BibTex RIS Cite

KATI-HAL YÖNTEMİ İLE DÜŞÜK SICAKLIKLARDA LABO3 ÜRETİMİ VE KARAKTERİZASYONU

Year 2016, Volume: 21 Issue: 2, 227 - 236, 03.11.2016
https://doi.org/10.17482/uujfe.91099

Abstract

Nadir toprak (Lantanit serisi) boratları, yüksek vakum ultraviyole şeffaflığına, büyük elektronik bant boşluğuna, kimyasal ve çevresel güvenilirliğe ve son derece geniş optik hasar eşiğine sahiptir. Bu özelliklerinden dolayı plazma ekran panellerinin geliştirilmesinde kullanılmaktadır. Bu çalışmada, katı-hal yöntemi ile lantan borat üretimi çalışılmıştır. Bu amaçla, lantan oksit (La2O3) ve borik asit (H3BO3) sırası ile lantan ve bor kaynağı olarak kullanılmıştır. Farklı elementel La ve B oranları (La2O3:H3BO3 olarak 3:1 den 1:6 ya kadar) katı-hal yöntemi ile 500°C - 700°C reaksiyon sıcaklıklarında, 4 saat süre ile reaksiyona sokulmuşlardır. Sentez sonrası ürünlerin karakterizasyonu X-ışınları difraktometresi (XRD), Fourier dönüşümlü kızıl ötesi spektroskopisi (FT-IR), Raman spektroskopisi ve taramalı electron mikroskobu (SEM) teknikleri ile gerçekleştirilmiştir. Deney sonuçlardan görüldüğü üzere, La3BO6, LaBO3 ve La(BO2)3 yapısında üç farklı lantan borat bileşiği farklı parameterlerde saptanmıştır. Elde edilen farklı lantan borat bileşiklerinden LaBO3 bileşiği major faz olarak elde edilmiştir.

References

  • Badan, C. (2012) Microwave assisted synthesis of rare earth ions doped lanthanum orthoborate, their characterizations and ınvestigations of luminescence properties, The Graduate School of Natural and Applied Sciences, M. Sc. Thesis, Middle East Technical University, Ankara.
  • Doi, Y., Satou, T. and Hinatsu, Y. (2013) Crystal structures and magnetic properties of lanthanide containing borates LnM(BO3)2 (Ln=Y, Ho–Lu; M=Sc, Cr), Journal of Solid State Chemistry, 206, 151-157. doi: 10.1016/j.jssc.2013.08.015
  • Harben, P. W., Kužvart, M. (1996) Industrial minerals: a global geology. Industrial Minerals Information Ltd, London.
  • Hu, Z. S., Dong, J. X., Chen, G. X. and He, J. Z. (2000) Preparation and tribological properties of nanoparticle lanthanum borate, Wear, 243, 43-47. doi: 10.1016/S0043-1648(00)00415-4
  • Jun, L., Shiyang, G., Shuping, X., Bing, L. and Rongzu, H. (1997) Thermochemistry of Hydrated Magnesium Borates, The Journal of Chemical Thermodynamics, 29, 491-497.
  • Kıpçak, A. S. (2013), Çeşitli Magnezyum ve bor kaynaklarından farklı yöntemler ile yapay magnezyum borat üretimi ve üretim parametrelrinin ı̇ncelemesi, Doktora Tezi, Yıldız Teknik Üniversitesi, Fen Bilimleri Enstitüsü, İstanbul.
  • Kipcak, A. S., Moroydor Derun, E. and Piskin S. (2014) Synthesis and characterization of magnesium borate minerals of admontite and mcallisterite obtained via ultrasonic mixing of magnesium oxide and various sources of boron: a novel method, Turkish Journal of Chemistry, 38, 792-805. doi: 10.3906/kim-1307-61
  • Kipcak, A. S., Yildirim, M., Aydin Yuksel, S., Moroydor Derun, E. and Piskin S. (2014) The synthesis and physical properties of magnesium borate mineral of admontite synthesized from sodium borates, Advances in Materials Science and Engineering, 2014, ID 819745. doi: 10.1155/2014/819745
  • Lemanceau S., Bertrand-Chadeyron, G., Mahiou, R., El-Ghozzi, M., Cousseins, J. C. and Conflant, P. (1999) Synthesis and Characterization of H-LnBO3 Orthoborates (Ln:La, Nd, Sm, and Eu), Journal of Solid State Chemistry, 148(2), 229-235. doi: 10.1006/jssc.1999.8437
  • Lin, J., Sheptyakov, D., Wang, Y. and Allenspach, P. (2004) Structures and phase transition of vaterite-type rare earth orthoborates: a neutron diffraction study, Chemistry of Materials, 16, 2418-2424. doi: 10.1021/cm0499388
  • Ma, J., Wu, Q. (2007) Assembly and deagglomeration of lanthanum orthoborate nanobundles, Journal of the American Ceramic Society, 90(12), 3890-3895. doi: 10.1111/j.1551-2916.2007.02071.x
  • Moroydor Derun, E., Kipcak, A.S., Senberber, F. T. and Sari Yilmaz, M. (2015) Characterization and thermal dehydration kinetics of admontite mineral hydrothermally synthesized from magnesium oxide and boric acid precursor, Research on Chemical Intermediates, 41,853–866. doi: 10.1007/s11164-013-1237-6
  • Rajaramakrishna, R., Karuthedath, S., Anavekar, R. V. and Jain, M. (2012) Nonlinear optical studies of lead lanthanum borate glass doped with Au nanoparticles, Journal of Non-Crystalline Solids, 358(14), 1667-1672. doi: 10.1016/j.jnoncrysol.2012.04.031
  • Shmyt’ko, I. M., Kiryakin, I. N. and Strukova, G. K. (2013) Features of LaBO3 phase formation during solid phase synthesis from the amorphous precursor state, Physics of the Solid State, 55(7), 1468-1475. doi: 10.1134/S1063783413070305
  • T. R. Prime Ministry SPO (2006) Boron Operations Group report: Ninth development plan (2007–2013), Chemical Industry Private Expertise Commission.
  • Woods, W. G. (1994) An Introduction to Boron: History, Sources, Uses and Chemistry, Office of Environmental Health and Safety, Environ Health Perspect,102 (Suppl 7), 5-11.
  • Yongzhong, J., Shiyang, G. Shuping, X. and Jun, L. (2000) FT-IR spectroscopy of supersaturated aqueous solutions of magnesium borate, Spectrochimica Acta Part A, 56, 1291–1297. doi: 10.1016/S1386-1425(99)00227-9

Low Temperature Solid-State Synthesis and Characterization of LaBO3

Year 2016, Volume: 21 Issue: 2, 227 - 236, 03.11.2016
https://doi.org/10.17482/uujfe.91099

Abstract

Rare earth (lanthanide series) borates, possess high vacuum ultraviolet (VUV) transparency, large electronic band gaps, chemical and environmental stability and exceptionally large optical damage thresholds and used in the development of plasma display panels (PDPs). In this study the synthesis of lanthanum borates via solid-state method is studied. For this purpose, lanthanum oxide (La2O3) and boric acid (H3BO3) are used for as lanthanum and boron sources, respectively. Different elemental molar ratios of La to B (between 3:1 to 1:6 as La2O3:H3BO3) were reacted by solid-state method at the reaction temperatures between 500°C - 700°C with the constant reaction time of 4 h. Following the synthesis, characterizations of the synthesized products are conducted by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy and scanning electron microscope (SEM). From the results of the experiments, three types of lanthanum borates of; La3BO6, LaBO3 and La(BO2)3 were observed at different reaction parameters. Among these three types of lanthanum borates LaBO3 phase were obtained as a major phase.

References

  • Badan, C. (2012) Microwave assisted synthesis of rare earth ions doped lanthanum orthoborate, their characterizations and ınvestigations of luminescence properties, The Graduate School of Natural and Applied Sciences, M. Sc. Thesis, Middle East Technical University, Ankara.
  • Doi, Y., Satou, T. and Hinatsu, Y. (2013) Crystal structures and magnetic properties of lanthanide containing borates LnM(BO3)2 (Ln=Y, Ho–Lu; M=Sc, Cr), Journal of Solid State Chemistry, 206, 151-157. doi: 10.1016/j.jssc.2013.08.015
  • Harben, P. W., Kužvart, M. (1996) Industrial minerals: a global geology. Industrial Minerals Information Ltd, London.
  • Hu, Z. S., Dong, J. X., Chen, G. X. and He, J. Z. (2000) Preparation and tribological properties of nanoparticle lanthanum borate, Wear, 243, 43-47. doi: 10.1016/S0043-1648(00)00415-4
  • Jun, L., Shiyang, G., Shuping, X., Bing, L. and Rongzu, H. (1997) Thermochemistry of Hydrated Magnesium Borates, The Journal of Chemical Thermodynamics, 29, 491-497.
  • Kıpçak, A. S. (2013), Çeşitli Magnezyum ve bor kaynaklarından farklı yöntemler ile yapay magnezyum borat üretimi ve üretim parametrelrinin ı̇ncelemesi, Doktora Tezi, Yıldız Teknik Üniversitesi, Fen Bilimleri Enstitüsü, İstanbul.
  • Kipcak, A. S., Moroydor Derun, E. and Piskin S. (2014) Synthesis and characterization of magnesium borate minerals of admontite and mcallisterite obtained via ultrasonic mixing of magnesium oxide and various sources of boron: a novel method, Turkish Journal of Chemistry, 38, 792-805. doi: 10.3906/kim-1307-61
  • Kipcak, A. S., Yildirim, M., Aydin Yuksel, S., Moroydor Derun, E. and Piskin S. (2014) The synthesis and physical properties of magnesium borate mineral of admontite synthesized from sodium borates, Advances in Materials Science and Engineering, 2014, ID 819745. doi: 10.1155/2014/819745
  • Lemanceau S., Bertrand-Chadeyron, G., Mahiou, R., El-Ghozzi, M., Cousseins, J. C. and Conflant, P. (1999) Synthesis and Characterization of H-LnBO3 Orthoborates (Ln:La, Nd, Sm, and Eu), Journal of Solid State Chemistry, 148(2), 229-235. doi: 10.1006/jssc.1999.8437
  • Lin, J., Sheptyakov, D., Wang, Y. and Allenspach, P. (2004) Structures and phase transition of vaterite-type rare earth orthoborates: a neutron diffraction study, Chemistry of Materials, 16, 2418-2424. doi: 10.1021/cm0499388
  • Ma, J., Wu, Q. (2007) Assembly and deagglomeration of lanthanum orthoborate nanobundles, Journal of the American Ceramic Society, 90(12), 3890-3895. doi: 10.1111/j.1551-2916.2007.02071.x
  • Moroydor Derun, E., Kipcak, A.S., Senberber, F. T. and Sari Yilmaz, M. (2015) Characterization and thermal dehydration kinetics of admontite mineral hydrothermally synthesized from magnesium oxide and boric acid precursor, Research on Chemical Intermediates, 41,853–866. doi: 10.1007/s11164-013-1237-6
  • Rajaramakrishna, R., Karuthedath, S., Anavekar, R. V. and Jain, M. (2012) Nonlinear optical studies of lead lanthanum borate glass doped with Au nanoparticles, Journal of Non-Crystalline Solids, 358(14), 1667-1672. doi: 10.1016/j.jnoncrysol.2012.04.031
  • Shmyt’ko, I. M., Kiryakin, I. N. and Strukova, G. K. (2013) Features of LaBO3 phase formation during solid phase synthesis from the amorphous precursor state, Physics of the Solid State, 55(7), 1468-1475. doi: 10.1134/S1063783413070305
  • T. R. Prime Ministry SPO (2006) Boron Operations Group report: Ninth development plan (2007–2013), Chemical Industry Private Expertise Commission.
  • Woods, W. G. (1994) An Introduction to Boron: History, Sources, Uses and Chemistry, Office of Environmental Health and Safety, Environ Health Perspect,102 (Suppl 7), 5-11.
  • Yongzhong, J., Shiyang, G. Shuping, X. and Jun, L. (2000) FT-IR spectroscopy of supersaturated aqueous solutions of magnesium borate, Spectrochimica Acta Part A, 56, 1291–1297. doi: 10.1016/S1386-1425(99)00227-9
There are 17 citations in total.

Details

Journal Section Research Articles
Authors

Azmi Seyhun Kıpçak

Publication Date November 3, 2016
Submission Date January 18, 2016
Published in Issue Year 2016 Volume: 21 Issue: 2

Cite

APA Kıpçak, A. S. (2016). KATI-HAL YÖNTEMİ İLE DÜŞÜK SICAKLIKLARDA LABO3 ÜRETİMİ VE KARAKTERİZASYONU. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 21(2), 227-236. https://doi.org/10.17482/uujfe.91099
AMA Kıpçak AS. KATI-HAL YÖNTEMİ İLE DÜŞÜK SICAKLIKLARDA LABO3 ÜRETİMİ VE KARAKTERİZASYONU. UUJFE. November 2016;21(2):227-236. doi:10.17482/uujfe.91099
Chicago Kıpçak, Azmi Seyhun. “KATI-HAL YÖNTEMİ İLE DÜŞÜK SICAKLIKLARDA LABO3 ÜRETİMİ VE KARAKTERİZASYONU”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 21, no. 2 (November 2016): 227-36. https://doi.org/10.17482/uujfe.91099.
EndNote Kıpçak AS (November 1, 2016) KATI-HAL YÖNTEMİ İLE DÜŞÜK SICAKLIKLARDA LABO3 ÜRETİMİ VE KARAKTERİZASYONU. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 21 2 227–236.
IEEE A. S. Kıpçak, “KATI-HAL YÖNTEMİ İLE DÜŞÜK SICAKLIKLARDA LABO3 ÜRETİMİ VE KARAKTERİZASYONU”, UUJFE, vol. 21, no. 2, pp. 227–236, 2016, doi: 10.17482/uujfe.91099.
ISNAD Kıpçak, Azmi Seyhun. “KATI-HAL YÖNTEMİ İLE DÜŞÜK SICAKLIKLARDA LABO3 ÜRETİMİ VE KARAKTERİZASYONU”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 21/2 (November 2016), 227-236. https://doi.org/10.17482/uujfe.91099.
JAMA Kıpçak AS. KATI-HAL YÖNTEMİ İLE DÜŞÜK SICAKLIKLARDA LABO3 ÜRETİMİ VE KARAKTERİZASYONU. UUJFE. 2016;21:227–236.
MLA Kıpçak, Azmi Seyhun. “KATI-HAL YÖNTEMİ İLE DÜŞÜK SICAKLIKLARDA LABO3 ÜRETİMİ VE KARAKTERİZASYONU”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, vol. 21, no. 2, 2016, pp. 227-36, doi:10.17482/uujfe.91099.
Vancouver Kıpçak AS. KATI-HAL YÖNTEMİ İLE DÜŞÜK SICAKLIKLARDA LABO3 ÜRETİMİ VE KARAKTERİZASYONU. UUJFE. 2016;21(2):227-36.

Cited By

Announcements:

30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.