FARKLI İÇERİK VE KALINLIKTAKİ TAM SERAMİK RESTORASYONLARIN TRANSLUSENTLİK DEĞERLERİNİN KARŞILAŞTIRILMASI

Yıl 2017, Cilt: 27 Sayı: 3, 124 - 129, 03.12.2017

İlkin Tuncel , İşıl Turp

https://doi.org/10.17567/ataunidfd.381280

Öz

Amaç: Bu çalışmanın amacı farklı kalınlıklarda ve farklı
yapıdaki tam seramik materyallerinin translusenstlik değerlerini incelemektir.
Gereç ve Yöntem: Beş farklı seramikten (feldspatik, lösit ile
güçlendirilmiş, lityumdisilikat ile güçlendirilmiş,
altyapı zirkonya,
monolitik zirkonya) ve iki farklı kalınlıkta (0,5-1 mm) örnekler
hazırlanmıştır. Her bir grup için örnek sayısı beş olarak saptanmıştır.
Örneklerin kontrastlık oranlarını elde etmek için elde etmek için
spektrofotometreyle beyaz zemin (L*w) ve siyah
zemin (L*b) üzerinde üçer adet ölçüm gerçekleştirilmiştir. Veriler iki yönlü
varyans analizi ile değerlendirilmiştir. Gruplar arası
karşılaştırmalar için Tukey’s HSD testi kullanılmıştır.

Bulgular: 0,5 mm kalınlıktaki gruplar kendi aralarında
karşılaştırıldığında feldspatik ve lösit ile güçlendirilmiş cam seramik dışında
bütün gruplar arasında istatistiksel olarak anlamlı
farklılıklar görülmüştür. 1 mm kalınlığındaki gruplar kendi aralarında
karşılaştırıldığında altyapı zirkonya ve monolitik zirkonya dışında bütün
gruplar arasında istatistiksel olarak anlamlı farklılık bulunmuştur.

Sonuç: Kalınlık ve yapısal farklılıklar seramiğin translusensi
özelliğini etkilemektedir.

Anahtar Kelimeler: Tam seramik,  translusensi, kontrastlık
oranı

COMPARISON OF TRANSLUCENCY VALUES OF
ALL CERAMIC MATERIALS WITH DIFFERENT STRUCTURES AND THICKNESSES

ABSTRACT

Aim: The aim of the study
is to evaluate the translucency of all ceramic materials with different
thicknesses and structures.

Material and Methods: Specimens
with two different thicknesses (0.5-1 mm) were prepared from five different
ceramic materials (feldspathic, leucite-reinforced, lithium disilicate
reinforced, framework zirconia, monolithic zirconia). Each group contained five
specimens. Three measurements were made with spectrophotometry to obtain the
contrast ratios of the materials over a white background (L*w) and a black
background (L*b). The data was analysed by two-way analysis of variance. The
groups were compared by Tukey’s HSD test.

Results: Groups which have a
thickness of 0.5 mm had statistically significant differences except feldspatic
and leucite reinforced ceramic. Groups which have a thickness of 1 mm had
statistically significant differences except framework zirconia and monolithic
zirconia.

Conclusion: Thickness
and structural differences affects the translucency feature of ceramic.

Keywords: All ceramic, translucency,
contrast ratio

Anahtar Kelimeler

Tam seramik, translusensi

Kaynakça

• 1. Joiner A. Tooth colour: a review of the literature. J Dent 2004;32:3-12.
• 2. Dietschi D. Layering concepts in anterior composite restorations. J Adhes Dent 2001;3:71-80.
• 3. Ulu H, Bayındır F. Monolitik zirkonyum restorasyonlar. Atatürk Üniv Diş Hek Fak Derg 2016; Supp 15: 67-72.
• 4. Clarke FJ. Measurement of color of human teeth. In: McLean JW, editor. Proceedings of the First International Symposium on Ceramics. Chicago: Quintessence; 1983. p. 441-90.
• 5. Yu B, Ahn JS, Lee YK. Measurement of translucency of tooth enamel and dentin. Acta Odontol Scand 2009;67:57-64.
• 6. Kramer N, Ebert J, Petschelt A, Frankenberger R. Ceramic inlays bonded with two adhesives after 4 years. Dent Mater. 2006;22:13-21.
• 7. De Souza G, Braga RR, Cesar PF, Lopes GC. Correlation between clinical performance and degree of conversion of resin cements: a literature review. Appl Oral Sci. 2015 Jul-Aug;23(4):358-68.
• 8. Raigrodski AJ, Chiche GJ, Potiket N, Hochstedler JL, Mohamed SE, Billiot S, et al. The efficacy of posterior three-unit zirconiumoxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent 2006;96:237-44.
• 9. Della Bona A. Bonding to ceramics: scientific evidences for clinical dentistry. Sao Paulo: Artes Medicas; 2009: 252.
• 10. Sakaguchi RL, Powers JM. Fundamentals of materials science. In: Sakaguchi RL, Powers JM, editors. Craig’s restorative dental materials. 13th ed. Philadelphia: Elsevier Mosby; 2012. p. 33–81
• 11. Kelly JR, Nishimura I, Campbell SD. Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent 1996;75:18-32. 12. JA, Miller RB. The effect of core translucency on the aesthetics of all-ceramic restorations. Pract Periodontics Aesthet Dent 1997;9:567-74.
• 13. Kingery WD, Bowen HK, Uhlmann DR. Introduction to ceramics. 2nd ed. New York; John Wiley and Sons; 1976, p. 646- 89.
• 14. Berns RS. Principles of color technology. 3rd ed. New York; John Wiley and Sons, Inc; 2000, p. 8-9.
• 15. Mclean JW. New dental ceramics and esthetics. J Esthet Dent 1995;7:141-9.
• 16. Zhang HB, Kim BN, Morita K, Yoshida H, Lim JH, Hiraga K. Optimization of high-pressure sintering of transparent zirconia with nano-sized grains. J Alloy Compd 2010;508: 196-9.
• 17. Li Q, Yu H, Wang YN. Spectrophotometric evaluation of the optical influence of core build-up composites on all-ceramic materials. Dental Materials 2009;25:158–65.
• 18. Bagis B, Turgut S. Optical properties of current ceramics systems for laminate veneers. Journal of Dentistry 2013;41:24–30.
• 19. Barizon KTL, Bergeron C, Vargas MA, Qian F, Cobb DS, Gratton DG, et al. Ceramic materials for porcelain veneers. Part I: Correlation between translucency parameters and contrast ratio. J Prosthet Dent 2013;110:397–401.
• 20. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 2002;88:4-9.
• 21. Holloway JA, Miller RB. The effect of core translucency on the aesthetics of all-ceramic restorations. Pract Periodontics Aesthet Dent 1997;9:567-74.
• 22. Antonson SA, Anusavice KJ. Contrast ratio of veneering and core ceramics as a function of thickness. Int J Prosthodont 2001;14:316-20.
• 23. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 2002;88:4-9.
• 24. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. J Prosthet Dent 2002;88:10-5.
• 25. Chen YM, Smales RJ, Yip KH, Sung WJ. Translucency and biaxial flexural strength of four ceramic core materials. Dent Mater 2008,24:1506-11.
• 26. Wang F, Takahashi H, Iwasaki N. Translucency of dental ceramics with different thicknesses. J Prosthet Dent 2013;110:14-20.
• 27. Zirkonzahn web sitesi. http://www.zirkonzahn. com/en/prettau-zirconia/prettau-zirconia. Erişim: 24-09-2016.
• 28. Tuncel İ, Turp I, Üşümez A. Evaluation of translucency of monolithic zirconia and framework zirconia materials. J Adv Prosthodont 2016;8:181-6.
• 29. Pecho OE, Ghinea R, Ionescu AM, Cardona Jde L, Paravina RD, Pérez Mdel M. Color and translucency of zirconia ceramics, human dentine and bovine dentine. J Dent 2012;40:e34-40.
• 30. Ding Y, Jiang S, Luo T, Miura Y, Peyghambarian N. Lithium disilicate crystalline slab waveguides from surface crystallised glass. Electronics Letters 1999;35:504-5.
• 31. Kursoglu P, Karagoz Motro PF, Kazazoglu E. Translucency of ceramic material in different core-veneer combinations. J Prosthet Dent 2015;113:48-53.