The rising number of users and ever growing traffic rates over the networks reveal the need of higher bandwidth and transmission rates. At every packet transmission process, routers need to route the packets by looking at the routing tables, this fact leads to an increase at the load of the routers and at the amount of time consumed during the processes. Today, users need high level security, faster data transmission and easy managed network structures because of the increasing technology usage. MPLS network structures can provide these requirements with their QoS feature. In our work, at first a topology structure is constructed with the routers that are used in Alcatel-Lucent laboratories. OSPF (Open Shortest Path First) routing protocol and MPLS (Multiprotocol Label Switching) technologies are used over the topology. Afterwards, E-pipe (Ethernet Pipe) and VPLS (Virtual private LAN services) configurations are performed over the routers. To illustrate the current network data traffic, three tests are performed in the study. Routers’ configurations are performed by Secure-CRT and still developing i-Gen software. With i-Gen, many routers’ configurations can be performed with a user friendly interface. Instead of performing the configurations one by one with Secure CRT, the user can perform the routers’ configurations easily by entering the needed values for the system with i-Gen software. So, with the new and developing i-Gen software, the users’ workload is minimized and streamlined. In our work, Secure-CRT software which is mostly preferred for router configurations at Windows operating system and i-Gen software which is developed by Alcatel-Lucent are considered. Both of the router configuration softwares are worked on and gained results are expounded. Consequently, instead of using time consuming Secure-CRT software, with utilizing new developed i-Gen software, the users’ work load is minimized.
Zaman içinde ağlarda artan kullanıcı sayısı ve büyüyen trafik hacmi, daha yüksek bant genişliği ve hızlı iletim ihtiyacını da beraberinde getirmiştir. Yönlendiricilerin (router), her paket iletiminde yönlendirme tablosuna (routing table) bakıp yönlendirmeyi gerçekleştirmesi, hem yönlendiricilerin yükünü arttırmakta hem de işlemlerin süresini uzatmaktadır. Ayrıca yönlendirici konfigürasyonları da oldukça vakit almaktadır. Günümüzde kullanıcılar, artan teknoloji kullanımı ile birlikte üst düzey güvenlik, daha hızlı veri iletimi ve daha kolay yönetilebilen ağ yapılarına ihtiyaç duymaktadır. MPLS ağ topolojileri, sundukları Servis Kalitesi (Quality of Services- QoS) ile bu gereksinimlere cevap verebilecek düzeydedir. Çalışmamızda, Alcatel-Lucent laboratuvarlarında kullanılan yönlendiriciler ile öncelikle bir topoloji yapısı oluşturulmuştur. Bu topoloji üzerinde, ilk açık en kısa yol (Open Shortest Path First-OSPF) yönlendirme protokolü ve çoklu protokol etiket anahtarlama (Multiprotocol Label Switching-MPLS) teknolojileri kullanılmıştır. Sonrasında, yönlendiriciler üzerinde E-pipe (Ethernet Pipe) ve Sanal Özel LAN Hizmetleri (Virtual private LAN services- VPLS) konfigurasyonları yapılmıştır. Güncel ağ veri trafiğini örneklemek amacıyla da üç ayrı test yapılmıştır. Yönlendiricilerin konfigürasyonları ise Secure-CRT ve yeni geliştirilmekte olan i-Gen yazılımı ile yapılmıştır. I-Gen ile birden fazla cihaz konfigürasyonu, kullanıcı dostu bir arayüz ile yapılabilmektedir. Kullanıcı, Secure CRT’den tek tek ayarları girmek yerine i-Gen yazılımı ile sistemin çalışması için gerekli olan değerleri girerek cihazların konfigürasyonunu kolayca üretebilmektedir. Çalışmamızda, Windows işletim sisteminde yönlendirici konfigürasyonları için en çok tercih edilen Secure-CRT yazılımı ile Alcatel-Lucent tarafından geliştirilen i-Gen yazılımları ele alınmış, iki ayrı konfigürasyon programı üzerinde çalışılmış ve elde edilen çıktılar yorumlanmıştır. Sonuç olarak, oldukça vakit alan Secure-CRT yönlendirici konfigürasyonu yerine yeni geliştirilmekte olan i-Gen yazılımının kullanımı ile kullanıcıların iş yükünün büyük ölçüde azaldığı görülmüştür.
Primary Language | Turkish |
---|---|
Subjects | Computer Software |
Journal Section | Technical Notes |
Authors | |
Publication Date | June 12, 2015 |
Submission Date | January 14, 2015 |
Published in Issue | Year 2015 Volume: 20 Issue: 2 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.