A Review on Inter-row Crops Mechanical Weeder

Year 2020, Volume: 1 Issue: 1, 200 - 221, 30.06.2020

Adewale Sedara , Oluwadunsin Sedara

Abstract

A weed can be thought of as any plant growing in the wrong place at the wrong time and doing more harm than good, Weeding is an important but equally labour intensive agricultural unit operation. There is an increasing interest in the use of mechanical intra-row weeders because of concern over environmental degradation and a growing demand for organically produced food. Today the agricultural sector requires non-chemical weed control that safeguards consumers demand for high quality food products and pay special attention to food safety. Through the technical development of mechanisms for physical weed control, such as precise inter-and intra-row weeders, it might be possible to control weeds. These mechanisms contribute significantly to safe food production, there is a need to review existing mechanical weeders to know their merits and demerit.

Keywords

weeds, weeder, weed control

References

• [1] Parish, S. (1990). “A review of non-chemical weed control techniques”. Biological Agriculture and Horticulture, vol.7: 117-137.
• [2] Oni, K. C. (1990). “Performance Analysis of a Ridge Profile Weeder”. Proceeding of Nigerian Society of Agricultural Engineers. 3: 189-199.
• [3] Nag, P. K. and P. Dutta (1979). Effectiveness of some simple agricultural weeders with reference to physiological responses. Journal of Human Ergonomics, 8: 11-21.
• [4] Olukunle, O. J., and Oguntunde, P. G. (2006). Design of a Row Crop Weeder. Conference on International Agricultural research for development. Tropentag, 2006. Held at the University of Bonn. October 11-13, 2006. Germany.
• [5] Yadav, R. and Pund, S. (2007). “Development and Ergonomic Evaluation of Manual Weeder”. Agricultural Engineering International: the CIGR E-journal. Manuscript. PM 07 022. Vol. IX. October, 2007.
• [6] Mehta, C. R, Chandel, N. S., Jena, P. C. and Jha, A. (2019). Indian Agriculture Counting on Farm Mechanization. Ama-Agricultural Mechanization in Asia Africa and Latin America. 50(1):84-89.
• [7] Kumar, D. S., Prasad, R. M. V., Kishore, K. R. and Rao, E. R. (2012). Effect of Azolla (Azolla pinnata) based concentrate mixture on nutrient utilization in buffalo bulls. Indian Journal Animal Resources, 46 (3): 268-271. [8] Ravi, T. (2000). Development of Mandava single row weeder, watershed support services and activities network (wassan)
• [9] HYMATIC AGRO EQUIPMENT PVT. LTD.,Website:www.hymatic.in/hymatic cono weeder (2008)
• [10] Manuwa, S. I., Odubanjo, O. O., Malumi, B. O., Olofinkua, S. G. (2009). Development and performance evaluation of a row-crop mechanical weeder. Journal of Engineering and Applied Sciences, 4(4): 236-239. [11] Quadri, A. W. (2010). Design, Construction and Testing of Manually Operated Weeder, Department of Agricultural Engineering College of Engineering, University of Agriculture Abeokuta.
• [12] www.RekhaAgriplasltd.com/power weeder CL262 (2011). [13] Olaoye, J. O. and Adekanye T. A. (2011). Analysis of the motion of weeding tools and development of a rotary power weeder, published in the Journal of Agricultural Engineering and Technology (JAET), Volume 19 (No. 2)
• [14] Godfrey M. and Jonne R. (2012). Cono-Weeder Technical drawings, Centre for Agricultural Mechanization and Rural Technology (CAMARTEC), Arusha, Tanzania, Africa Rice Center (AfricaRice), Dar es Salaam, Tanzania
• [15] Olaoye et al., (2012), Performance Evaluation of an Indigenous Rotary Power Weeder .Energy and Environmental Engineering Journal, vol 1(2); 94-97.
• [16] Kamal, A. R. and Oladipo, N. O. (2013). Development of a Manually Operated Ridge Profile Weeder, National centre for Agricultural Mechanization, (NCAM), Ilorin, Kwara State, Nigeria, Global Journal of Current Research, Vol. 2 No. 4. 2014. Pp.70-73
• [17] Sridhar, H. S. (2013). Development of Single wheel multi use manually operated weed remover, International Journal of Modern Engineering Research (IJMER), Vol. 3, Issue. 6, Nov - Dec. 2013 pp-3836-3840, ISSN: 2249-6645
• [18] Pathade H. P., et.al, (2015). Multipurpose weeding machine, International Journal of Multidisciplinary Research and Development Volume: 2, Issue: 4, 402-405, April (2015).
• [19] Madhusudhana, S. et al., Development of Double Wheeled Multipurpose Weed Remover, International Journal of Engineering Technology, Management and Applied Sciences, February 2015, Volume 3 Issue 2, ISSN 2349-4476
• [20] Thorat D. S., Dipankar D., Sahoo, P. K. and Iquebal, M. A. (2017). Prototype: A Ridge Profile Mechanical Power Weeder, Agricultural Mechanization in Asia, Africa, and Latin America Vol.48 No. 1
• [21] Jakasania, R.G., Yadav, R. and Rudani, M.R. (2019). Performance Evaluation of Intra Row Weeder in Soil Bin. International Journal of Current Microbiology Applied Science. 8(6): 2781-2785. doi: https://doi.org/10.20546/ijcmas.2019.806.335