NUMERICAL ANALYSIS OF NATURAL CONVECTION IN A HEATED ROOM AND ITS IMPLICATION ON THERMAL COMFORT

Year 2021, , 37 - 53, 01.01.2021

A. Anthony Tikendra Verma

https://doi.org/10.18186/thermal.840007

Cited By: 2

Abstract

A heated room is numerically analyzed to study thermal comfort. Cold air flowing in from the inlet gets heated by a heat source (placed just below the inlet), before being distributed throughout the room. The presence of the heat source and a high Rayleigh number causes the flow of air to be buoyant and turbulent. Two RANS based turbulence models, RNG k-ε and k-ω SST turbulence models are used to model turbulence and the Discrete Ordinate (DO) radiation model is used to model radiation heat transfer between different surfaces in the room. In order to account for buoyant air movement, air is approximated as a Boussinesq fluid. Parameters that affect comfort such as comfort temperature, operative temperature, turbulence intensity, velocity and the temperature difference between the head and ankle level are investigated. It is found that the comfort temperature and operative temperature predicted in this study have similar profiles irrespective of the turbulence models. Predicted values of turbulence intensity and velocity were low, which shows a low risk of drought in the occupied zone. The two RANS models give results similar to earlier studies that were performed with different turbulence and radiation models, proving their robustness and viability for a variety of flow problems.

Keywords

Natural Convection, Turbulence Intensities, Comfort Temperature

References

• [1] Fanger PO. Assessment of thermal comfort practice. Occup Environ Med 1973;30:313–24. https://doi.org/10.1136/oem.30.4.313.
• [2] Olesen BW, Mortensen E, Thorshauge J, Berg-Munch B. Thermal Comfort in a Room Heated by Different Methods - Technical paper no. 2256. Los Angeles Meet ASHRAE Trans 86 1980:34–48.
• [3] Turner SC, Paliaga G, Lynch BM, Arens EA, Aynsley RM, Brager GS, et al. Standard 55-2010 Thermal environmental conditions for human occupancy, Atlanta, GA 2010;2010:30.
• [4] Sarafraz MM, Hormozi F. Forced convective and nucleate flow boiling heat transfer to alumina nanofluids. Period Polytech Chem Eng 2014. https://doi.org/10.3311/PPch.2206.
• [5] Sarafraz MM, Hormozi F, Silakhori M, Peyghambarzadeh SM. On the fouling formation of functionalized and non-functionalized carbon nanotube nano-fluids under pool boiling condition. Appl Therm Eng 2016. https://doi.org/10.1016/j.applthermaleng.2015.11.071.
• [6] Nakhjavani M, Nikkhah V, Sarafraz MM, Shoja S, Sarafraz M. Green synthesis of silver nanoparticles using green tea leaves: Experimental study on the morphological, rheological and antibacterial behaviour. Heat Mass Transf Und Stoffuebertragung 2017. https://doi.org/10.1007/s00231-017-2065-9.
• [7] Sarafraz MM, Nikkhah V, Madani SA, Jafarian M, Hormozi F. Low-frequency vibration for fouling mitigation and intensification of thermal performance of a plate heat exchanger working with CuO/water nanofluid. Appl Therm Eng 2017. https://doi.org/10.1016/j.applthermaleng.2017.04.083.
• [8] Sarafraz MM, Nikkhah V, Madani SA, Jafarian M, Hormozi F. Low-frequency vibration for fouling mitigation and intensification of thermal performance of a plate heat exchanger working with CuO/water nanofluid. Appl Therm Eng 2017. https://doi.org/10.1016/j.applthermaleng.2017.04.083.
• [9] Safaei MR, Rahmanian B, Goodarzi M. Numerical study of laminar mixed convection heat transfer of power-law non-Newtonian fluids in square enclosures by finite volume method. Int J Phys Sci 2011;6:7456–70. https://doi.org/https://doi.org/10.5897/IJPS11.1092.
• [10] Safaei M, Goodarzi M, Mohammadi M. Numerical modeling of turbulence mixed convection heat transfer in air filled enclosures by finite volume method. Int J Multiphys 2011. https://doi.org/10.1260/1750-9548.5.4.307.
• [11] Goodarzi M, Safaei MR, Karimipour A, Hooman K, Dahari M, Kazi SN, et al. Comparison of the finite volume and lattice boltzmann methods for solving natural convection heat transfer problems inside cavities and enclosures. Abstr Appl Anal 2014. https://doi.org/10.1155/2014/762184.
• [12] Goodarzi M, Safaei MR, Oztop HF, Karimipour A, Sadeghinezhad E, Dahari M, et al. Numerical study of entropy generation due to coupled laminar and turbulent mixed convection and thermal radiation in an enclosure filled with a semitransparent medium. Sci World J 2014. https://doi.org/10.1155/2014/761745.
• [13] Nikkhah V. Application of Spherical Copper Oxide (II) Water Nano-fluid as a Potential Coolant in a Boiling Annular Heat Exchanger. Chem Biochem Eng Q 2015. https://doi.org/10.15255/CABEQ.2014.2069.
• [14] Goodarzi M, D’Orazio A, Keshavarzi A, Mousavi S, Karimipour A. Develop the nano scale method of lattice Boltzmann to predict the fluid flow and heat transfer of air in the inclined lid driven cavity with a large heat source inside, Two case studies: Pure natural convection & mixed convection. Phys A Stat Mech Its Appl 2018. https://doi.org/10.1016/j.physa.2018.06.013.
• [15] Goodarzi. M, Safaei. M.R, Vafai.K, Ahmadi. G, Dahari. M, Kazi. S.N JN. Investigation of nanofluid mixed convection in a shallow cavity using a two-phase mixture model n.d.
• [16] Mou B, He BJ, Zhao DX, Chau KW. Numerical simulation of the effects of building dimensional variation on wind pressure distribution. Eng Appl Comput Fluid Mech 2017. https://doi.org/10.1080/19942060.2017.1281845.
• [17] Akbarian E, Najafi B, Jafari M, Ardabili SF, Shamshirband S, Chau K. Experimental and computational fluid dynamics-based numerical simulation of using natural gas in a dual-fueled diesel engine. Eng Appl Comput Fluid Mech 2018;12:517–34. https://doi.org/https://doi.org/10.1080/19942060.2018.1472670.
• [18] Ramezanizadeh M, Nazari MA, Ahmadi MH, Chau K. Experimental and numerical analysis of a nanofluidic thermosyphon heat exchanger. Eng Appl Comput Fluid Mech 2019;13:40–7. https://doi.org/https://doi.org/10.1080/19942060.2018.1518272.
• [19] Wu CL, Chau KW. Mathematical model of water quality rehabilitation with rainwater utilisation: a case study at Haigang. Int J Environ Pollut 2006;28. https://doi.org/https://doi.org/10.1504/IJEP.2006.011227.
• [20] Ardabili SF, Najafi B, Shamshirband S, Bidgoli BM, Deo RC, Chau KW. Computational intelligence approach for modeling hydrogen production: A review. Eng Appl Comput Fluid Mech 2018;12:438–58. https://doi.org/10.1080/19942060.2018.1452296.
• [21] Chau KW, Jiang YW. Three-dimensional pollutant transport model for the Pearl River Estuary. Water Res 2002;36:2029–39. https://doi.org/10.1016/S0043-1354(01)00400-6.
• [22] Senveli A, Dizman T, Celen A, Bilge D, Dalkilic AS, Wongwises S. CFD analysis of smoke and temperature control system of an indoor parking lot with jet fans. J Therm Eng 2015;1. https://doi.org/10.18186/jte.02276.
• [23] Bhowmick S. ASSESSING THE IMPACT OF PASSIVE COOLING ON THERMAL COMFORT IN LIG HOUSE USING CFD. J Therm Eng 2019. https://doi.org/10.18186/thermal.623212.
• [24] Açıkgöz Ö. DETERMINATION OF CONVECTIVE, RADIATIVE, AND TOTAL HEAT TRANSFER CHARACTERISTICS OVER A RADIANT HEATED CEILING: A COMPUTATIONAL APPROACH. J Therm Eng 2019. https://doi.org/10.18186/thermal.623191.
• [25] Buckmaster DJ, Abramson AR. Characterization of the effects of insulating wall paint on space conditioning in a room. J Therm Eng 2015;1. https://doi.org/10.18186/jte.03430.
• [26] Eshack A, Samuel DGL, Nagendra SMS, Maiya MP. Monitoring and simulation of mechanically ventilated underground car parks. J Therm Eng 2015;1. https://doi.org/10.18186/jte.88079.
• [27] Ganesh GA, Sinha SL, Verma TN. Numerical simulation for optimization of the indoor environment of an occupied office building using double-panel and ventilation radiator. J Build Eng 2020;29. https://doi.org/10.1016/j.jobe.2019.101139.
• [28] Ganesh GA, Sinha SL, Verma TN. Effect of Inlet Airflow Direction on the Indoor Environment of a Naturally Ventilated Room using CFD. Int J Eng Adv Technol 2020;9:580–91. https://doi.org/10.35940/ijeat.c5112.029320.
• [29] Verma TN, Sinha SL. Numerical Simulation of Contaminant Control in Multi-Patient Intensive Care Unit of Hospital Using Computational Fluid Dynamics. J Med Imaging Heal Informatics 2015;5:1088–92. https://doi.org/https://doi.org/10.1166/jmihi.2015.1500.
• [30] Verma TN, Sinha SL. Contaminant Control in Intensive Care Unit of Hospital. Appl Mech Mater 2014;592–594:2486–90. https://doi.org/https://doi.org/10.4028/www.scientific.net/AMM.592-594.2486.
• [31] Verma TN, Sahu AK, Sinha SL. Study of Particle Dispersion on One Bed Hospital using Computational Fluid Dynamics. Mater Today Proc 2017;4:10074–9. https://doi.org/10.1016/j.matpr.2017.06.323.
• [32] Verma TN, Sinha SL. Contaminant control in intensive care unit of hospital. Appl Mech Mater 2014;592–594:2486–90. https://doi.org/10.4028/www.scientific.net/AMM.592-594.2486.
• [33] Nath Verma A T, Lata Sinha A S. Trajectory of Contaminated Particle in Intensive Care Unit of Hospitals Using Numerical Modeling. Int J Des Manuf Technol 2015;9:43–7. https://doi.org/10.18000/ijodam.70150.
• [34] Verma TN, Sahu AK, Sinha SL. Numerical Simulation of Air Pollution Control in Hospital. Air Pollut. Control. Energy, Environ. Sustain., Springer Nature Singapore; 2018, p. 185–206. https://doi.org/10.1007/978-981-10-7185-0_11.
• [35] Verma TN, Sahu AK, Sinha SL. Numerical simulation of air flow to ventilate intensive care unit of hospital. Comput. Appl. Educ. Res. Sci. Technol., vol. 1, International Research Publication House; 2018, p. 131–8.
• [36] Teodosiu C, Kuznik F, Teodosiu R. CFD modeling of buoyancy driven cavities with internal heat source - Application to heated rooms. Energy Build 2014;68:403–11. https://doi.org/10.1016/j.enbuild.2013.09.041.
• [37] Myhren JA, Holmberg S. Flow patterns and thermal comfort in a room with panel, floor and wall heating. Energy Build 2008;40:524–36. https://doi.org/10.1016/j.enbuild.2007.04.011.
• [38] Myhren JA, Holmberg S. Design considerations with ventilation-radiators: Comparisons to traditional two-panel radiators. Energy Build 2009;41:92–100. https://doi.org/10.1016/j.enbuild.2008.07.014.
• [39] Horikiri K, Yao Y, Yao J. Modelling conjugate flow and heat transfer in a ventilated room for indoor thermal comfort assessment. Build Environ 2014;77:135–47. https://doi.org/10.1016/j.buildenv.2014.03.027.
• [40] Horikiri K, Yao Y, Yao J. Numerical optimisation of thermal comfort improvement for indoor environment with occupants and furniture. Energy Build 2015;88:303–15. https://doi.org/10.1016/j.enbuild.2014.12.015.
• [41] Myhren J, Holmberg S. Comfort temperatures and operative temperatures in an office with different heating methods 2006:0–5.
• [42] Patankar S V., Spalding DB. A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows. Int J Heat Mass Transf 1972;15:1787–806. https://doi.org/10.1016/0017-9310(72)90054-3.
• [43] ANSYS, Inc. (2016) ANSYS Fluent User’s Guide, Release 17.
• [44] de Dear RJ, Leow KG, Ameen A. Thermal comfort in the humid tropics. Part I. Climate chamber experiments on temperature preferences in Singapore. ASHRAE Trans 1991;97:874–9.
• [45] de Dear RJ, Leow KG, Ameen A. Thermal comfort in the humid tropics. Part II. Climate chamber experiments on thermal acceptability in Singapore. ASHRAE Trans 1991:880–6.
• [46] de Dear RJ, Leow KG, Foo SC. Thermal comfort in the humid tropics: Field experiments in air conditioned and naturally ventilated buildings in Singapore. Int J Biometeorol 1991;34:259–65. https://doi.org/10.1007/BF01041840.
• [47] Wendt JF, Anderson JD, Degroote J, Degrez G, Dick E, Grundmann R, et al. Computational fluid dynamics: An introduction. 3rd ed. Springer-Verlag Berlin Heidelberg; 2009. https://doi.org/10.1007/978-3-540-85056-4.
• [48] ISO-7730. International Organization for Standardization: Moderate Thermal Environments - determination of the PMV and PPD indices and specification of the conditions for thermal comfort. International Organization for Standardization, 1994.
• [49] Fanger PO, Christensen NK. Perception of draught in ventilated spaces. Ergonomics 1986;29:215–35. https://doi.org/10.1080/00140138608968261.
• [50] Fanger PO, Melikov AK, Hanzawa H, Ring J. Air turbulence and sensation of draught. Energy Build 1988;12:21–39. https://doi.org/10.1016/0378-7788(88)90053-9.