DETERMINATION OF SOUND TRANSMISSION COEFFICIENT OF GYPSUM PARTITION WALLS INSULATED BY CELLUBOR™

Year 2020, Volume: 4 Issue: 2, 70 - 76, 01.04.2020

Abdulkerim İlgün , Ahmad Javid Zia

https://doi.org/10.31127/tuje.596158

Abstract

One of the biggest problems of using public spaces for constructions, such as high-rise buildings, offices, hospitals, and hotels, is noise caused by sound transmission through the lightweight partition walls used to divide volumes. In this study, experiments were carried out to determine the sound transmission coefficient of lightweight gypsum partition walls insulated by CelluBor. Experiments were performed in an anechoic test chamber consists of two separate cells. One cell was used as the sound source, and the other one was used as the receiver cell. A total of 12 samples were used in the experimental studies, which were categorized into four separate groups. The main features that distinguished these groups from each other were the profile height used in the samples and the number of gypsum board layers used on each side of the profiles. In addition, one blank (no insulation) sample, one half filled, and one fully filled with insulation material were used for each test group. The test samples were placed between two cells. The sound volume of the sound source was measured separately in dB in both cells, and the sound transmission coefficients of 12 different samples were determined. It was observed that the most efficient results were obtained only when half of the profile height was filled with the CelluBor material. The use of a composite material consists of boron and waste materials such as CelluBor as sound insulation material in lightweight partition walls can affect the sound transmission coefficient greatly.

Keywords

Gypsum Partition Walls, CelluBor, Sound, Transmission Coefficient, Structural Acoustic

References

• Ballagh, Keith O. “Accuracy of Prediction Methods for Sound Transmission Loss.” Inter-Noise, vol. 47, no. 1, 2004, pp. 1–8.
• Başbuğ, Ercüment. Sound Transmission Through Suspended Ceilings. Boğaziçi University, 2005.
• Cambridge, Jason Esan. An Evaluation of Various Sound Insulation Programs and Their Use in the Design of Silent Rooms. Chalmers University Of Technology, 2006.
• Carvalho, António Pedro O. “Acoustical Behavior of a New Lightweight Partition Made with Gypsum Board and Cork.” The Journal of the Acoustical Society of America, vol. 98, no. 5, Presented at the 130th meeting of the Acoustical Society of America, St. Louis MO, Nov.1995, 1995, p. 2879, doi:10.1121/1.413124.
• Çoşgun, Turgay, et al. “A Research about the Noise Problems in Buildings Constructed with Tunnel Shuttering System.” Uygulamalı Yerbilimleri Sayı:1, 2008, pp. 65–72.
• Díaz-Cereceda, Cristina, et al. “The Finite Layer Method for Modelling the Sound Transmission through Double Walls.” Journal of Sound and Vibration, vol. 331, no. 22, Journal of Sound and Vibration, 2012, pp. 4884–900, doi:10.1016/j.jsv.2012.06.001.
• Faustino, Jorge, et al. “Impact Sound Insulation Technique Using Corn Cob Particleboard.” Construction and Building Materials, vol. 37, 2012, pp. 153–59, doi:10.1016/j.conbuildmat.2012.07.064.
• Hernández-Olivares, F., et al. “Development of CorkGypsum Composites for Building Applications.” Construction and Building Materials, vol. 13, no. 4, 1999, pp. 179–86, doi:10.1016/S0950-0618(99)00021-5.
• Ilgun, Abdulkerim, et al. “Determination of Sound Transfer Coefficient of Boron Added Waste Cellulosic and Paper Mixture Panels.” Scientific Research and Essays, vol. 5, no. 12, 2010, pp. 1530–35.
• Karaağaçlioğlu, İbrahim Ethem. Bor ve Mineral Katkili Selülozik Yalitim Malzemesi Üretimi ve Karakterizasyonu. İstanbul Teknik Üniversitesi, 2012.
• Özkan, Sadık. “Ses Yalitimi Uygulamalari.” TMMOB Makina Mühendisleri Odası Yalıtım Kongresi 23-24-25 Mart 2001 Eskişehir - Türkiye, TMMOB Makina Mühendisleri Odası, 2001, pp. 114–19.
• Phillips, Richard Michael. Investigation of Transmission Loss through Double Wall Structures with Varying Small Air Gaps Using Modal Analysis . University of Louisville, 2014.
• Senthilkumar, P. “Studies on the Transmission of Sound in Lightweight Building Components.” In Partial Fulfillment of the Requirements for the Degree of Doctor Of Philosophy, Srm University, Kattankulathur – 603 203, 2012.
• Tadeu, A., and P. Santos. “Assessing the Effect of a Barrier between Two Rooms Subjected to Low Frequency Sound Using the Boundary Element Method.” Applied Acoustics, vol. 64, 2003, pp. 287–310.
• Tadeu, António, et al. “Sound Insulation Provided by Single and Double Panel Walls—a Comparison of Analytical Solutions versus Experimental Results.” Applied Acoustics, vol. 65, no. 1, 2004, pp. 15–29, doi:10.1016/j.apacoust.2003.07.003.
• Thomalla, Richard O. “Plumbing Appliance Noise-It Can Now Be Measured.” Architectural Engineering, Architectural Engineering, 2003, p. 3.
• Uris, Antonio, et al. “The Influence of Slits on Sound Transmission through a Lightweight Partition.” Applied Acoustics, vol. 65, no. 4, 2004, pp. 421–30, doi:10.1016/j.apacoust.2003.11.006.
• Warnock, A. C. C., and J. D. Quirt. “Control of Sound Gypsum Board Walls.” Institute for Research in Construction, National Research Council of Canada., vol. 1, no. Construction Technology Updated No. 1, 1997, pp.1–6, http://www.nrc-cnrc.gc.ca/ctusc/files/doc/ctusc/ctu-n1%0Aeng.pdf.
• Zia, Ahmad Javid. Analysis of Experimentally Designed Soundproof Gypsum Partition Wall’s Sections in Terms of Structural Engineering. Selçuk University, 2014