Abstract
Türkiye’deki birçok bina heran olması olası büyük depremlere karsı yeterli dayanıma sahip degildir. Yakın zamanda meydana gelmis büyük depremler hem ülke ekonomisine büyük zarar vermisler hem de birçok insanın hayatına mal olmuslardır. Gelecekteki depremlerin bu kadar büyük zararlar vermemeleri için sismik güçlendirme yöntemleri olabildigince çok miktarda zayıf binalara uygulanmalıdırlar. Genelde uygulanan güçlendirme yöntemleri binanın da bosaltılmasını öngören yorucu ve zaman alan insaat islerine yol açmaktadır. Bu çalısmada, Türkiye’deki binaların büyük bir kısmını olusturan betonarme çerçeveli yapılara uygulanabilecek ve yapı bosaltmayı gerektirmeyen bir sismik güçlendirme yöntemi gelistirilmektedir. Bu çalısmada önerilen teknigin prensibi, yapıda bulunan bosluklu tugla dolgu duvarların yüksek dayanımlı önüretimli beton paneller kullanılarak güçlendirilmesi esasına dayanır. Bu amaçla, Türkiye’deki binaların büyük çogunlugunda rastlanan kusurlara sahip dört adet 1/3 ölçekli iki katlı tek açıklıklı çerçeve, deprem yükünü benzestirecek tersinir-tekrarlanır yatay yükler ve sabit düsey yükler altında test edilmistir. Deneylerde iki degisik panel tipi kullanılmıstır.
Keywords
Dayanım sismik güçlendirme betonarme çerçeveli yapı bosluklu tugla dolgu yüksek dayanımlı ön üretimli beton panel tersinir-tekrarlanır yatay yük sabit düsey yük
References
- [1] Duvarci, M., “Seismic Strengthening of Reinforced Concrete Frames with Precast Concrete Panels”, MSc thesis, Department of Civil Engineering, Middle East Technical University, Ankara, Turkey, 2003. [2] Baran, M., “Precast Concrete Panel Reinforced Infill Walls for Seismic Strengthening of Reinforced Concrete Framed Structures”, PhD thesis, Department of Civil Engineering, Middle East Technical University, Ankara, Turkey, 2005. [3] Susoy, M., “Seismic Strengthening of Masonry Infilled Reinforced Concrete Frames with Precast Concrete Panels”, MSc thesis, Department of Civil Engineering, Middle East Technical University, Ankara, Turkey, 2005. [4] Okuyucu, D., PhD thesis in progress, Department of
Abstract
Many buildings in Turkey do not have sufficient capacity to stand against a major earthquake, which is expected to occur anytime. Major earthquakes in the previous years have caused enormous damage to the economy of the country as well as human lives. In order to prevent such a loss due to a future earthquake, seismic strengthening measures should be applied to as many vulnerable buildings as possible. Commonly used strengthening techniques require great and lengthy construction work which also necessitates evacuation of buildings. In this study, an innovative nonevacuation retrofitting technique is being developed for reinforced concrete building structures which constitute the major portion of the existing building stock in Turkey. The idea behind the proposed technique is to transform the existing hollow masonry infill walls into strong and rigid infill walls by reinforcing them with relatively high strength precast concrete panels Four one-third scale, one-bay, twostorey reinforced concrete frames having the deficiencies commonly observed in residential buildings in Turkey were tested under reverse-cyclic lateral loading as well as constant vertical loading until failure. Two different types of panels were used to strengthen the frames.
Keywords
Capacity seismic strengthening reinforced concrete framed structure hollow masonry infill wall high strength precast concrete panels reverse-cyclic lateral loading constant vertical loading
References
- [1] Duvarci, M., “Seismic Strengthening of Reinforced Concrete Frames with Precast Concrete Panels”, MSc thesis, Department of Civil Engineering, Middle East Technical University, Ankara, Turkey, 2003. [2] Baran, M., “Precast Concrete Panel Reinforced Infill Walls for Seismic Strengthening of Reinforced Concrete Framed Structures”, PhD thesis, Department of Civil Engineering, Middle East Technical University, Ankara, Turkey, 2005. [3] Susoy, M., “Seismic Strengthening of Masonry Infilled Reinforced Concrete Frames with Precast Concrete Panels”, MSc thesis, Department of Civil Engineering, Middle East Technical University, Ankara, Turkey, 2005. [4] Okuyucu, D., PhD thesis in progress, Department of
Details
| Journal Section | Articles |
|---|---|
| Authors | |
| Publication Date | January 15, 2009 |
| Submission Date | October 22, 2017 |
| Published in Issue | Year 2009 Volume: 1 Issue: 1 |
All Rights Reserved. Kırıkkale University, Faculty of Engineering and Natural Science.