Alternative to The Cyanidation Process: Thiosulfate Leaching and Resin in Pulp. Minerals and Metallurgical Processing, 20 (1), 1-9.
  • Goodall, W.R., Leatham, J.D., Scales, P.J., 2005. A New Method for Determination of Preg-Robbing in Gold Ores. Minerals Engineering, 18 (12), 1135-1141.
  • Gorain, B.K., Kondos, P.D., Lakshmanan, V.I., 2016. Innovations in Gold and Silver Processing. In: V.I. Lakshmanan, R. Roy and V. Ramachandran (Eds.), Innovative Process Development in Metallurgical Industry. Springer, 393-428.
  • Gos, S, Rubo, A., 2016. The Relevance of Alternative Lixiviants with regard to Technical Aspects”, work safety and environmental safety. http://technology. infomine. com/enviromine/publicat/cyanide.pdf, Son erişim tarihi:2 Şubat 2016.
  • Guan, Y.C., Han, K.N., 1996. The Electrochemical Study on the Dissolution Behavior of Gold in Ammoniacal Solutions at Temperatures Above 100°C. Society for Mining, Metallurgy, and Exploration, Preprint number Ön baskı sayısı 96-66.
  • Güneş, N., Akçil, A., 1997. Altın Kazanımında Kimyasal Proseslerin Incelenmesi. Mühendislik Bilimleri Dergisi, 3 (2), 389-392.
  • Grosse, A.C., Dicinoski, G.W., Shaw, M.J., Haddad, P.R., 2003. Leaching and Recovery of Gold Using Ammoniacal Thiosulfate Leach Liquors (A Review). Hydrometallurgy, 69, 1-21.
  • Ha, V.H., Lee, J.-c., Huynh, T.H., Jeong, J., Pandey, B.D., 2014. Optimizing The Thiosulfate Leaching of Gold from Printed Circuit Boards of Discarded Mobile Phone. Hydrometallurgy, 149, 118-126.
  • Ha, V.H., Lee, J.-c., Jeong, J., Hai, H.T., Jha, M.K., 2010. Thiosulfate Leaching of Gold from Waste Mobile Phones. Journal of Hazardous Materials, 178 (1-3), 1115-1119.
  • Habashi, F., 1999. A Textbook of Hydrometallurgy. Metallurgie Extractive Quebec Publications, Kanada, 739.
  • Hedjazi, F., Monhemius, J., 2016. Industrial Application of Ammonia Assisted Cyanide Leaching for Copper-Gold Ores. Emerging Trends in Minerals Engineering. IMM Transactions, IOM3, London, UK.
  • Hilson, G., Monhemius, A.J., 2006. Alternatives to Cyanide in The Gold Mining Industry: What Prospects for The Future? Journal of Cleaner Production, 14 (12-13), 1158-1167.
  • Jeffrey, M.I., 2001. Kinetic Aspects of Gold and Silver Leaching in Ammonia–Thiosulfate Solutions. Hydrometallurgy, 60 (1), 7-16.
  • Ji, J., Fleming, C., West-Sells, P.G. and Hackl, R.P., 2003. A Novel Thiosulfate System for Leaching Gold without The Use of Copper and Ammonia. In: C.A. Young, A.M. Alfantazi, C.G. Anderson, D.B. Dreisinger, B. Harris, A. James (Ed.), Hydrometallurgy 2003–V. International Conference in Honor of Professor Ian Ritchie. TMS (The Minerals, Metals & Materials Society), 227-244.
  • Jiang, T., Chen, J., Xu, S., 1993. Electrochemistry and Mechanism of Leaching Gold with Ammoniacal Thiosulfate. XVII. International Mineral Processing Congress, Sydney, The Australasian Institude of Mining and Metallurgy. Parkvill Vic., 23-28 May, 1141-1146.
  • Kerley, B.J., 1981. Recovery of Precious Metals from Difficult Ores. US Patent, US 4269622 A.
  • Kerley, B.J., 1983. Recovery of Precious Metals from Difficult Ores. US Patent, US 4369061 A.
  • King, J.A., 2001. Method for Recovering Gold from Refractory Carbonaceous Ores. US Patent, US 6251163 B1.
  • Marchbank, A.R., Thomas, K.G., Dreisinger, D., Fleming, C., 1996. Gold Recovery from Refractory Carbonaceous Ores by Pressure Oxidation and Thiosulfate Leaching. US Patent, US 5536297 A.
  • Marsden, J.O., House, C.L., 2006. The Chemistry of Gold Extraction. SME, Colorado, s. 651.
  • Meng, X., Han, K.N., 1993. The Dissolution Behaviour of Gold in Ammoniacal Solutions. Hydrometallurgy Fundamentals, Technology and Innovations SME, J.B. Hiskey and G.W. Warren, Littleton, Colorado, 206-221.
  • Miller, J.D., Wan, R.Y., Diaz, X., 2005. Preg-robbing Gold Ores, Developments in Mineral Processing.” Editör: Adams M.D. Western Australia: Elsevier, 937-972.
  • Molleman, E., 1998. The Treatment of Copper–Gold Ores by Ammonium Thiosulfate Leaching, Yüksek Lisans Tezi, The University of British Columbia, Kanada, s. 186.
  • Molleman, E., Dreisinger, D., 2002. The Treatment of Copper–Gold Ores by Ammonium Thiosulfate Leaching. Hydrometallurgy, 66, 1-21.
  • Muir, D.M., La Brooy, S.R., Fenton, K., 1991. Processing Copper-Gold Ores with Ammonia or Ammonia-Cyanide Solutions. World Gold 1991, 21-25 Nisan, Cairns Qld, 145-150.
  • Navarro, P., Vargas, C., Alonso, M., Alguacil, F.J., 2007. Towards A More Environmentally Friendly Process for Gold: Models on Gold Adsorption onto Activated Carbon from Ammoniacal Thiosulfate Solutions. Desalination, 211, 58-63.
  • O’Malley, G.P., 2002. Recovery of Gold from Thiosulfate Solutions and Pulps with Anion Exchange Resins. Doktora Tezi, Murdoch University, Western Australia, s. 256.
  • Oraby, E.A., Eksteen, J.J., 2015a. Gold leaching in cyanide-starved copper solutions in the presence of glycine. Hydrometallurgy, 156, 81-88.
  • Oraby, E.A., Eksteen, J.J., 2015b. The Leaching of Gold, Silver and Their Alloys in Alkaline Glycine–Peroxide Solutions and Their Adsorption on Carbon. Hydrometallurgy, 152, 199-203.
  • Perez, A.E., Galaviz, H.D., 1987. Method for Recovery of Precious Metals from Difficult Ores with Copper-Ammonium Thiosulfate. US Patent, US 4654078 A.
  • Puente-Siller, D.M., Fuentes-Aceituno, J.C., Nava-Alonso, F., 2014. Study of Thiosulfate Leaching of Silver Sulfide in The Presence of EDTA and Sodium Citrate. Effect of NaOH and NH4OH. Hydrometallurgy, 14, 1-11.
  • Puente-Siller, D.M., Fuentes-Aceituno, J.C., Nava-Alonso, F., 2017. An Analysis of The Efficiency and Sustainability of The Thiosulfate-Copper-Ammonia- Monoethanolamine System for The Recovery of Silver as An Alternative to Cyanidation, 169, 16-25.
  • Rath, R.K., Hiroyoshi, N., Tsunekawa, M., Hirajima, T., 2003. Ammoniacal Thiosulphate Leaching of God Ore. The European Journal of Mineral Processing and Environmental Protection, 3 (3), 344-352.
  • Rees, K.L., Van Deventer, J.S.J., 2000. Preg-robbing Phenomena in The Cyanidation of Sulphide Gold Ores. Hydrometallurgy, 58 (1), 61-80.
  • Resmi Gazete, 2015. Maden Atıkları Yönetmeliği. Çevre ve Şehircilik Bakanlığı, 15 Temmuz 2015 Çarşamba, Sayı: 29417
  • Rodriguez, L.G., Macias, F., 2009. To Cyanide or Not to Cyanide? Some Argentinean Provinces Banned Use of Cyanide in Mining Activities: Is This Prohibition Legal? Rocky Mountain Mineral Law Foundation Journal, 46 (2), 237-252.
  • Senanayake, G., 2004a. Analysis of Reaction Kinetics, Speciation and Mechanism of Gold Leaching and Thiosulfate Oxidation by Ammoniacal Copper(II) Solutions. Hydrometallurgy, 75 (1-4), 55-75.
  • Senanayake, G., 2004b. Gold Leaching in Non-Cyanide Lixiviant Systems: Critical Issues on Fundamentals and Applications. Minerals Engineering, 17 (6), 785–801.
  • Senanayake, G., 2005. The Role of Ligands and Oxidants in Thiosulfate Leaching of Gold. Gold Bulletin, 38,170-179.
  • Senanayake, G., 2007. Review of Rate Constants for Thiosulphate Leaching of Gold from Ores, Concentrates and Flat Surfaces: Effect of Host Minerals and pH. Minerals Engineering, 20, 1-15.
  • Senanayake, G., 2012. Gold Leaching by Copper(II) in Ammoniacal Thiosulphate Solutions in The Presence of Additives. Part I: A Review of the Effect of Hard-Soft and Lewis Acid-Base Propertiesand Interactions of Ions. Hydrometallurgy, 115-116, 1-20.
  • Syed, S., 2012. Recovery of Gold from Secondary Sources–A Review. Hydrometallurgy, 115-116, 30-51.
  • Tozawa, K., Inui, Y., Umetsu, Y., 1981. Dissolution of Gold in Ammoniacal Thiosulfate Solution. Paper Presented at 110th Annual Meeting of AIME, Chicago, February 22-26, A-81-25, 12.
  • Wan, R., LeVier, M., Clayton, R.B., 1994. Hydrometallurgical Process for the Recovery of Precious Metal Values from Precious Metal Ores with Thiosulfate Lixiviant. US Patent, US 5354359 A.
  • West-Sells, P.G., Hackl, R.P., 2005. A Novel Thiosulfate Leach Process for The Treatment of Carbonaceous Gold Ores. In: Deschenes, G., Hodouin, D., Lorenzen, L. (Eds.), Treatment of Gold Ores. The Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Canada, 209-223.
  • Xia, C., 2008. Associated Sulfide Minerals in Thiosulfate Leaching of Gold: Problems and Solutions. Doktora Tezi, Queen’s University Kingston, Ontario, Kanada, s.321.
  • Xia, C., Yen, W.T., Deschenes, G., 2003. Improvement of Thiosulfate Stability in Gold Leaching. Minerals & Metallurgical Processing, 20 (2), 68-72.
  • Xu, B., Yang, Y., Jiang, T., Li, Q., Zhang, X., Wang, D., 2015. Improved Thiosulfate Leaching of a Refractory Gold Concentrate Calcine with Additives. Hydrometallurgy, 152, 214-222.
  • Van Zijll de Jong, S., van Deventer, J.S.J., Hamilton, I.C., 2002. The Effect of Metal Ions on the Electrochemistry of Gold Dissolution in the Ammoniacal Thiosulphate System. In: Gostomski, P.A., Mori- son, K.R. (Eds.), Proc. 9th APCChE Cong. and CHEMECA 2002. University of Canterbury, Christchurch.
  • Yazıcı, E. Y., 2005. Atık Sulardaki Siyanürün Hidrojen Peroksit, Aktif Karbon Adsorpsiyonu ve Ses Ötesi Dalgalarla Uzaklaştırılması, Yüksek Lisans Tezi, Maden Mühendisliği, Fen Bilimleri Enstitüsü, Karadeniz Teknik Üniversitesi, Trabzon, s. 124.
  • Zhang, H., Dreisinger, D.B., 2004. The Recovery of Gold from Ammoniacal Thiosulfate Solutions Containing Copper Using Ion Exchange Resin Columns. Hydrometallurgy, 72, 225-234.
  • Zhang, S., Nicol, M.J., 2003. An Electrochemical Study of the Dissolution of Gold in Thiosulfate Solutions. Part I. Alkaline Solutions. Journal of Applied Electrochemistry, 33, 767-775.
  • Zhang, S., Nicol, M.J., 2005. An Electrochemical Study of the Dissolution of Gold in Thiosulfate Solutions. Part II. Effect of Copper, Journal of Applied Electrochemistry, 35, 339–345.
  • Zhang, X.M., Senanayake, G., 2016. A Review of Ammoniacal Thiosulfate Leaching of Gold: An Update Useful for Further Research in Non-Cyanide Gold Lixiviants. Mineral Processing and Extractive Metallurgy Review, 37 (6), 385-411.
  • Zipperian, D., Raghavan, S., Wilson, J.P., 1988. Gold and Silver Extraction by Ammoniacal Thiosulfate Leaching from A Rhyolite Ore. Hydrometallurgy, 19, 361–375.
There are 108 citations in total.

Details

Primary Language Turkish
Journal Section Collection
Authors

Fırat Ahlatcı 0000-0002-4751-4725

Ersin Y. Yazıcı 0000-0002-8711-0784

Oktay Celep This is me 0000-0001-9024-4196

Hacı Deveci 0000-0003-4105-0912

Publication Date September 1, 2017
Submission Date May 23, 2017
Published in Issue Year 2017 Volume: 56 Issue: 3

Cite

APA Ahlatcı, F., Yazıcı, E. Y., Celep, O., Deveci, H. (2017). TİYOSÜLFAT İLE ALTIN VE GÜMÜŞ LİÇİNİN TEMELLERİ – BÖLÜM I. Bilimsel Madencilik Dergisi, 56(3), 117-130. https://doi.org/10.30797/madencilik.390779
AMA Ahlatcı F, Yazıcı EY, Celep O, Deveci H. TİYOSÜLFAT İLE ALTIN VE GÜMÜŞ LİÇİNİN TEMELLERİ – BÖLÜM I. Mining. September 2017;56(3):117-130. doi:10.30797/madencilik.390779
Chicago Ahlatcı, Fırat, Ersin Y. Yazıcı, Oktay Celep, and Hacı Deveci. “TİYOSÜLFAT İLE ALTIN VE GÜMÜŞ LİÇİNİN TEMELLERİ – BÖLÜM I”. Bilimsel Madencilik Dergisi 56, no. 3 (September 2017): 117-30. https://doi.org/10.30797/madencilik.390779.
EndNote Ahlatcı F, Yazıcı EY, Celep O, Deveci H (September 1, 2017) TİYOSÜLFAT İLE ALTIN VE GÜMÜŞ LİÇİNİN TEMELLERİ – BÖLÜM I. Bilimsel Madencilik Dergisi 56 3 117–130.
IEEE F. Ahlatcı, E. Y. Yazıcı, O. Celep, and H. Deveci, “TİYOSÜLFAT İLE ALTIN VE GÜMÜŞ LİÇİNİN TEMELLERİ – BÖLÜM I”, Mining, vol. 56, no. 3, pp. 117–130, 2017, doi: 10.30797/madencilik.390779.
ISNAD Ahlatcı, Fırat et al. “TİYOSÜLFAT İLE ALTIN VE GÜMÜŞ LİÇİNİN TEMELLERİ – BÖLÜM I”. Bilimsel Madencilik Dergisi 56/3 (September 2017), 117-130. https://doi.org/10.30797/madencilik.390779.
JAMA Ahlatcı F, Yazıcı EY, Celep O, Deveci H. TİYOSÜLFAT İLE ALTIN VE GÜMÜŞ LİÇİNİN TEMELLERİ – BÖLÜM I. Mining. 2017;56:117–130.
MLA Ahlatcı, Fırat et al. “TİYOSÜLFAT İLE ALTIN VE GÜMÜŞ LİÇİNİN TEMELLERİ – BÖLÜM I”. Bilimsel Madencilik Dergisi, vol. 56, no. 3, 2017, pp. 117-30, doi:10.30797/madencilik.390779.
Vancouver Ahlatcı F, Yazıcı EY, Celep O, Deveci H. TİYOSÜLFAT İLE ALTIN VE GÜMÜŞ LİÇİNİN TEMELLERİ – BÖLÜM I. Mining. 2017;56(3):117-30.

Cited By

BAKIR İÇERİĞİ YÜKSEK PİRİTİK BİR ALTIN KONSANTRESİNİN BASINÇ OKSİDASYONU
Bilimsel Madencilik Dergisi
https://doi.org/10.30797/madencilik.932319

22562 22561 22560 22590 22558