Conversion of Cellulose to 5-HMF in the Presence of Silica-Alumina Catalysts Synthesized by Dual Template at Low Temperature

Year 2023, Volume: 27 Issue: 4, 781 - 791, 25.08.2023

Halit Levent Hoşgün , Özlem Topçu , Emir Zafer Hoşgün , Berrin Bozan

https://doi.org/10.16984/saufenbilder.1172543

Cited By: 1

Abstract

In this study, which incorporates many principles of green chemistry (use of renewable feedstocks, catalysis, improvement of energy efficiency, and harmless solvents and auxiliaries), the single-phase catalytic conversion of cellulose to 5-HMF in over silica-alumina catalysts was investigated. A series of dual-template silica-alumina catalysts with CTAB as the main template and F127 or triethylamine (TEA) as the co-template were synthesized at a low temperature of 60 °C and characterized by XRD, N2 adsorption-desorption technique, FT-IR and pyridine adsorption FT-IR. The surface area is increased by using the second template in silica-alumina catalyst. In addition, the acidity of the surface was changed by using the second template. The cellulose conversion and yield of 5-HMF increased from 36% to 52% and from 3.13% to 4.24%, respectively, due to the properties gained by using the second template. 52% cellulose conversion and 8.13% selectivity of 5-HMF were obtained in aqueous medium, 220 °C and 6 h reaction time with the catalyst using TEA as co-template. Eco-friendly silica catalysts synthesized at low temperatures with a dual template can be considered as a potential alternative for the conversion of cellulose into value-added biobased products.

Keywords

Cellulose, 5-HMF, heterogeneous catalysis, green chemistry

References

• L. T. Mika, E. Cséfalvay, Á. Németh, “Catalytic Conversion of Carbohydrates to Initial Platform Chemicals: Chemistry and Sustainability”, Chemical Reviews, vol. 118, no. 2, pp. 505-613, 2018.
• F. A. Kucherov, L. V. Romashov, G. M. Averochkin, V. P. Ananikov, “Biobased C6 -Furans in Organic Synthesis and Industry: Cycloaddition Chemistry as a Key Approach to Aromatic Building Blocks”, ACS Sustainable Chemistry & Engineering, vol. 9, no. 8, pp. 3011-3042, 2021.
• S. Van de Vyver, J. Geboers, P. A. Jacobs, B. F. Sels, “Recent Advances in the Catalytic Conversion of Cellulose”, ChemCatChem, vol. 3, no. 1, pp. 82-94, 2011.
• A. Guleria, G. Kumari, S. Saravanamurugan, “Cellulose valorization to potential platform chemicals”, In Biomass, Biofuels, Biochemicals, S. Saravanamurugan, A. Pandey, H. Li, A. Riisager Elsevier, 2020, pp. 433-457.
• F. Delbecq C. Len, “Recent Advances in the Microwave-Assisted Production of Hydroxymethylfurfural by Hydrolysis of Cellulose Derivatives—A Review”, Molecules, vol. 23, no. 8, pp. 1973, 2018.
• Y. Zhao, S. Wang, H. Lin, J. Chen, H. Xu, “Influence of a Lewis acid and a Brønsted acid on the conversion of microcrystalline cellulose into 5-hydroxymethylfurfural in a single-phase reaction system of water and 1,2-dimethoxyethane”, RSC Advances, vol. 8, no. 13, pp. 7235-7242, 2018.
• H. Abou-Yousef, E. B. Hassan, P. Steele, “Rapid conversion of cellulose to 5-hydroxymethylfurfural using single and combined metal chloride catalysts in ionic liquid”, Journal of Fuel Chemistry and Technology, vol. 41, no. 2, pp. 214-222, 2013.
• L. Zhang, Y. Tian, Y. Wang, L. Dai, “Enhanced conversion of α-cellulose to 5-HMF in aqueous biphasic system catalyzed by FeCl3-CuCl2”, Chinese Chemical Letters, vol. 32, no. 7, pp.2233-2238, 2021.
• J. Shen C. E. Wyman, “Hydrochloric acid-catalyzed levulinic acid formation from cellulose: data and kinetic model to maximize yields”, AIChE Journal, vol. 58, no. 1, pp. 236-246, 2012.
• L. Zhou, R. Liang, Z. Ma, T. Wu, Y. Wu, “Conversion of cellulose to HMF in ionic liquid catalyzed by bifunctional ionic liquids”, Bioresource Technology, vol. 129, pp. 450-455, 2013.
• M. Wu, M. Huang, L. Chen, Q. Ma, J. Zhou, “Direct conversion of cellulose to 5-hydroxymethylfurfural over SnNb2O6–ZrO2 catalyst”, Reaction Kinetics, Mechanisms and Catalysis, vol. 130, no. 2, pp. 903-918, 2020.
• K. Y. Nandiwale, N. D. Galande, P. Thakur, S. D. Sawant, V. P. Zambre, V. V. Bokade, “One-Pot Synthesis of 5-Hydroxymethylfurfural by Cellulose Hydrolysis over Highly Active Bimodal Micro/Mesoporous H-ZSM-5 Catalyst”, ACS Sustainable Chemistry & Engineering, vol. 2, no. 7, pp. 1928-1932, 2014.
• X. Li, K. Peng, Q. Xia, X. Liu, Y. Wang, “Efficient conversion of cellulose into 5-hydroxymethylfurfural over niobia/carbon composites”, Chemical Engineering Journal, vol. 332, pp. 528-536, 2018.
• G. Fan, Y. Wang, Z. Hu, J. Yan, J. Li, G. Song, “Synthesis of 5-hydroxymethyl furfural from cellulose via a two-step process in polar aprotic solvent”, Carbohydrate Polymers, vol. 200, pp. 529-535, 2018.
• Y. Han, L. Ye, X. Gu, P. Zhu, X. Lu, “Lignin-based solid acid catalyst for the conversion of cellulose to levulinic acid using γ-valerolactone as solvent”, Industrial Crops and Products, vol. 127, pp. 88-93, 2019.
• A. Ishihara, “Preparation of Amorphous Silica-Alumina Using the Sol–Gel Method and its Reactivity for a Matrix in Catalytic Cracking”, Catalysis Survey Asia, vol. 16, no. 1, pp. 36-47, 2012.
• F. Nadolny, B. Hannebauer, F. Alscher, S. Peitz, W. Reschetilowski, R. Franke, “Experimental and theoretical investigation of heterogeneous catalyzed oligomerization of a mixed C4 stream over modified amorphous aluminosilicates”, Journal of Catalysis, vol. 367, pp. 81-94, 2018.
• R. E. Nugraha, D. Prasetyoko, N. Asikin-Mijan, H. Bahruji, S. Suprapto, Y. H. Taufiq-Yap, A. Abdul Jalil, “The effect of structure directing agents on micro/mesopore structures of aluminosilicates from Indonesian kaolin as deoxygenation catalysts”, Microporous and Mesoporous Materials, vol. 315, pp. 110917, 2021.
• H. Taghvaei, A. Moaddeli, A. Khalafi-Nezhad, A. Iulianelli, “Catalytic hydrodeoxygenation of lignin pyrolytic-oil over Ni catalysts supported on spherical Al-MCM-41 nanoparticles: Effect of Si/Al ratio and Ni loading”, Fuel, vol. 293, p. 120493, 2021.
• P. Sadeghpour, M. Haghighi, A. Ebrahimi, “Ultrasound-assisted rapid hydrothermal design of efficient nanostructured MFI-Type aluminosilicate catalyst for methanol to propylene reaction”, Ultrasonics Sonochemistry, vol. 72, pp. 105416, 2021.
• M. Zabeti, T. S. Nguyen, L. Lefferts, H. J. Heeres, K. Seshan, “In situ catalytic pyrolysis of lignocellulose using alkali-modified amorphous silica alumina”, Bioresource Technology, vol. 118, pp. 374-381, 2012.
• Y. Zhai, P. Zhu, S. Li, C. Zhang, Z. Li, X. Xu, G. Chen, Z. Tan, R. Zhang, Y. Liu, “Hydrotreatment of bio-oil over Pd-based catalysts”, Journal of Renewable and Sustainable Energy, vol. 6, no. 4, pp. 043129, 2014.
• S. T. Pham,M. B. Nguyen, G. H. Le, T. T. T. Pham, T. T. T. Quan, T. D. Nguyen, T. L. Son, T. A. Vu, “Cellulose Conversion to 5 Hydroxymethyl Furfural (5-HMF) Using Al-Incorporated SBA-15 as Highly Efficient Catalyst”, Journal of Chemistry, vol. 2019, pp. 1-8, 2019.
• S. T. Pham,M. B. Nguyen, G. H. Le, T. D. Nguyen, C. D. Pham, T. S. Le, T. A. Vu, “Influence of Brønsted and Lewis acidity of the modified Al-MCM-41 solid acid on cellulose conversion and 5-hydroxylmethylfurfuran selectivity”, Chemosphere, vol. 265, pp. 129062, 2021.
• X. Yan, B. Liu, J. Huang, Y. Wu, H. Chen, H. Xi, “Dual Template Preparation of MFI Zeolites with Tuning Catalytic Properties in Alkylation of Mesitylene with Benzyl Alcohol”, Industrial & Engineering Chemistry Research, vol. 58, no. 8, pp. 2924-2932, 2019.
• S. Bosnar, V. Rac, D. Stošić, A. Travert, G.Postole, A. Auroux, S. Škapin, L. Damjanović-Vasilić, J. Bronić, X. Du, S. Marković, V. Pavlović, V. Rakić, “Overcoming phase separation in dual templating: A homogeneous hierarchical ZSM-5 zeolite with flower-like morphology, synthesis and in-depth acidity study”, Microporous and Mesoporous Materials, vol. 329, pp. 111534, 2022.
• W. Wang, J. Xie, P. Wang, L. Chen, C. Au, S. Yin, “Dual-template synthesis of HZSM-5 zeolites with tailored activity in toluene methylation with CH3Br”, Chinese Journal of Chemical Engineering, vol. 27, no. 8, pp. 1846-1850, 2019.
• Y. Tu, T. Zhan, T. Wu, F. Zhang, I. Kumakiri, X. Chen, H. Kita, “Rapid synthesis of AlPO-18 molecular sieve for gas separation with dual-template agent”, Microporous and Mesoporous Materials, vol. 327, pp. 111436, 2021.
• L. Sun, W. Zhang, Z. Li, M. Yang, Y. Wang, X. Zhang, P. Tian, Z. Liu, “Dual-template directed aminothermal syntheses and characterization of silicoaluminophosphates SAPO-CLO and ECR-40”, Microporous and Mesoporous Materials, vol. 315, pp. 110915, 2021.
• Q. Miao, X. Huang, J. Li, Y. Duan, L. Yan, Y. Jiang, S. Lu, “Hierarchical macro-mesoporous Mo/Al2O3 catalysts prepared by dual-template method for oxidative desulfurization”, Journal Porous Materials, vol. 28, no. 6, pp. 1895-1906, 2021.
• T. Kaneko, F. Nagata, S. Kugimiya, K. Kato, “Morphological control of mesoporous silica particles by dual template method”, Ceramics International, vol. 44, no. 16, pp. 20581-20585, 2018.
• Q. Wang, H. Wang, Y. Wu, L. Cheng, L. Zhu, J. Zhu, Z. Li, Y. Ke, “Pore size control of monodisperse silica particles by dual template sol–gel method”, Journal of Sol-Gel Science and Technology, vol. 94, no. 1, pp. 186-194, 2020.
• L. Du, H. Song, S. Liao, “Tuning the morphology of mesoporous silica by using various template combinations”, Applied Surface Science, vol. 255, no. 23, pp. 9365-9370, 2009.
• L. Emdadi, Y. Wu, G. Zhu, C.-C. Chang, W. Fan, T. Pham, R. F. Lobo, D. Liu, “Dual Template Synthesis of Meso- and Microporous MFI Zeolite Nanosheet Assemblies with Tailored Activity in Catalytic Reactions”, Chemistry of Materials, vol. 26, no. 3, pp. 1345-1355, 2014.
• M. Wang, X. Wang, Q. You, Y. Wu, X. Yang, H. Chen, B. Liu, Q. Hao, J. Zhang, X. Ma, “Dual-template synthesis of hierarchically layered titanosilicate-1 zeolites for catalytic epoxidation of cyclooctene”, Microporous and Mesoporous Materials, vol. 323, pp. 111207, 2021.
• J. Shi, Y. Chen, T. Liu, H. Liang, “Preparation of mesoporous γ-Al2O3 catalysts by dual template method”, Journal of Dispersion Science and Technology, vol. 41, no. 10, pp. 1471-1479, 2020.
• V. Şimşek, “Investigation of Catalytic Sustainability of Silica-Based Mesoporous Acidic Catalysts and Ion-Exchange Resins in Methyl Acetate Synthesis and Characterizations of Synthesized Catalysts”, Arabian Journal for Science and Engineering, vol. 44, no. 6, pp. 5301-5310, 2019.
• A. Yüksel, “Levulinik Asit Üretimi İçin Selülozun Sıcak-Basınçlı Suda Hidrotermal Muamelesi”, Uludağ University Journal of The Faculty of Engineering, vol. 21, no. 2, pp. 415-415, 2016.
• D. M. Oliveira A. S. Andrada, “Synthesis of ordered mesoporous silica MCM-41 with controlled morphology for potential application in controlled drug delivery systems”, Cerâmica, vol. 65, no. 374, pp. 170-179, 2019.
• S. Musić, N. Filipović-Vinceković, L. Sekovanić, “Precipitation of amorphous SiO2 particles and their properties”, Brazilian Journal of Chemical Engineering, vol. 28, no. 1, pp. 89-94, 2011.
• R. Maddalena, C. Hall, A. Hamilton, “Effect of silica particle size on the formation of calcium silicate hydrate [C-S-H] using thermal analysis”, Thermochimica Acta, vol. 672, pp. 142-149, 2019.
• S. T. Pham, M. B. Nguyen, G. H. Le, T. T. T. Pham, T. T. T. Quan, T. D. Nguyen, T. L. Son, T. A. Vu, “Cellulose Conversion to 5 Hydroxymethyl Furfural (5-HMF) Using Al-Incorporated SBA-15 as Highly Efficient Catalyst”, Journal of Chemistry, vol. 2019, pp. 1-8, 2019.
• B. K. Singh, R. Tomar, S. Kumar, A. Jain, B. S. Tomar, V. K. Manchanda, “Sorption of 137Cs, 133Ba and 154Eu by synthesized sodium aluminosilicate (Na-AS)”, Journal of Hazardous Materials, vol. 178, no. 1-3, pp. 771-776, 2010.
• Y. Liu, F. Zeng, B. Sun, P. Jia, I. T. Graham, “Structural Characterizations of Aluminosilicates in Two Types of Fly Ash Samples from Shanxi Province, North China”, Minerals, vol. 9, no. 6, pp. 358, 2019.
• J. Zheng, J. Ma, Y. Wang, Y. Bai, X. Zhang, R. Li, “Synthesis and Catalytic Property of a Zeolite Composite for Preparation of Dimethyl Ether from Methanol Dehydration”, Catalysis Letters, vol. 130, no. 3-4, pp. 672-678, 2009.
• E. Soghrati, T. K. C. Ong, C. K. Poh, S. Kawi, A. Borgna, “Zeolite–supported nickel phyllosilicate catalyst for C O hydrogenolysis of cyclic ethers and polyols”, Applied Catalysis B: Environmental, vol. 235, pp. 130-142, 2018.
• U. Tyagi, N. Anand, D. Kumar, “Synergistic effect of modified activated carbon and ionic liquid in the conversion of microcrystalline cellulose to 5-Hydroxymethyl Furfural”, Bioresource Technology, vol. 267, pp. 326-332, 2018.
• F. Lai, F. Yan, P. Wang, S. Wang, S. Li, Z. Zhang, “Highly efficient conversion of cellulose into 5-hydroxymethylfurfural using temperature-responsive ChnH5-nCeW12O40 (n = 1–5) catalysts”, Chemical Engineering Journal, vol. 396, pp. 125282, 2020.
• S. Zhao, M. Cheng, J. Li, J. Tian, X. Wang, “One pot production of 5-hydroxymethylfurfural with high yield from cellulose by a Brønsted–Lewis–surfactant-combined heteropolyacid catalyst”, Chemical Communications, vol. 47, no. 7, pp. 2176, 2011.