AERODYNAMIC STUDY OF SLOTTED FLAP FOR NACA 24012 AIRFOIL BY DYNAMIC MESH TECHNIQUES AND VISUALIZATION FLOW

Year 2021, , 230 - 239, 01.02.2021

Emad Hussein Haider Azziz Farhan Rashid

https://doi.org/10.18186/thermal.871989

Cited By: 4

Abstract

Slotted flap is one of high lift devices. It considered as a moving part of the airfoil which is used as a control instrument in a form of elevator, rudders and ailerons. The main focus of work is to investigate the effect of flap chord, gap and overlap on aerodynamic characteristic of NACA 24012 airfoil. The model was tested with 20% C, 30% C and 40% C single slotted flaps at zero angle of attack. The dynamic mesh and user defined function is applied to control the flap distance with respect to wing at any position. The simulation was done by solving the governing equations (Continuity, Reynolds Averaging Naveir- Stokes and Energy Equation) in 2-D using Fluent analysis at Reynolds number of 3.1x〖10〗^6.
Based on the results presented, larger increment of lift coefficient is obtained with the larger flap chord, but this increase is accompanied by a drag penalty. Furthermore, the loss of lift coefficient associated with larger extending flap at 3% C had a very detrimental effect on the attainable lift coefficient. The simulation result also shows that an optimum gap is 1% C in order to derive the maximum lift capability from the flap model. The code is validated against field measurements to show how close the CFD model simulates the reality.

Keywords

Aerodynamic Characteristic, Slotted Flap, Dynamic Mesh, CFD, Angle of Attack

References

• [1] Norbert R. Kluga . A Study of Flap Management an Analysis of the Consequences of Flap Management and a Search for Possible Causes. JAAER 1991; 1(3): 10-25.
• [2] Foster D.N., Irwin H.P. and Willam B.R. The Two Dimensional Flow around a Slotted Flap. London. Repots and Memoranda 1971; 3681: 1-69.
• [3] Michael Damianov Todorov. Aerodynamic Characteristics of Airfoil with Single Slotted Flap for Light Airplane Wing. Technical University of Sofia 2015.
• [4] Bakhtian N. M. and Babisky H. The Low Reynolds Number Aerodynamics of Leading Edge Flaps. 45th AIAA Aerospace Sciences Meeting and Exhibit 2007:1-13.
• [5] Ma, R., & Liu, P. Numerical Simulation of Low Reynolds-Number and High-Lift Airfoil. In Proceedings of the World Congress on Engineering 2009; 1(2).
• [6] Gamboa, P., Vale, J., P. Lau, F. J., & Suleman, A. Optimization of a Morphing Wing Based on Coupled Aerodynamic and Structural Constraints. AIAA Journal 2009; 47(9): 2087-2104.
• [7] Somers D.M. Effect of Flap Deflection on Section Characteristics of S813 Airfoil. State College Pennsylvania 2005; NREL/SR-500-36335.
• [8] Emad Qasem Hussein, Farhan Lafta Rashid, Haider Nadhom Azziz. Aerodynamic Heating Distribution for Temperature Prediction of Fast Flying Body Nose Using CFD. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 2019; 64 (2): 183-195.
• [9] Kaan Ünlügençoğlu , Ahmet Yurtseven , Fuat Alarçin. Shipping Emission dispersions on the Port of Ambarli via CFD Modelling. Journal of Thermal Engineering 2020; 6(2):1-14.
• [10] Shankar, S., Astagi, H. V., Hotti, S. R., Hebbal, O., Dixit, M., Kaushik, S. C., Sharifishourabi, M.. Effect of Exhaust Gas Recirculation (EGR) on Performance, Emissions and Combustion Characteristics of a Low Heat Rejection (LHR) Diesel Engine Using Pongamia Biodiesel. Journal of Thermal Engineering 2016; 2(6): 1007-1016.
• [11] Hotti, S., & Hebbal, O. Biodiesel production and fuel properties from non-edible Champaca (Michelia champaca) seed oil for use in diesel engine. Journal of Thermal Engineering 2015; 1(1): 330-336.
• [12] D. Khan and Z. Gul. Performance Map Measurement, Zero-Dimensional Modelling & Vibration Analysis of A Single Cylinder Diesel Engine. Journal of Thermal Engineering 2017; 3(4):1391–1410.
• [13] Iman Zahmatkesh , Homayoun Emdad , Mohammad M. Alishahi. Multifluid Description of Rarefied Gas Mixture Flows. Journal of Thermal Engineering 2020; 6(3): 405-421.
• [14] Emad Qasem Hussein, Basim Raheem, Farhan Lafta. Fluid Structure Interaction of Non–Return Valve Using CFD. Journal of Mechanical Engineering Research and Developments 2020; 43 (7):137-148.
• [15] Dino Florjancic. Improved Design of a High Lift System for General Aviation Aircraft. Master Thesis, Delft University of Technology 2015.
• [16] Withman, N., Sparks, R., Ali S., and Ashworth J. Experimental Investigation of Slotted Airfoil Performance with Modified Slot Configurations. AIAA 2006.
• [17] Van Dam CP. The Aerodynamic Design of Multi-Element High-Lift Systems for Transport Airplanes. Progress in Aerospace Sciences 2002; 38: 101-144.
• [18] Fluent Inc. FLUENT 6.0 User’s Guide 2001; 5, USA.
• [19] ANSYS Inc. Fluent 2010: http://www.ansys.com/products/fluid-dynamics/fluent/
• [20] Ryne Derrick Rademacher. Computational Analysis of a Wing Oscillation. Master Theses, West Michigan University 2012.
• [21] Eastman N. , Jacons, M. Pinkerton. Tests of Related Forward Camber Airfoil in the Variable Density Wind Tunnel. Report No. 610 1996: 697-731.
• [22] Ira. H. Abbott. Theory of Wing Sections Including A Summary of Airfoil Data. ISBN 0-486-605868, New York 1958.
• [23] Muhannad Al-Waily , Nibras A. Aziz Al-Roubaiee , Emad Q. Hussein. Mechanical behavior investigation for hip joint with inclination angle influence by manufacturing and design simulator instrument machine. International Journal of Energy and Environment 2020; 11(1): 47-60.