Effect of Different Drill Bits on Delamination in Drilling Composite Materials

Year 2022, Volume: 17 Issue: 2, 279 - 297, 30.09.2022

Haşim Pıhtılı

https://doi.org/10.55525/tjst.1087099

Abstract

The most important problem of composite materials, which have been started to be used in every field of technology, is the ability to perform machining operations such as drilling and cutting. In this respect, in this experimental study, its performance in drilling different composite materials with different reinforcements and thicknesses with drills of different types and different diameters was investigated. Three different types of drills were used in drilling operations, namely HSS, TIN and Carbide. Reinforced composites of different types and properties were used as materials. As a result of the drilling processes, the surface roughness of the drilled surface, drilling performance, hole quality and different cutting parameters were examined depending on the rotation and feed rate. The same drilling conditions were applied for each composite material. All result values obtained were transferred to graphs and tables. In addition, photographs of all samples were taken under Scanning electron microscopy (SEM) and the surface roughness of these photographs was examined.

Keywords

Drilling, Composite Materials, Carbide, Roughness

References

• [1] Hocheng H, Tsao CC.: The path towards delamination – free drilling of composite materials. J Mater Process Technol; DOI: 10.1016/j.jmatprotec.2005.06.039-167:251–64 ,2005.
• [2] Hocheng H, Tsao CC.: Effects of special drill bits on drilling-induced elamination of composite materials.Int J Mach Tools Manuf;46,11,12): DOI:10.1016/j.ijmachtools.2005.10.004-1403–16 ,2006.
• [3] Koenig W, Grass P, Heintze A, Okcu F, Schmitz-Justin C. Developments in drilling, contouring composites containing Kevlar. Prod Engineer;DOI:10.34218/IJM.12.5.2021,.024-63(8):56–7. 60–1,1984.
• [4] Pihtili H,Canpolat, N., Investigation of Different Reinforced Composite Materials for Surface Roughness and Capacity of Being Drilled Journal of Composıte Materıals, Vol. 43, No. 19 DOI:10.1177/0021998314532668 -2009.
• [5] Schaefer, W.H., Christion, J.L.,Evaluation of the Structural Behavior of Filament Reinforced Metal Matrix Composites, Technical Report No. AFML-TR-69-36, Vol. 3, Air Force Materials Laboratory, ISBN 0-12-136504-2-1969.
• [6] Chamber, A.R., Stephens, S.E. Machining of A1-5Mg Reinforced with 5 Vol.%Saffil and 15 Vol. % SiC, Materials Science and Engineering, https://doi.org/10.1016/0921-5093(91)90577-A-A135: 287_290,1991.
• [7] Joshi, S.S., Ramakrishnan, N., Ramakrishnan, P. Analysis of Chip Breaking During Orthogonal Machining of A1/SiCp Composites, Journal of Materials Processing Technology, ISSN: 2276-9919 © E3 Journals 2014-88: 90_96,1999.
• [8] El-Gallab, M., Sklad, M. Machining of Al/SiC Particulate Metal-matrix Composites Part I: Tool Performance, Journal of Materials Processing Technology, https://doi.org/10.1016/S0924-0136(98)00054-5- 83: 151_158.,1998.
• [9] Lin, J.T., Bhattacharyya, D., Ferguson, W.G. Chip Formation in the Machining of SiC-particle-reinforced Aluminum-matrix Composites, Composites Science and Technology, DOI:10.1016/S0266-3538(97)00126-7-58(2):285_291 ,1998.
• [10] Arul, S., Vijayaraghavan, L., Malhotra, S.K.,Krishnamurthy, R. The Effect of Vibratory Drilling on Hole Quality in Polymeric Composites, International Journal of Machine Tools & Manufacture, DOI:10.1016/j.ijmachtools.2005.05.023- 46: 252_259, 2006.
• [11] Şenol,B.,and Ali P., Current technologies for aluminum castings and their machinability, in Advanced Welding and Deforming- DOI: 10.1016/b978-0-12-822049-8.00019-0 ,2021.
• [12] Şenol, B., Dry cutting: a sustainable machining technology, in Sustainable Manufacturing- DOI: 10.1016/b978-0-12-818115-7.00004-3 ,2021.
• [13] Bhawani,S.,and R.K. Goel, Rock Mass Quality for Open Tunnel Boring Machines, in Engineering Rock Mass Classification- DOI:10.1016/B978-0-12-385878-8.00014-8 pp.185-191 ,2011.
• [14] Bernt, S. Aadnøy, Reza Looyeh, Wellbore Instability Analysis, in Petroleum Rock Mechanics (Second Edition)- ISBN 9780128159040, 2019.
• [15] Xingru, Wu, A Special Focus on Formation Damage in Offshore and Deepwater Reservoirs, in Formation Damage During Improved Oil Recovery - ISBN: 9780128137826 ,2018.