Abstract
In this
study, constant-impedance, constant-current and constant-power ZIP models have
been analyzed for residental loads. Measurement based approach has been used to
obtain ZIP models of selected loads. The measurement-based approach for load
modeling is important because it reflects the real dynamics of the system and
represents the load characteristics more accurately. The ZIP model is used to
estimate the power drawn by the load depending on the voltage changes. Since
the ZIP load model is a well-known model that provides power dependence in
terms of the physical sense of voltage, studies are taking place in this area.
In this study, the voltage and power values of selected residental loads at YTU
Smart Home Laboratory are measured. Then, the ZIP coefficients have been
calculated by using the least squares algorithm developed in MATLAB. The
measured data is compared with the data from the obtained ZIP model for each
appliance.
References
- B. Zhao, Y. Tang, W. Zhang, and Q. Wang, “Modeling of common load components in power system based on dynamic simulation experiments,” in Proc. Int. Conf. Power Syst. Technol., 2010, pp. 1–7.
- K. Rudion, H. Abildgard, Z.A. Styczynski ''Non-linear load modeling — Requirements and preparation for measurement,'' Power & Energy Society General Meeting, 2009, pp. 1–5.
- M. Sadeghi and G. A. Sarvi, “Determination of ZIP parameters with least squares optimization method,” in Elect. Power Energy Conf., 2009, pp. 1–6.
- A. Bokhari, A. Alkan, R. Dogan, M. D.-Aguiló, F. León, D. Czarkowski, L. Birenbaum, A. Noel, R. E. Uosef, ‘’ Experimental Determination of the ZIP Coefficients for Modern Residential, Commercial, and Industrial Loads’’, IEEE Transactıons On Power Delıvery, Vol. 29, No. 3, June 2014.
- F. L. Quilumba, W. Lee, H. Huang, D. Y. Wang, and R. L. Szabados, “Load model development for next generation appliances,” in Proc. Ind. Appl. Soc. Annu. Meeting, 2011, pp. 1–7.
Abstract
References
- B. Zhao, Y. Tang, W. Zhang, and Q. Wang, “Modeling of common load components in power system based on dynamic simulation experiments,” in Proc. Int. Conf. Power Syst. Technol., 2010, pp. 1–7.
- K. Rudion, H. Abildgard, Z.A. Styczynski ''Non-linear load modeling — Requirements and preparation for measurement,'' Power & Energy Society General Meeting, 2009, pp. 1–5.
- M. Sadeghi and G. A. Sarvi, “Determination of ZIP parameters with least squares optimization method,” in Elect. Power Energy Conf., 2009, pp. 1–6.
- A. Bokhari, A. Alkan, R. Dogan, M. D.-Aguiló, F. León, D. Czarkowski, L. Birenbaum, A. Noel, R. E. Uosef, ‘’ Experimental Determination of the ZIP Coefficients for Modern Residential, Commercial, and Industrial Loads’’, IEEE Transactıons On Power Delıvery, Vol. 29, No. 3, June 2014.
- F. L. Quilumba, W. Lee, H. Huang, D. Y. Wang, and R. L. Szabados, “Load model development for next generation appliances,” in Proc. Ind. Appl. Soc. Annu. Meeting, 2011, pp. 1–7.
Details
| Journal Section | Articles |
|---|---|
| Authors | |
| Publication Date | June 30, 2017 |
| Published in Issue | Year 2017 Volume: 5 Issue: 1 |
Cite
PressAcademia Procedia (PAP) publishes proceedings of conferences, seminars and symposiums. PressAcademia Procedia aims to provide a source for academic researchers, practitioners and policy makers in the area of social and behavioral sciences, and engineering.
PressAcademia Procedia invites academic conferences for publishing their proceedings with a review of editorial board. Since PressAcademia Procedia is an double blind peer-reviewed open-access book, the manuscripts presented in the conferences can easily be reached by numerous researchers. Hence, PressAcademia Procedia increases the value of your conference for your participants.
PressAcademia Procedia provides an ISBN for each Conference Proceeding Book and a DOI number for each manuscript published in this book.
PressAcademia Procedia is currently indexed by DRJI, J-Gate, International Scientific Indexing, ISRA, Root Indexing, SOBIAD, Scope, EuroPub, Journal Factor Indexing and InfoBase Indexing.
Please contact to procedia@pressacademia.org for your conference proceedings.