Final Color of CAD-CAM Produced Thin Lithium Disilicate Ceramics Cemented with Different Colored Resin Cements on Darker Backgrounds

Yıl 2023, Cilt: 12 Sayı: 2, 234 - 241, 13.05.2023

Merve Bankoğlu Güngör

https://doi.org/10.54617/adoklinikbilimler.1229242

Öz

Aim: The aim of the present study was to evaluate the final color of CAD-CAM produced thin lithium disilicate ceramics cemented with A2, opaque, and bleach resin cements on darker backgrounds.
Materials and Method: Nine different experimental groups (n=10) were generated according to the colors of resin backgrounds (ND3:A3, ND4:A3.5, and ND8:A4) and cements (A2, opaque, and bleach). Target specimen was prepared by cementing lithium disilicate ceramic layer onto ND2 (A2) background by using translucent resin cement. The color difference values between experimental groups and target specimen were calculated according to CIEDE2000 formula. The data were statistically analyzed by using Kruskall Wallis test (α=0.05).
Results: The results showed that most of the experimental groups had higher color difference values than acceptability threshold (1.8) except ND3-A2 and ND3-opaque groups. It was observed that when the background got darker, the color difference values increased.
Conclusion: The darker backgrounds (A3, A3.5, and A4) and resin cement color (A2, opaque, and bleach) affected the final color of the lithium disilicate ceramics in 1 mm thickness. Color difference values were found in clinically acceptable limits for cementing lithium disilicate ceramics with A2 and opaque resin cements on A3 background.

Anahtar Kelimeler

Color, Computer-aided design, Lithia-disilicate

Koyu Arka Plan Üzerine Farklı Renkteki Simanlarla Simante Edilen İnce Lityum Disilikat Seramiklerin Sonuç Rengi

Öz

Amaç: Bu çalışmanın amacı, koyu arka plan üzerine farklı renklerdeki (A2, opak ve bleach) rezin simanlar ile simante edilen CAD-CAM sisteminde üretilen ince lityum disilikat seramiklerin sonuç rengini değerlendirmektir.
Gereç ve Yöntem: Farklı arka plan (ND3:A3, ND4:A3.5 ve ND8:A4) ve rezin siman renklerine (A2, opak ve bleach) göre dokuz farklı deney grubu oluşturuldu (n=10). Hedef renge sahip
örnek, lityum disilikat seramik tabakanın ND2 (A2) arka plan üzerine translusent rezin siman ile simantasyonuyla hazırlandı. Hedef örnek ve deney grupları arasındaki renk farkı değerleri CIEDE2000 formülü kullanılarak hesaplandı. Veriler Kruskall Wallis testiyle istatistik olarak analiz edildi (α=0.05).
Bulgular: ND3-A2 ve ND3-opak grupları dışındaki deney grupları, kabul edilebilirlik eşik değerinin (1.8) üzerinde renk farkı değerleri gösterdi. Arka plan rengi koyulaştığında, renk farkı değerlerinin yükseldiği belirlendi.
Sonuç: Daha koyu arka plan (A3, A3.5 ve A4) ve siman rengi (A2, opak ve bleach) 1 mm kalınlığındaki lityum disilikat seramiklerin sonuç rengini etkilemektedir. A2 ve opak renklerdeki rezin simanlar ile A3 arka plan üzerine simante edilen lityum disilikat seramiklerde renk farkı değerleri klinik olarak kabul edilebilir sınırlar içindedir.

Anahtar Kelimeler

Bilgisayar yardımlı tasarım, Lityum disilikat, Renk

Kaynakça

• Iravani M, Shamszadeh S, Panahandeh N, Sheikh-Al-Eslamian SM, Torabzadeh H. Shade reproduction and the ability of lithium disilicate ceramics to mask dark substrates. Restor Dent Endod 2020;45:e41.
• Ellakany P, Madi M, Aly NM, Al-Aql ZS, AlGhamdi M, AlJeraisy A, et al. Effect of CAD/CAM ceramic thickness on shade masking ability of discolored teeth: in vitro study. Int J Environ Res Public Health 2021;18:13359.
• Hernandes DK, Arrais CA, Lima Ed, Cesar PF, Rodrigues JA. Influence of resin cement shade on the color and translucency of ceramic veneers. J Appl Oral Sci 2016;24:391-6.
• Kandil BSM, Hamdy AM, Aboelfadl AK, El-Anwar MI. Effect of ceramic translucency and luting cement shade on the color masking ability of laminate veneers. Dent Res J (Isfahan). 2019;16:193-9.
• Tabatabaei MH, Matinfard F, Ahmadi E, Omrani LR, Mahounak FS. Color stability of ceramic veneers cemented with self-adhesive cements after accelerated aging. Front Dent 2019;16:393-401.
• Czigola A, Abram E, Kovacs ZI, Marton K, Hermann P, Borbely J. Effects of substrate, ceramic thickness, translucency, and cement shade on the color of CAD/CAM lithium‐disilicate crowns. J Esthet Restor Dent 2019;31:457-64.
• Günal-Abduljalil B, Ulusoy MM. The effect of resin cement shade and restorative material type and thickness on the final color of resin-matrix ceramics. J Prosthodont Res 2022;66:75-82.
• Willard A, Chu T-MG. The science and application of IPS e.max dental ceramic. The Kaohsiung J Med Sci 2018;34:238-42.
• Phark JH, Duarte S Jr. Microstructural considerations for novel lithium disilicate glass ceramics: A review. J Esthet Restor Dent 2022;34:92-103.
• Zarone F, Di Mauro MI, Ausiello P, Ruggiero G, Sorrentino R. Current status on lithium disilicate and zirconia: a narrative review. BMC Oral Health 2019;19:134.
• Begum Z, Chheda P, Shruthi C, Sonika R. Effect of ceramic thickness and luting agent shade on the color masking ability of laminate veneers. J Indian Prosthodont Soc 2014;14:46-50.
• International Organization for Standardization ISO/TR 28642:2016. Technical Report (E): Dentistry - Guidance on Color Measurements Switzerland: ISO, Geneva (2016).
• Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, et al. Color difference thresholds in dentistry. J Esthet Restor Dent 2015;27 Suppl 1:S1-9.
• Paravina RD, Pérez MM, Ghinea R. Acceptability and perceptibility thresholds in dentistry: a comprehensive review of clinical and research applications. J Esthet Restor Dent 2019;31:103-12.
• Pires LA, Novais PM, Araújo VD, Pegoraro LF. Effects of the type and thickness of ceramic, substrate, and cement on the optical color of a lithium disilicate ceramic. J Prosthet Dent 2017;117:144-9.
• Tabatabaian F, Karimi M, Namdari M. Color match of high translucency monolithic zirconia restorations with different thicknesses and backgrounds. J Esthet Restor Dent 2020;32:615-21.
• Basso GR, Kodama AB, Pimentel AH, Kaizer MR, Bona AD, Moraes RR, et al. Masking colored substrates using monolithic and bilayer CAD-CAM ceramic structures. Oper Dent 2017;42:387-95.
• De Azevedo Cubas GB, Camacho GB, Demarco FF, Pereira-Cenci T. The effect of luting agents and ceramic thickness on the color variation of different ceramics against a chromatic background. Eur J Dent 2011;5:245-52.
• Dai S, Chen C, Tang M, Chen Y, Yang L, He F, et al. Choice of resin cement shades for a high-translucency zirconia product to mask dark, discolored or metal substrates. J Adv Prosthodont 2019;11:286-96.
• Li Q. Effects of luting composites on the resultant colors of ceramic veneers to intended shade tab. J Prosthodont 2019;28:327-31.