Bu çalışmada farklı atkı sıklığı ve iplik numaralarından oluşan dokuma kumaşların örtme faktörü ve gözeneklilik parametreleri ile ses yutuculuk davranışları arasındaki ilişki incelenmiştir. Bu amaçla üç farklı atkı sıklığı ve dört farklı numarada atkı ipliği kullanılarak dokuma kumaşlar üretilmiştir. Kumaşların gramaj, kalınlık, hava geçirgenliği, gözenek oranı ve ses yutuculuk katsayıları ölçülmüştür. Kalın iplik kullanımı ve sıklık artışı kumaştaki gözenek oranını ve hava geçirgenlik değerlerini düşürmüş, bunun yanında kumaşın ses yutuculuk katsayısı değerlerinde artışa sebep olmuştur. Kumaş sıklığı ve iplik numarası parametrelerini tek bir değişkene indirgemesi açısından faydalı olabilecek örtme faktörü değerleri hesaplanmıştır. Örtme faktörü yüksek kumaşların daha küçük gözeneklere sahip olduğu ve hava geçirgenliklerinin daha düşük olduğu gösterilmiştir. Artan örtme faktörü ile birlikte dokuma kumaşların daha iyi ses yutuculuk performansı gösterdiği tespit edilmiştir.
In this study, the relationship between the cover factor and porosity parameters of woven fabrics consisting of different weft density and yarn counts and the sound absorption behavior were investigated. For this purpose, woven fabrics were produced using three different weft density and four different weft thread counts. Mass per unit area, thickness, air permeability, pore ratio and sound absorption coefficients of the fabrics were measured. The use of thick yarns and the increase in weft density decreased the fabric pore ratio and air permeability values, besides, they caused an increase in the sound absorption coefficient values of the fabric. Cover factor values that can be useful in reducing the fabric density and yarn count parameters to a single variable have been calculated. It has been shown that fabrics with high cover factor have smaller pores and lower air permeability. It has been determined that woven fabrics show better sound absorption performance with increasing cover factor.
Primary Language | Turkish |
---|---|
Subjects | Wearable Materials |
Journal Section | Research Articles |
Authors | |
Publication Date | August 31, 2020 |
Submission Date | April 8, 2020 |
Acceptance Date | May 18, 2020 |
Published in Issue | Year 2020 Volume: 25 Issue: 2 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.