THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD

Year 2021, , 415 - 428, 01.03.2021

Jayappa Kumaraswamy Vıjaya Kumar Gange Gowda Purushotham Rohıt Suresh

https://doi.org/10.18186/thermal.882965

Cited By: 42

Abstract

The current research aims to develop a hybrid metal matrix composition that focuses on the nickel alloy and its thermal properties. The different temperature ranges are used to analyze the function of MMCs such as thermal conductivity and coefficient of thermal expansion. This paper addresses the thermal properties obtained from a series of Al2O3 and TiO2 reinforced nickel alloy (ASTM A494 M), with dispersed particle sizes ranging from 40-45 microns of Al2O3 and 1-5 microns of TiO2. The quantity of the Al2O3 addition varies from 3-12 weight % and 9 weight % of TiO2 unvarying in the stages of three weight percentages. The microstructural investigation states that, because of the stir casting on the vortex, the distribution of reinforcements is uniform with a strong bond. With the increase in Al2O3 and TiO2 content in HMMCs, a thermal property is found to diminish significantly. The results indicate that the reinforcements have a major effect on the thermal expansion coefficient as well as on the thermal conductivity of the hybrid composites being produced. Various types of microstructural have been performed using electron microscopy scanning and EDAX. The limited examination of the exhaust valve of the I C engine shows that the nickel combination composites can be utilized as a substitute for the present valve material (Ni-Cr alloy steel). All tests acted in this investigation meet ASTM specifications.

Keywords

Nickel alloy, Hybrid metal matrix composites, Thermal conductivity, Heat flux, Finite element analysis

References

• [1] Joel Hemanth, Development of Nickel Alloy Reinforced with Fused SiO2 Chilled Composites and Evaluation of Thermal Properties (Thermal Conductivity & Coefficient of Thermal Expansion) and Temperature Distribution by Finite Element Analysis (FEA). Open Journal of Composites Materials. 2017; 7(5): 251-264.
• [2] Purushotham G, Joel Hemanth. Influence of fused Silica and chills incorporation on Corrosion, Thermal and Chemical composition of ASTM A 494 M Grade Nickel alloy. IOP Conf. Ser.: Materials Science and Engineering. 2016; 149-012042: 1-13. https:// doi.org/10.1088/1757-899X/149/1/012042
• [3] Trzepiecinski T, Lemu HG. Frictional Resistances of AMS5599 Nickel-based Alloy at High Pressure Conditions IOP Conf. Ser.: Materials Science and Engineering. 2018; 381-012159:1-7. https:// doi.org/10.1088/1757-899X/381/1/012159.
• [4] Joel Hemanth, Corrosion Behavior of Nickel Alloy (ASTM A 494 M) Reinforced with Fused SiO2 Chilled Metal Matrix Composites (MMCs) for Marine Applications. Materials Science and Engineering. 2017; 225-012192:1-7. https:// doi.org/10.1088/1757-899X/225/1/012192
• [5] Purushotham G, Joel Hemanth. Study of Physico-Chemical Properties of Monel M-35-1 Nickel Alloy-Fused Silica Metal Matrix Composite for Marine Application. Indian Journal of Advances in Chemical Science. 2016; 4(3): 235-240.
• [6] Nelson AT., White JT, Anderson DA.Thermal Expansion, Heat Capacity and Thermal Conductivity of Nickel Ferrite (NiFe2O4). The American Ceramic Society, 2014; 4: 1-7. https://doi.org/10.1111/jace.12901
• [7] Zielińska M, Yavorska M, Poręba M, Sieniawski J. Thermal properties of cast nickel based superalloys. Archives of Materials Science and Engineering. 2010; 44(1): 35-38.
• [8] El-Bagoury N, Mohammed A. Amin, Mohsen Qhatani, Effect of Various Heat Treatment Conditions on Microstructure, Mechanical Properties and Corrosion Behavior of Ni-base Superalloys. Int. J. Electrochem. Sci., 2011; 6(12): 6718-6732.
• [9] Meenu Srivastava, Srinivasan A, William Grips V K. Influence of Zirconia Incorporation on the Mechanical and Chemical Properties of Ni-Co Alloys. American Journal of Materials Science. 2011; 2:113-122. https:// doi.org/10.5923/j.materials.20110102.19
• [10] Durul Ulutan, Tuğrul Özel. Machining-Induced Surface Integrity in Titanium and Nickel alloys: A Review. International Journal of Machine Tools & Manufacture. 2011; 51:250–280. https:// doi.org/10.1016/j.ijmachtools.2010.11.003
• [11] Calin, Recep, Muharrem Pul, and Zühtü Onur Pehlivanli. The effect of reinforcement volume ratio on porosity and thermal conductivity in Al-Mgo composites. Materials Research. 2012; 15(6): 1057-1063.
• [12] X D Liu, J S Zhang, X M Cao, H Zhang. Finite element simulation of the thermal properties of particulate and continuous network-reinforced metal-matrix composites. Proc.Imech, Part B: Journal of Engineering Manufacture, 2005; 219(1): 111-121. https://doi.org/10.1243/095440505X8055
• [13] Zahra Fattahi, Seyed Abdolkarim Sajjadi, Abolfazl Babakhani, Farhad Saba. Ni–Cr matrix composites reinforced with nano and micron sized surface-modified zirconia: Synthesis, microstructure and mechanical properties. Journal of Alloys and Compounds. 2020;817:15275. https://doi.org/10.1016/j.jallcom.2019.152755
• [14] Cem Okumus S, Serdar Aslan. Ramazan Karslioglu, Deniz Gultekin, Hatem Akbulut. Thermal Expansion and Thermal Conductivity Behaviors of Al-Si/SiC/graphite Hybrid Metal Matrix Composites (MMCs). Materials Science (Medziagotyra). 2012; 18(4):341-346. http://dx.doi.org/10.5755/j01.ms.18.4.3093
• [15] Davis LC, Artz BE. Thermal conductivity of metal matrix composites. Journal of Applied Physics. 1995; 77 (10): 4954-4960.
• [16] Matine A, Boyard N, Cartraud P, Legrain G, Jarny Y. Thermal properties of composite materials: effective conductivity tensor and edge effects. J. Phy. Conf. Ser., 2012; 395-012014:1-9. doi:10.1088/1742-6596/395/1/012014
• [17] Sunil Kumar Reddy K, Kannan M, Karthikeyan R, Laxman B. Evaluation of thermal and mechanical properties of Al7475 alloy reinforced with SiC and graphite. Materials Today: Proc. 2020; 26(2): 2691-2696. https://doi.org/10.1016/j.matpr.2020.02.566