In this study, for electrochemical determination of hydrogen peroxide and investigation of its sensor performance, polythiophene doped AG@RGO was synthesized in a two-step. To characterize synthesized catalysts field emission microscopy (FESEM), energy-dispersive X-ray spectrometer (EDX), X-ray Powder Diffraction (XRD), and Uv-vis spectroscopy measurements were performed. On the other hand, electrochemical properties of catalysts were investigated by cyclic voltammetry (CV) and amperometric methods. It was noticed that Ag@rGO catalyst modified with polythiophene is higher sensitivity compared with unmodified Ag@rGO catalyst. . Limit detection value (LOD) was obtained as 0,15mM and 0,033mM (S/N=3) for Ag@rGO and Ptyf-Ag@rGO, respectively. Additionally, polythiophene not only reduced the LOD value, but also contributed to the observation of a more stable current by reducing the noise signals in the electrochemical measurements for Ag@rGO.
Bu çalışmada hidrojen peroksitin elektrokimyasal tayini için politiyofen katkılı Ag@rGO iki aşamada sentezlenerek sensör performansı incelenmiştir. Hazırlanan katalizörlerin karakterizasyonu alan emisyonlu taramalı elektron mikroskobu (FESEM) , enerji dağılım X-ışını spektroskopisi (EDX) , X-ışını kırınım spektroskopisi (XRD) ve görünür bölge (UV-vis) spektroskopisi ile gerçekleştirilmiştir. Diğer taraftan katalizörlerin elektrokimyasal özellikleri, dönüşümlü voltametri (CV) ve amperometrik yöntem ile incelenmiştir. Politiyofen (ptyf) katkılı Ag@rGO’nun katkısız Ag@rGO’ ya kıyasla hidrojen peroksite karşı daha hassas olduğu elektrokimyasal ölçümler sonrası anlaşılmıştır. Limit dedeksiyon değeri (LOD) Ag@rGO ve Ptyf-Ag@rGO için sırasıyla 0,15mM ve 0,033 mM (S/N=3) olarak elde edilmiştir. Bununla birlikte politiyofen sadece LOD değerini düşürmekle kalmamış, Ag@rGO için yapılan ölçümlerdeki gürültü sinyallerini azaltarak daha kararlı bir akım gözlenmesine de katkı sağlamıştır
Primary Language | Turkish |
---|---|
Subjects | Chemical Engineering |
Journal Section | RESEARCH ARTICLES |
Authors | |
Publication Date | July 5, 2023 |
Submission Date | April 29, 2022 |
Acceptance Date | November 6, 2022 |
Published in Issue | Year 2023 Volume: 6 Issue: 2 |
*This journal is an international refereed journal
*Our journal does not charge any article processing fees over publication process.
* This journal is online publishes 5 issues per year (January, March, June, September, December)
*This journal published in Turkish and English as open access.
* This work is licensed under a Creative Commons Attribution 4.0 International License.