Abstract
References
- Birgün, S., Gülen, K. G., Özkan, K. (2006). Yalın üretime geçiş sürecinde değer akışı haritalama tekniğinin kullanilmasi: imalat sektöründe bir uygulama. İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi, 5(9), 47-59.
- Gupta, S., Jain, S. K. (2013). A literature review of lean manufacturing. International Journal of Management Science and Engineering Management, 8(4), 241-249.
- Karim, A., Arif-Uz-Zaman, K. (2013). A methodology for effective implementation of lean strategies and its performance evaluation in manufacturing organizations. Business Process Management Journal, 19(1), 169-196.
- Kılıç, A., Ayvaz, B. (2016). Türkiye otomotiv yan sanayinde yalın üretim uygulaması. İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi, 15(29), 29-60.
Abstract
Purpose- This project aims to analyze and improve the production processes of grab bars which is one of the bill materials of buses that are manufactured in one of the leading automotive companies.
Methodology- Value Stream Mapping is used to understand production processes of grab bars for the existing state. Based on this analysis, important parameters such as cycle times, process times are recorded. Then by the help of lean approach, points that can be improved are determined. Due to the these suggestions, a new production process is proposed. To check the validity of the proposed production process, it is run with ARENA Software. As last, Value Stream Mapping is re-designed to display the improvements on the parameters.
Findings- Many parameters of production process of current state are improved by applying the lean approaches and validated via ARENA simulation. According to future state ARENA model, the number of completed bars has increased by 24% and the number of defected bars has decreased by %50.
Conclusion- The main contribution of this study is in two-folds. Firstly, the production process of grab bars is analyzed in detail and represented by Value Stream Mapping. Secondly, Lean Approach is employed to improve the existing grab production processes.
References
- Birgün, S., Gülen, K. G., Özkan, K. (2006). Yalın üretime geçiş sürecinde değer akışı haritalama tekniğinin kullanilmasi: imalat sektöründe bir uygulama. İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi, 5(9), 47-59.
- Gupta, S., Jain, S. K. (2013). A literature review of lean manufacturing. International Journal of Management Science and Engineering Management, 8(4), 241-249.
- Karim, A., Arif-Uz-Zaman, K. (2013). A methodology for effective implementation of lean strategies and its performance evaluation in manufacturing organizations. Business Process Management Journal, 19(1), 169-196.
- Kılıç, A., Ayvaz, B. (2016). Türkiye otomotiv yan sanayinde yalın üretim uygulaması. İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi, 15(29), 29-60.
Details
| Primary Language | English |
|---|---|
| Journal Section | Articles |
| Authors | |
| Publication Date | September 1, 2018 |
| Published in Issue | Year 2018 |
Cite
PressAcademia Procedia (PAP) publishes proceedings of conferences, seminars and symposiums. PressAcademia Procedia aims to provide a source for academic researchers, practitioners and policy makers in the area of social and behavioral sciences, and engineering.
PressAcademia Procedia invites academic conferences for publishing their proceedings with a review of editorial board. Since PressAcademia Procedia is an double blind peer-reviewed open-access book, the manuscripts presented in the conferences can easily be reached by numerous researchers. Hence, PressAcademia Procedia increases the value of your conference for your participants.
PressAcademia Procedia provides an ISBN for each Conference Proceeding Book and a DOI number for each manuscript published in this book.
PressAcademia Procedia is currently indexed by DRJI, J-Gate, International Scientific Indexing, ISRA, Root Indexing, SOBIAD, Scope, EuroPub, Journal Factor Indexing and InfoBase Indexing.
Please contact to procedia@pressacademia.org for your conference proceedings.