Abstract
References
- 1. Çavdar, K. ve Tanrısever, T. (2013) Farklı malzemelerin lazerle kesilmesi, Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 18(2), 79-99. 2018.
- 2. Durukan, Z., Motorcu, A.R. ve Güllü, A. (2014) AISI 304 çeliğini farklı geometrilerde lazerle kesmede parametrelerin boyutsal doğruluk üzerine etkilerinin modellenmesi, Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 29(3), 505-515.
- 3. Fomin, V.M., Golyshev, A.A., Malikov, A.G., Orishich, A.M. ve Shulyat’ev, V.B. (2015) Mechanical characteristics of high-quality laser cutting of steel by fiber and CO2 lasers, Journal of Applied Mechanics and Technical Physics, 56(4), 726–735. doi.org/10.1134/S0021894415040203
- 4. Karthikeyan, R., Senthilkumar, V., Thilak, M. ve Nagadeepan, A. (2018) Application of grey relational analysis for optimization of kerf quality during CO2 laser cutting of mild steel, Materials Today: Proceedings, 5(9), 19209–19215. doi.org/10.1016/j.matpr.2018.06.276
- 5. Kotadiya, D.J., Kapopara, J.M., Patel, A.R., Dalwadi, C.G. ve Pandya D.H. (2018) Parametric analysis of process parameter for Laser cutting process on SS-304, Materials Today: Proceedings, 5(2), 5384–5390. doi.org/10.1016/j.matpr.2017.12.124
- 6. Kotadiya, D.J. ve Pandya, D.H. (2016) Parametric Analysis of Laser Machining with Response Surface Method on SS-304, Procedia Technology, 23, 376–382. doi.org/10.1016/j.protcy.2016.03.040
- 7. Dubey, A.K. ve Yadava, V. (2008) Multi-objective optimisation of laser beam cutting process, Optics and Laser Technology, 40(3), 562–570. doi.org/10.1016/j.optlastec.2007.09.002
- 8. Mullick, S., Agrawal, A.P. ve Nath A.K. (2016) Effect of laser incidence angle on cut quality of 4 mm thick stainless steel sheet using fiber laser, Optics and Laser Technology, 81, 168–179. doi.org/10.1016/j.optlastec.2016.02.006
- 9. Parthiban, A., Chandrasekaran, M. ve Sathish, S. (2018) Optimization of CO2 Laser Cutting of Stainless Steel Sheet for Curved Profile, Materials Today: Proceedings, 5(6), 14531–14538. doi.org/10.1016/j.matpr.2018.03.042
- 10. Rana, R.S., Chouksey, R., Dhakad, K.K. ve Paliwal, D. (2018) Optimization of process parameter of Laser beam machining of high strength steels: A review, Materials Today: Proceedings, 5(9), 19191–19199. doi.org/10.1016/j.matpr.2018.06.274
- 11. Stelzer, S., Mahrle, A., Wetzig, A. ve Beyer, E. (2013) Experimental investigations on fusion cutting stainless steel with fiber and CO2 laser beams, Physics Procedia, 41, 399–404. doi.org/10.1016/j.phpro.2013.03.093
- 12. Wandera, C. ve Kujanpää, V. (2011) Optimization of parameters for fibre laser cutting of a 10 mm stainless steel plate, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(5), 641–649. doi.org/10.1177/2041297510394078
- 13. Wandera, C., Kujanpää, V. ve Salminen, A. (2011) Laser power requirement for cutting thick-section steel and effects of processing parameters on mild steel cut quality, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(5), 651–661. doi.org/10.1177/09544054JEM1971
- 14. Wandera, C., Salminen, A. ve Kujanpää, V. (2009) Inert gas cutting of thick-section stainless steel and medium-section aluminum using a high power fiber laser, Journal of Laser Applications, 21(3), 154–161. doi.org/10.2351/1.3184429
- 15. Yilbas, B.S., Shaukat, M.M. ve Ashraf, F. (2017) Laser cutting of various materials: Kerf width size analysis and life cycle assessment of cutting process. Optics and Laser Technology, 93, 67–73. doi.org/10.1016/j.optlastec.2017.02.014
Abstract
Günümüzde lazer
ışını ile kesme yöntemi modern malzeme kesme yöntemleri arasında maliyet ve
kalite açısından üstün özellikleri nedeni ile öne çıkmaktadır. Özellikle lazer
kesme yöntemi, imalat sektöründeki birçok uygulamada kullanılan paslanmaz
çeliklerin kesilmesinde çok önemli avantajlara sahiptir. Bu çalışma kapsamında
304 kalite paslanmaz çelik malzemenin fiber lazer ile kesilmesinde lazer gücü,
kesme hızı ve odak mesafesinin kesilen yüzeylerin pürüzlülüğü ve kerf genişliği
üzerindeki etkileri incelenmiştir. Box-Behnken deney tasarımına göre parametre çiftleri
belirlenerek kesme işlemi gerçekleştirilmiş ve yüzey pürüzlülükleri ile kerf
genişlikleri ölçülmüştür. İşlem parametrelerinin tekil ve etkileşimli etkilerini
belirlemek için varyans analizi (ANOVA) uygulanmıştır. Yüzey pürüzlülükleri ve
kerf genişlikleri için cevap yüzeyi fonksiyonları belirlenmiş ve istenebilirlik
fonksiyonu yaklaşımı ile optimum proses parametreleri tespit edilmiştir.
Yapılan çalışma sonucunda yüzey pürüzlülüğü ve kerf genişliği üzerindeki en
etkili parametrenin odak mesafesi olduğu, ilerleme hızının etkisinin sınırlı
kaldığı görülmüştür.
References
- 1. Çavdar, K. ve Tanrısever, T. (2013) Farklı malzemelerin lazerle kesilmesi, Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 18(2), 79-99. 2018.
- 2. Durukan, Z., Motorcu, A.R. ve Güllü, A. (2014) AISI 304 çeliğini farklı geometrilerde lazerle kesmede parametrelerin boyutsal doğruluk üzerine etkilerinin modellenmesi, Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 29(3), 505-515.
- 3. Fomin, V.M., Golyshev, A.A., Malikov, A.G., Orishich, A.M. ve Shulyat’ev, V.B. (2015) Mechanical characteristics of high-quality laser cutting of steel by fiber and CO2 lasers, Journal of Applied Mechanics and Technical Physics, 56(4), 726–735. doi.org/10.1134/S0021894415040203
- 4. Karthikeyan, R., Senthilkumar, V., Thilak, M. ve Nagadeepan, A. (2018) Application of grey relational analysis for optimization of kerf quality during CO2 laser cutting of mild steel, Materials Today: Proceedings, 5(9), 19209–19215. doi.org/10.1016/j.matpr.2018.06.276
- 5. Kotadiya, D.J., Kapopara, J.M., Patel, A.R., Dalwadi, C.G. ve Pandya D.H. (2018) Parametric analysis of process parameter for Laser cutting process on SS-304, Materials Today: Proceedings, 5(2), 5384–5390. doi.org/10.1016/j.matpr.2017.12.124
- 6. Kotadiya, D.J. ve Pandya, D.H. (2016) Parametric Analysis of Laser Machining with Response Surface Method on SS-304, Procedia Technology, 23, 376–382. doi.org/10.1016/j.protcy.2016.03.040
- 7. Dubey, A.K. ve Yadava, V. (2008) Multi-objective optimisation of laser beam cutting process, Optics and Laser Technology, 40(3), 562–570. doi.org/10.1016/j.optlastec.2007.09.002
- 8. Mullick, S., Agrawal, A.P. ve Nath A.K. (2016) Effect of laser incidence angle on cut quality of 4 mm thick stainless steel sheet using fiber laser, Optics and Laser Technology, 81, 168–179. doi.org/10.1016/j.optlastec.2016.02.006
- 9. Parthiban, A., Chandrasekaran, M. ve Sathish, S. (2018) Optimization of CO2 Laser Cutting of Stainless Steel Sheet for Curved Profile, Materials Today: Proceedings, 5(6), 14531–14538. doi.org/10.1016/j.matpr.2018.03.042
- 10. Rana, R.S., Chouksey, R., Dhakad, K.K. ve Paliwal, D. (2018) Optimization of process parameter of Laser beam machining of high strength steels: A review, Materials Today: Proceedings, 5(9), 19191–19199. doi.org/10.1016/j.matpr.2018.06.274
- 11. Stelzer, S., Mahrle, A., Wetzig, A. ve Beyer, E. (2013) Experimental investigations on fusion cutting stainless steel with fiber and CO2 laser beams, Physics Procedia, 41, 399–404. doi.org/10.1016/j.phpro.2013.03.093
- 12. Wandera, C. ve Kujanpää, V. (2011) Optimization of parameters for fibre laser cutting of a 10 mm stainless steel plate, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(5), 641–649. doi.org/10.1177/2041297510394078
- 13. Wandera, C., Kujanpää, V. ve Salminen, A. (2011) Laser power requirement for cutting thick-section steel and effects of processing parameters on mild steel cut quality, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(5), 651–661. doi.org/10.1177/09544054JEM1971
- 14. Wandera, C., Salminen, A. ve Kujanpää, V. (2009) Inert gas cutting of thick-section stainless steel and medium-section aluminum using a high power fiber laser, Journal of Laser Applications, 21(3), 154–161. doi.org/10.2351/1.3184429
- 15. Yilbas, B.S., Shaukat, M.M. ve Ashraf, F. (2017) Laser cutting of various materials: Kerf width size analysis and life cycle assessment of cutting process. Optics and Laser Technology, 93, 67–73. doi.org/10.1016/j.optlastec.2017.02.014
Details
| Primary Language | Turkish |
|---|---|
| Subjects | Engineering |
| Journal Section | Research Articles |
| Authors | |
| Publication Date | August 30, 2019 |
| Submission Date | January 17, 2019 |
| Acceptance Date | July 10, 2019 |
| Published in Issue | Year 2019 Volume: 24 Issue: 2 |
Cite
Cited By
INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD
Uludağ University Journal of The Faculty of Engineering
https://doi.org/10.17482/uumfd.1220597
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.