Optimization of Graphite-Mineral Oil Ratio With Response Surface Methodology in Glucose Oxidase Based Carbon Paste Electrode Design

Year 2022, , 22 - 33, 04.04.2022

Esra Yağız Gül Ozyilmaz Ali Tuncay Ozyilmaz

https://doi.org/10.28978/nesciences.1098655

Cited By: 1

Abstract

In this study, construction of amperometric glucose biosensor was carried out by immobilizing of glucose oxidase (GOD) on carbon paste electrode (CPE) which was coated with polyaniline (PANI) by cyclic voltammetry technique. Since the current values to be measured depending on the glucose concentration will be affected by the graphite:mineral oil composition of the electrode, this parametres were optimized by response surface methodology (RSM). For this, State Ease Design Expert 8.0.7.1. (Serial Number: 0021-6578) software software was used applying Optimal Design. By using data obtained, Design Expert software suggested quadratic model to predict current values in terms of working parameters. In study, experimentally measured current values and predicted values by model were considerably found compatable and suitability of model was supported by ANOVA test.

Keywords

Carbon paste electrode, Response Surface Methodology, Glucose Oxidase, biosensor, polyaniline

References

• Amiri, M., Nekoiean, K., & Bezaatpour, A. (2012). Nanomolar determination of penicillamine by using a novel cobalt/polyaniline/carbon paste nanocomposite electrode. Electroanalysis, 24, 2186–2192.
• Anik, Ü. & Çevik, S. (2009). Double-walled carbon nanotube based carbon paste electrode as xanthine biosensor. Microchimica Acta, 166,209-213.
• Aygün, A. (2012). Treatment of textile industry reactive and disperse dye bath wastewater by electrocoagulation process: optimization by response surface method.PhD Thesis.
• Comba, F. N., Rubianes, M. D., Herrasti, P. & Rivas, G. A., (2010). Glucose biosensing at carbon paste electrodes containing iron nanoparticles. Sensors and Actuators B: Chemical. 149,306–309.
• Donmez, S. (2020). A novel electrochemical glucose biosensor based on a poly (L-aspartic acid)-modified carbon-paste electrode. Preparative Biochemistry & Biotechnology. 50,961-967
• Lazic, Z. R. (2006). Design of experiments in chemical engineering: a practical guide. John Wiley & Sons.
• Li, Y., Zhou, W., Wang, H., Xie, L., Liang, Y., Wei, F., Idrobo, J. C., Pennycook, S. J. &Dai, H. (2012). An oxygen reduction electrocatalyst based on carbon nanotube–graphene complexes. Nature Nanotechnology, 7,394–400.
• Li, J., Lin, X., 2007. Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode. Biosensors and Bioelectronics, 22,2898-2995.
• Liu, H. T., He, P., Li, Z. Y., Sun, C. Y., Shi, L. H., Liu, Y., Zhu, G. Y. & Li, J. H. (2005). An ionic liquid-type carbon paste polyoxometalate-modified electrode and its properties. Electrochemistry Communications, 7 (12), 1357-1363.
• Liu, S. & Ju, H. (2003). Reagentless glucose biosensor based on direct electron transfer of glucose oxidase immobilized on colloidal gold modified carbon paste electrode. Biosensors and Bioelectronics, 19(3),177-183.
• Luque, G. L., Rodriguez, M. C. & Rivas, G. A. (2005). Glucose biosensors based on the immobilization of copper oxide and glucose oxidase within a carbon paste matrix. Talanta, 66, 467-471.
• Meng-Qin, L., Jian-Hui, J., Yun-Lan, F., Guo-Li, S. & Ru-Qin, Y. (2007). Glucose biosensor based on immobilization of glucose oxidase in electrochemically polymerized polytyramine film and overoxidised polypyrrole film on platinized carbon paste electrode. Chinese Journal of Analytical Chemistry, 35 (10), 1435-1438.
• Myers, R., H. & Montgomery D.C. (1995). Response surface methodology: process and product optimization using designed experiments. New York: John Wiley.
• Ozyilmaz, G., Ozyilmaz, A. T. & Can, F. (2011). Glucose oxidase-polypyrrole electrodes synthesized in p-toluenesulfonic acid and sodium p-toluenesulfonate. Applied Biochemistry and Microbiology, 47,196-205.
• Ozyilmaz G., Ozyilmaz A.T. & Ağçam S. (2018). Using response surface methodology for amperometric glucose biosensor construction. Natural and Engineering Sciences. 3(1), 1-15.
• Ozyilmaz G., Ozyilmaz A.T., Bayram E.I. & Akyürekoğlu R.H. (2019). Amperometric Glucose Biosensor based on homopolymer-chitosan double layered glucose oxidase electrode modified with zinc oxide nanoparticles. Acta Chimica Slovenica. 66, 950-957
• Sadeghi, S., Fooladi, E. & Malekaneh, M. (2015) A new amperometric biosensor based on Fe3O4/polyaniline/laccase/chitosan biocomposite-modified carbon paste electrode for determination of catechol in tea leaves. Applied Biochemistry and Biotechnology, 175, 1603-1616
• Shamsazar, A.,Sahmsazar, F., Asadi, A. & Rezaei-Zarchi, S. (2016). A glucose biosensor based on glucose oxidase enzyme and ZnO nanoparticles modified carbon paste electrode. International Journal of Electrochemical Science, 11, 9891-9901
• Shoja, Y., Kermanpur, A., Karimzadeh, F., Ghodsi, J., Rafati, A.A. & Adhami, S. (2019). Electrochemical molecularly bioimprinted siloxane biosensor on the basis of core/Shell silver nanoparticles/EGFR exon 21 L858R point mutant gene/siloxane film for ultra-sensing of Gemcitabine as a lung cancer chemotherapy medication. Biosensors and Bioelectronics, 145, 111611
• Svobodová, E., Baldrianová L., Hočevar S. B. & Švancara I. (2012). Electrochemical Stripping Analysis of Selected Heavy Metals at Antimony Trioxide-Modified Carbon Paste Electrode. International Journal of Electrochemical Science, 7, 197-210.
• Turan, M. D., & Altundoğan, H. S. (2011). Use of Response Surface Methods in Hydrometallurgical Research. Madencilik, 50, 11-23.