The Use of Hose Reel Irrigation Machines and Energy Efficient Components in Irrigation

Year 2024, , 55 - 63, 23.07.2024

Turgay Polat , Ahmet Çolak

https://doi.org/10.21657/soilst.1520606

Abstract

The energy consumed for irrigation is one of the most important inputs in crop production. Irrigation water is distributed within the parcel with minimum loss by using winged or gun systems together with a hose reel irrigation machine (HRIM). The increase in the amount of energy consumed for irrigation increases the cost of the unit product. To reduce the unit product cost, irrigation systems must be used with energy-efficiency units. Frequency converters (FC), pressure transmitters (PT), and programmable logic controllers (PLC) are among the components used to provide energy efficiency. A change in the amount of current drawn by the motors according to the changes in the required flow rate in the pumping facilities is possible by using FC, PT, and PLC. In addition, with more than one motor pump pair; it is necessary to use FC and PLC to be used by connecting in parallel, to operate with the principle of co-aging, and to make a soft start. Instantaneous pressure information is transmitted to PLC and FC via a PT to be installed on the collector in the discharge line in systems with parallel-connected pumps. In this way, the motor revolutions used to drive the pumps are changed via FC, in real-time according to the changes in the flow. Thus, pump-motor pairs are operated with the principle of "constant pressure variable flow" and energy savings are achieved.

Keywords

Hose reel irrigation machine, Pumping plant, Programmable logic controller, Frequency converter, Pressure tranmitter

References

• Anonymous, (2023a). Su Verimliliği Seferberliği. Türk Tarım Orman Dergisi Ocak-Şubat 2023. 275, 6-9 ISSN:2651, 303x.http://www.turktarim.gov.tr/EDergi/275/mobile/html5forpc.html
• Anonymous, (2023b). MBS 3000 series, general purpose pressure transmitters. Danfoss Engineering Tomorrow. https://www.danfoss.com/en/products/sen/sensors-and-transmitters/industrial-pressure-transmitters/mbs-3000-series/#tab-learning
• Anonymous, (2009c). PİLSA Polietilen (PE100) Boruların Üstünlükleri. Polietilen Borular PİLSA Plastik Sanayi A.Ş. Rev. No: 000 Haziran 2009, pp 14.
• Anonymous, (2023d). Pille Çalışan Elektromanyetik Su Sayacı. ITRON SharpFlow https://www.manas.com.tr/ Cozumler/su-sayaclari-moduller/mekanik-sayaclar-itron-sharpflow.
• Atay, Ü., Işıker, Y., & Yeşilata, B. (2009). Fotovoltaik Güç Destekli Mikro Sulama Sistemi Projesi-1: Genel Esaslar. V. Yenilenebilir Enerji Kaynakları Sempozyumu, 57-62.
• Atay, Ü., Işıker, Y., & Yeşilata, B. (2011). Güneş enerjili damla sulama sistemi arazi performansının deneysel değerlendirilmesi. TMMOB Makina Mühendisleri Odası, Güneş Enerjisi Sistemleri Sempozyumu ve Sergisi Kitabı, 7-8.
• Atay, Ü., Işıker, Y., Yeşilata, B., & Çıkman, A. (2012). Sabit Güneş Pilli Sulama Sisteminin Performans Analizi. Tarım Makinaları Bilimi Dergisi, 8(2), 153-159.
• Balta, M.A. (2023). DSİ’den 42 Milyar TL Yatırım Hedefi. Türk Tarım Orman Dergisi Ocak-Şubat 2023 Sayı: 275, 10-13 ISSN:2651 – 303x.
• Burt, C. M. (1995). Fertigation-The next frontier. Irrigation business and technology, 3(4), 16.
• Çiftçi, V. (2008). Su Sayaçları Kalibrasyonu, İzlenebilirliğinin Sağlanması ve Yasal Metroloji Açısından Önemi. VII. Ulusal Ölçümbilim Kongresi. pp 433-444, İzmir, Türkiye.
• Gül, A. (2023). Dijital tarımla gelen fırsat. 09 Mayıs 2023 Tarihli Dünya Gazetesi Köşe yazısı. https://www.dunya.com/kose-yazisi/dijital-tarimla-gelen-firsat/693252
• Karaçor, M., & Keleş, K. (2007). Otomasyon sistemlerinin bileşenleri. VI. Otomasyon Sempozyumu, Samsun, Türkiye.
• Kün, E. (1994). Tahıllar 2 (Sıcak İklim Tahılları). Ankara Üniversitesi Ziraat Fakültesi Yayın No: 1360, Ders Kitabı: 394. 3. Press. pp 37.
• Özbek, A.K. (2023). Türkiye’de meteorolojik kuraklık Tarımsal Kuraklığa Dönüşmedi. Türk Tarım Orman Dergisi Ocak-Şubat 2023. 275, 18-21. 465 ISSN: 2651 – 303x.
• Polat, T., Çolak, A., Dayıoğlu, M. A., & Apaydın, H. (2022). Determination of the working performance of a new fertigation system developed for hose reel irrigation machine. Soil Studies, 11(1), 12-18. http://doi.org/10.21657/topraksu.1030604
• Polat, T. & Çolak, A. (2022). Otomatik Tamburlu Sulama Makinaları için Fertigasyon Sistemi Tasarımı ve Prototip İmalatı. Ankara University, Institute of Science and Technology, Department of Agricultural Machinery and Technology Engineering. Doctoral thesis.
• Polat, T. & Bowler, L. (2010). Fotograflar ve Düşey Milli Pompa Detay Resmi. Tarla Bitkileri Merkez Araştırma Enstitüsü’nde Çekilen Fotograflar ve Layne Bowler Pompa Sanayi A.Ş Tarafından Çizilen 17652 Numaralı Teknik Resim.
• Shankar, V. K. A., Umashankar, S., Paramasivam, S., & Hanigovszki, N. (2016). A comprehensive review on energy efficiency enhancement initiatives in centrifugal pumping system. Applied Energy, 181, 495-513. http://doi.org/10.1016/j.apenergy.2016.08.070
• Şen, Z. (2009). Global warming threat on water resources and environment: a review. Environmental geology, 57, 321-329. http://doi.org/10.1007/s00254-008-1569-5
• Yimchoy, S., & Supatti, U. (2021). An Energy-Savings Evaluation Method for Variable-Frequency-Drive Applications on Water Pump Systems. In 2021 24th International Conference on Electrical Machines and Systems (ICEMS) (pp. 603-608). IEEE. http://doi.org/10.1109/TIA.2013.2271991
• Yükçü, S., & Atağan, G. (2009). Etkinlik, Etkililik Ve Verimlilik Kavramlarinin Yarattiği Karişiklik. Atatürk Üniversitesi İktisadi ve İdari Bilimler Dergisi, 23(4), 1-13.