A SYSTEMATIC GRAPHICAL METHOD FOR SYNTHESIS OF HEAT EXCHANGER NETWORKS

Year 2021, , 890 - 903, 01.05.2021

Mohammad Al-mayyahia Mohammad Fares Nabeel Abbood

https://doi.org/10.18186/thermal.930713

Abstract

Heat exchanger networks (HENs) play a significant role in the energy conservation of any process industry. The HENs are used to maximize heat recovery by exchanging heat between hot and cold process streams. Therefore, the optimum design of HENs is extremely important to reach the maximum efficiency of energy systems. Many graphical methods have been developed during the last four decades for synthesizing of heat exchanger networks (HENs). However, most of these methods have only been evaluated for retrofitting design of HENs. In the grassroots design situation, these methods are often complicated and tedious. This paper introduces a new and simple graphical approach for HEN grassroots design. The new approach based on a single graph called Supply-Target Diagram (ST-D). The ST-D is formulated by plotting supply temperatures versus target temperatures of streams. Streams matching can easily be applied in the ST-D and splitting of streams is clearly visualized and evaluated. A case study is used to illustrate the application of the new graphical method for grassroots design of HENs.

Keywords

Pinch Analysis, Energy Integration, Graphical Approach, Supply-Target Diagram, Heat Exchanger Network

References

• [1] IEA. World Energy Outlook, 2017. [2] Litman T. Efficient vehicles versus efficient transportation. Comparing transportation energy conservation strategies. Transport Policy, 2005;12(2):121-129.
• [3] Hoseinzadeh S, Hadi Zakeri M, Shirkhani A, Chamkha AJ. Analysis of energy consumption improvements of a zero-energy building in a humid mountainous area. Journal of Renewable and Sustainable Energy, 2019;11: 015103.
• [4] Belzer, DB. Energy efficiency potential inexisting potential buldings; Review of selected recent studies. Pacific Northwest National Laboratories, US department of Energy, 2009.
• [5] Abdelaziz EA, Saidur R, Mekhilef S. A review on energy saving strategies in industrial sector. Renewable and Sustainable Energy Reviews, 2011;15(1):150-168.
• [6] Hoseinzadeh S, Azadi R. Simulation and optimization of a solar-assisted heating and cooling system for a house in Northern of Iran. Journal of Renewable and Sustainable Energy. 2017;9:045101.
• [7] IEA 2019, France, Energy Efficiency: Industry: The global exchange for energy efficiency policies, data and impacts, Last Accessed 26 July 2019, https://www.iea.org/topics/energyefficiency/industry/.
• [8] Umeda T, Itoh J, Shiroko K. Heat exchange system synthesis. Chemical Engineering Progress, 1978;73(7): 70-76.
• [9] Linnhoff B, Flower JR. Synthesis of heat exchanger networks - 1. Systematic generation of energy optimal networks. AIChE Journal, 1978;24(4): 633-642.
• [10] Shenoy UV. Heat Exchanger Network Synthesis: Process Optimization by Energy and Resource Analysis. Gulf Publishing Co., Houston, TX, USA, 1995.
• [11] Semra O, Salih D. Application for pinch design of heat exchanger networks by use of a computer code employing an improved problem algorithm table. Energy conversion and management, 2001;42:2043-2051.
• [12] Smith, R. Chemical Process Design and Integration. John Wiley & Sons Ltd, West Sussex, UK, 2005.
• [13] Klemes J, Friedler F, Bulatov I, Varbanov P. Sustainability in the Process Industry. Integration and Optimization. McGraw-Hill, New York, US, 2010.
• [14] Anantharaman R, Nastad I, Nygreen B, Gundersen T. The sequential framework for heat exchanger network synthesis—The minimum number of units sub-problem. Computers and Chemical Engineering 2010;34: 1822–1830.
• [15] Boland D, Linnhoff B. The preliminary design of networks for heat exchange by systematic methods. Chem. Eng., 1979; 222.
• [16] Yong JY, Varbanov PS, Klemeš JJ. Matrix representation of the grid diagram for heat exchanger networks. Chemical Engineering Transactions, 2015;45:103-108.
• [17] Lakshmanan R, Bañares-Alcántara R. A Novel Visualization Tool for Heat Exchanger Network Retrofit, Ind. Eng. Chem. Res., 1996; 35:4507-4522.
• [18] Nordman R, Berntsson T. New Pinch Technology Based HEN Analysis Methodologies for Cost-Effective Retrofitting. Can. J. Chem. Eng., 2001; 79(4):655-662.
• [19] Osman A, Abdul Mutalib MI, Shuhaimi M, Amminudin KA. Paths combination for HENs retrofit. Applied Thermal Engineering, 2009; 29(14–15):3103-3109.
• [20] Wan Alwi SR, Manan ZA. STEP—A new graphical tool for simultaneous targeting and design of a heat exchanger network. Chemical Engineering Journal, 2010;162:106-121.
• [21] Abbood NK, Manan ZA, Wan Alwi SR. A combined numerical and visualization tool for utility targeting and heat exchanger network retrofitting. Journal of Cleaner Production, 2012; 23:1-7.
• [22] Gadalla MA. A New Graphical Method for Pinch Analysis and Energy Integration. Chemical Engineering Transactions, 2015;43:1291-1296.
• [23] Lai YQ, Manan ZA, Wan Alwi SR. Heat Exchanger Network Retrofit Using Individual Stream Temperature vs Enthalpy Plot. Chemical Engineering Transactions, 2017; 61:1651-1656.
• [24] Yeo YS, Wan Alwi SR, Ahmad S, Manan ZA, Zamzuri NH. A new graphical method for heat exchanger network design involving phase changes. Chemical Engineering Transactions, 2017; 56:1249-1254.
• [25] Al-Mayyahi MA, Albadran FA, Fares MN. Retrofitting Design of Heat Exchanger Networks Using Supply-Target Diagram. Chemical Engineering Transactions, 2019; 75:625-630.
• [26] Asante NDK, Zhu XX. An automated and interactive approach for heat exchanger network retrofit. Trans IChemE, 1997; 75:349.
• [27] Doğan B, Erbay LB. Experimental analysis of the effect of cold fluid inlet temperature on the thermal performance of a heat exchanger. Journal of Thermal Engineering, 1997; 2(1):583-592.
• [28] Pourfayaz F, Kasaeian A, Fard MM. A proper selection of hot and cold utilities in a plant containing multiple heat exchanger networks. Journal of Thermal Engineering, 2019; 5(4):341-354.