Investigation of acceleration on non-structural building elements under earthquake effect

Year 2023, Volume: 7 Issue: 1, 56 - 63, 15.01.2023

Mustafa Halûk Saraçoğlu , Ahmet Özkaya

https://doi.org/10.31127/tuje.1021866

Abstract

Non-structural elements of a building are often not considered in structural analysis. Therefore, due attention is not paid to them during the design process of the building. However, non-structural elements are exposed to seismic forces and therefore they are exposed to damage and failures that have psychological and economic consequences in some critical and vital structures during seismic events. Depending on the type of building the total cost of non-structural elements and the ratio of the project cost are many times higher than the cost of structural elements. In this study, the equivalent earthquake load was investigated within the scope of the design principles of non-structural building elements under the effect of the earthquake defined in Turkish Building Earthquake Code 2018.

Keywords

Turkish Building Seismic Code 2018, Non-structural building elements, Equivalent earthquake load, Spectral acceleration coefficient

References

• Turkish Building Earthquake Code (TBEC-2018), Afet ve Acil Durum Yönetimi Başkanlığı, Resmi Gazete, Sayı: 30364 (Mükerrer), 18 Mart 2018
• Atu, S. (2000). Architectural details damaged by earthquake and precautions to be taken. Doctoral Thesis, İstanbul Technical University, Institute of Science, İstanbul, 81p.
• Büyükkaragöz, A. & Cantürk, R. (2018). The behaviour of non-structural elements under earthquake effect in industrial buildings. GU J Sci, Part C, 6(2), 426-434.
• Özkaya, A. (2021). Design of non-structural building elements. Master’s Thesis, Kütahya Dumlupınar University, Institute of Science, Kütahya, 67p
• Girgin, S. C. (2008). Dynamic analysis of nonstructural (secondary) systems. Master’s Thesis, Dokuz Eylül University, Institute of Science, İzmir, 91p
• Tüzün, C. (2019). New Approaches in Seismic Design of Buildings and Seismic Protection Methodologies for Mechanical Installations. 14th National Congress on Installation Engineering, 987-995, İzmir, Turkey.
• İpek C, Kuzucuoğlu, A. H. & Kıstır, M. R. (2015). Evaluatıon of nonstructual systems ın terms of earthquake effects. International Burdur Earthquake & Environment Symposium (IBEES2015), 197-206, Burdur, Turkey.
• İpek, C. (2015). Analysis of non-structural systems under earthquake effect. 5th International Earthquake Symposium, 187-199, Kocaeli, Turkey.
• Mısır, İ. S., Özçelik, Ö., Girgin, S. C., Kahraman, S. & Baran, T. (2010). Reducing vulnerability of non-structural elements and shaking table tests. İMO Newsletter, 25(152), 24-26.
• Taş, H. H. (2010). Investigation of earthquake behavior of non- structural wood interior equipment. Doctoral Thesis, Süleyman Demirel University, Institute of Science, Isparta, 153p.
• Beşir, Ş. E. & Dereci, Ş. (2021). Risks and measures that can be taken by non-structural elements in housing indoor during earthquakes. International Social Mentality and Researcher Thinkers Journal, 7(42), 350-360.